Column solid-phase extraction of sunset yellow and spectrophotometric determination of its use in powdered beverage and confectionery products

International Journal of Food Science and Technology

Volumn 47, Issue 6, 2012, Pages 1253-1258

  Unsal, Yunus Emre ^a   Soylak, Mustafa ^b   Tuzen, Mustafa ^a  

^a GAZIOSMANPASA UNIVERSITY   (Turkey)

^b ERCIYES UNIVERSITY   (Turkey)

Author keywords

Diaion HP 2MG; Powdered beverage and confectionery products; Preconcentration; Spectrophotometry; Sunset yellow

Indexed keywords

ALKALI EARTH; COLUMN SYSTEMS; DETECTION LIMITS; DIAION HP 2MG; EXPERIMENTAL PARAMETERS; POWDERED BEVERAGE AND CONFECTIONERY PRODUCTS; PRE-CONCENTRATION; RELATIVE STANDARD DEVIATIONS; SAMPLE VOLUME; SOLID PHASE EXTRACTION METHOD; SOLID-PHASE EXTRACTION; SPECTROPHOTOMETRIC DETERMINATION; STANDARD ADDITION; SUNSET YELLOWS; TRACE LEVEL; UV-VIS SPECTROPHOTOMETRY;

METHANOL; PHASE SEPARATION; RESINS; SPECTROPHOTOMETRY; TRANSITION METALS;

TRACE ANALYSIS;

EID: 84861192501     PISSN: 09505423     EISSN: 13652621     Source Type: Journal    
DOI: 10.1111/j.1365-2621.2012.02966.x     Document Type: Article

References (29)

1. An, L., Deng, J., Zhou, L. et al. (2010). Simultaneous spectrophotometric determination of trace amount of malachite green and crystal violet in water after cloud point extraction using partial least squares regression. Journal of Hazardous Materials, 175, 883-888.
2. Arana, J.M.R.R. & Mazzoco, R.R. (2010). Adsorption studies of methylene blue and phenol onto black stone cherries prepared by chemical activation. Journal of Hazardous Materials, 180, 656-661.
3. Cai, Y., Jiang, G., Liu, J., He, B., (2002). Evaluation of several gas chromatographic stationary phases for the solid-phase extraction of trace amounts of copper in aqueous samples. Analytical Scinces, 18, 705-707.
4. Capitan-Vallvey, L.F., Fernandez, M.D., de Orbe, I. & Avidad, R. (1998). Simultaneous determination of the colorants tartrazine, ponceau 4R and sunset yellow FCF in foodstuffs by solid phase spectrophotometry using partial least squares multivariate calibration. Talanta, 47, 861-868.
5. Chalapathi, K., babu, L.R., Madhu, P. & Maddaiah, G.P. (2010). 2-Mercaptobenzimidazole immobilized with Amberlite xad-2 using as solid phase extractor for the determination of Fe(II), Cu(II), and Cd(II) in sewage and waste water samples by flame atomic absorption spectrometry. Advances in Applied Science Research, 1, 27-35.
6. Coelho, T.M., Vidotti, E.C., Rollemberg, M.C. et al. (2010). Photoacoustic spectroscopy as a tool for determination of food dyes: comparison with first derivative spectrophotometry. Talanta, 81, 202-207.
7. Culzoni, M.J., Schenone, A.V., Llamas, N.E. et al. (2009). Fast chromatographic method for the determination of dyes in beverages by using high performance liquid chromatography diode array detection data and second order algorithms. Journal of Chromatography A, 1216, 7063-7070.
8. Elci, L., Soylak, M., Uzun, A., Buyukpatir, E. & Dogan, M. (2000). Determination of trace impurities in some nickel compounds by flame atomic absorption spectrometry after solid phase extraction using amberlite XAD-16 resin. Fresenius Journal of Analytical Chemistry, 368, 358-361.
9. Farhadi, K., Maleki, R., Nezhad, N.M. & Samadi, N. (2010). Spectrophotometric determination of malachite green residue in water samples after preconcentration on surfactant-coated alumina. Spectroscopy Letters, 43, 101-107.
10. Ghaedi, M., Shokrollahi, A., Ekrampour, F. & Aghaei, R. (2009). Sensitized spectrophotometric determination of trace amounts of copper(II) ion using diacetyl monooxime in surfactant media. Bulletin of the Chemical Society of Ethiopia, 23, 337-345.
11. Ghaedi, M., Amirabad, S.Z., Marahel, F. et al. (2011a). Synthesis and characterization of cadmium selenide nanoparticles loaded on activated carbon and its efficient application for removal of Muroxide from aqueous solution. Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy, 83(1), 46-51.
12. Ghaedi, M., Hassanzadeh, A. & Kokhdan, S.N. (2011b). Multiwalled carbon nanotubes as adsorbents for the kinetic and equilibrium study of the removal of alizarin red S and morin. Journal of Chemical and Engineering Data, 56(5), 2511-2520.
13. Ghaedi, M., Shokrollahi, A., Tavallali, H. et al. (2011c). Activated Carbon and Multiwalled Carbon Nanotubes an Efficient Adsorbents for Kinetic and Equilibrium Study of Removal of Arsenazo (III) and Methyl Red Dyes from Waste Water. Toxicological and Environmental Chemistry, 93, 438-449.
14. Ghaedi, M., Tashkhourian, J., Pebdani, A.A., Sadeghian, B. & Ana, F.N. (2011d). Equilibrium, kinetic and thermodynamic study of removal of reactive orange 12 on platinum nanoparticle loaded on activated carbon as novel adsorbent. Korean Journal of Chemical Engineering, 28, 2255-2261.
15. Gong, W.-J., Tao, H.-W., Zi, G.-L. et al. (2010). Visible light photodegradation of dyes over mesoporous titania prepared by using chrome azurol S as template. Research Chemical Intermediates, 35, 751-760.
16. Huang, H.Y., Shih, Y.C. & Chen, Y.C. (2002). Determining eight colorants in milk beverages by capillary electrophoresis. Journal of Chromatography A, 959, 317-325.
17. Kucharska, M. & Grabka, J. (2010). A review of chromatographic methods for determination of synthetic food dyes. Talanta, 80, 1045-1051.
18. Llamas, N.E., Garrido, M., di Nezio, M.S. & Band, B.S.F. (2009). Second order advantage in the determination of amaranth, sunset yellow FCF and tartrazine by UV-vis and multivariate curve resolution-alternating least squares. Analytical Chemistry Acta, 655, 38-42.
19. Nevado, J.J.B., Flores, J.R., Villasenor, M.J. & Lerena, L. (1997). Square wave adsorptive voltammetric determination of sunset yellow. Talanta, 44, 467-474.
20. Ni, Y., Wang, Y. & Kokot, S. (2009). Simultaneous kinetic spectrophotometric analysis of five synthetic food colorants with the aid of chemometrics. Talanta, 78, 432-441.
21. Ozdemir, S., Erdogan, S. & Kilinc, E. (2010). Bacillus sp. immobilized on Amberlite XAD-4 resin as a biosorbent for solid phase extraction of thorium prior to UV-vis spectrometry determination. Microchimical Acta, 171, 275-281.
22. Pourreza, N., Rastegarzadeh, S. & Larki, A. (2011). Determination of Allura red in food samples after cloud point extraction using mixed micelles. Food and Chemical Toxicology, 126, 1465-1469.
23. Soylak, M., Akkaya, Y. & Elci, L. (2003). Application of the solid phase extraction procedure on chromatographic mini column filled with Diaion HP-20 for determination of copper, cobalt, cadmium, iron and manganese in textile products and textile wastewaters. Trace Elements and Electrolytes, 20, 16-22.
24. Sreedhar, N.Y., Prasad, P.R., Rekha, D. & Mohan, K.C. (2010). Differential pulse polarographic determination of Mn(II) and Zn(II) in biological and human hair samples after preconcentration of its complex with 2, 2'-{benzene-1, 2-diylbis (nitrilomethylylidene]} diphenol using Amberlite XAD-1180 resin. International Journal of Chemical and Analytical Science, 1, 121-126.
25. Tuzen, M., Soylak, M. & Elci, L. (2005). Multi element preconcentration of heavy metal ions by solid phase extraction on Chromosorb 108. Analytical Chimica Acta, 548, 101-108.
26. Tuzen, M., Melek, M. & Soylak, M. (2008). Solid-phase extraction of copper, iron and zinc ions on Bacillus thuringiensis israelensis loaded on Dowex optipore V-493. Journal of Hazardous Material, 159, 335-341.
27. Tuzen, M., Soylak, M., Citak, D., Ferreira, H.S., Korn, M.G.A. & Bezerra, M.A. (2009). A preconcentration system for determination of copper and nickel in water and food samples employing flame atomic absorption spectrometry. Journal of Hazardous Materials, 162, 1041-1045.
28. Vidotti, E.C., Costa, W.F. & Oliveira, C.C. (2006). Development of a green chromatographic method for determination of colorants in food samples. Talanta, 68, 516-521.
29. Yoshioka, N. & Ichihashi, K. (2008). Determination of 40 synthetic food colors in drinks and candies by high-performance liquid chromatography using a short column with photodiode array detection. Talanta, 74, 1408-1413.