Effect of ionomer on barrier and mechanical properties of PET/Organoclay nanocomposites prepared by melt compounding

International Polymer Processing

Volumn 26, Issue 4, 2011, Pages 444-455

  Xu, X F ^a   Ghanbari, A ^a   Leelapornpisit, W ^a   Heuzey, M C ^a   Carreau, P ^a  

^a DEPARTMENT OF CHEMICAL ENGINEERING   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

CLAY PARTICLES; COLD CRYSTALLIZATION TEMPERATURE; COMPLEX VISCOSITY; EXTRUDED FILMS; HETEROGENEOUS NUCLEATION; INTERNAL MIXERS; LOW FREQUENCY; MASS RATIO; MELT CRYSTALLIZATION; MELT-COMPOUNDING; NANO CLAYS; NANOCLAY PARTICLES; OXYGEN PERMEABILITY; RHEOMETRY; SINGLE SCREW EXTRUSION; TWIN SCREW EXTRUSION;

CLAY MINERALS; DEGRADATION; ELASTIC MODULI; EXTRUSION; FILM PREPARATION; NANOCOMPOSITES; ORGANOCLAY; POLYETHYLENE TEREPHTHALATES; TENSILE TESTING;

NANOCOMPOSITE FILMS;

EID: 84860992224     PISSN: 0930777X     EISSN: None     Source Type: Journal    
DOI: 10.3139/217.2477     Document Type: Article

References (38)

1. Ammala, A., et al.: "Poly(ethylene terephthalate) Clay Nanocomposites: Improved Dispersion Based on a Aqueous Ionomer", Compos. Sci. Technol., 68, 1328-1337 (2008), DOI:10.1016/j.compscitech.2007.12.012
2. Barber, G. D., et al., "Poly(ethylene terephthalate) Ionomer Based Clay Nanocomposites Produced via Melt Extrusion", Polymer., 46, 6706-6714 (2005), DOI:10.1016/j.polymer.2005.05.024
3. Basu, S. K., Tewari, A., "Transmission Electron Microscopy Based Direct Mathematical Quantifiers for Dispersion in Nanocomposites", Appl. Phys. Lett., 91, 053105 (2007), DOI:10.1063/1.2760182
4. Boykin, T. L., Moore, R. B., "The Role of Specific Interactions and Transreactions on the Compatibility of Polyester Ionomers with Poly(ethylene terephthalate) and Nylon 6,6", Polym. Eng. Sci., 38, 1658-1665 (1998), DOI:10.1002/pen.10336
5. Chisholm, B. J., et al., "Nanocomposites Derived from Sulfonated Poly(butylene terephthalate)", Macromolecules, 35, 5508-5516 (2002), DOI:10.1021/ma012224n
6. Cho, J. W., Paul, D. R., "Nylon 6 Nanocomposites by Melt Compounding", Polymer, 42, 1083-1094 (2001), DOI:10.1016/S0032-3861(00)00380-3
7. Dennis, H. R., et al., "Effect of Melt Processing Conditions on the Extent of Exfoliation in Organoclay-based Nanocomposites", Polymer, 42, 9513-9522 (2001), DOI:10.1016/S0032-3861(01)00473-6
8. Eckel, D. F., et al., "Assessing Organo-clay Dispersion in Polymer Nanocomposites", J. Appl. Polym. Sci., 93, 1110-1117 (2004), DOI:10.1002/app.20566
9. Fornes, T. D., et al., "Nylon 6 Nanocomposites: The Effect of Matrix Molecular Weight", Polymer, 42, 09929-09940 (2001), DOI:10.1016/S0032-3861(01)00552-3
10. Fornes, T. D., et al., "Polymer Matrix Degradation and Color Formation in Melt Processed Nylon 6/Clay Nanocomposites", Polymer, 44, 7545-7556 (2003), DOI:10.1016/j.polymer.2003.09.034
11. Fornes, T. D., et al., "Effect of Sodium Montmorillonite Source on Nylon 6/Clay Nanocomposites", Polymer, 45, 2321-2331 (2004), DOI:10.1016/j.polymer.2004.01.061
12. Gashemi, H., et al., "Effect of Processing Conditions on Properties of PET/Clay Nanocomposite Films", Int. Polym. Proc., 25, 219-228 (2011), DOI:10.3139/217.2446
13. Ge, C. H., et al., "Isothermal Crystallization Kinetics and Melting Behavior of Poly(ethylene terephthalate)/Barite Nanocomposites", J. Polym. Sci., Part B: Polym. Phys., 47, 655-668 (2009), DOI:10.1002/polb.21669
14. Gilman, J. W., "Flammability and Thermal Stability Studies of Polymer Layered-silicate (Clay) Nanocomposites", Appl. Clay Sci., 15, 31-49 (1999), DOI:10.1016/S0169-1317(99)00019-8
15. Gilman, J. W., et al., "Flammability Properties of Polymer-Layered-Silicate Nanocomposites. Polypropylene and Polystyrene Nanocomposites", Chem. Mater., 12, 1866-1873 (2000), DOI:10.1021/cm0001760
16. Gurmendi, U., et al., "Structure and Properties of a New Polymer Nanocomposite Based on a Poly(hydroxy ether of bisphenol A) Matrix", Compos. Sci. Technol., 66, 1221-1228 (2006), DOI:10.1016/j.compscitech.2005.10.033
17. Imai, Y., et al., "High-modulus Poly(ethylene terephthalate)/Expandable Fluorine Mica Nanocomposites with a Novel Reactive Compatibilizer", Chem. Mater., 14, 477-479 (2002), DOI:10.1021/cm010408a
18. Krikorian, V., Pochan, D. J., "Poly(l-Lactic Acid)/Layered Silicate Nanocomposite: Fabrication, Characterization, and Properties", Chem. Mater., 15, 4317-4324 (2003), DOI:10.1021/cm034369+
19. Lee, S., et al., "Exfoliation of Layered Silicate Facilitated by Ringopening Reaction of Cyclic Oligomers in PET Clay Nanocomposites", Polymer, 46, 2201-2210 (2005), DOI:10.1016/j.polymer.2005.01.006
20. Luo, Z. P., Koo, J. H., "Quantification of the Layer Dispersion Degree in Polymer Layered Silicate Nanocomposites by Transmission Electron Microscopy" Polymer, 49, 1841-1852 (2008), DOI:10.1016/j.polymer.2008.02.028
21. Messersmith, P. B., Giannelis, E. P., "Synthesis and Barrier Properties of Poly(e-caprolactone)-layered Silicate Nanocomposites", J. Polym. Sci., Part A: Polym. Chem., 33, 1047-1057 (1995), DOI:10.1002/pola.1995.080330707
22. Nielsen, L. E., "Models for the Permeability of Filled Polymers", J. Macromol. Sc. Chem., 5, 929-942(1967), DOI:10.1080/10601326708053745
23. Phang, I. Y., et al. "Crystallization and Melting Behavior of Polyester/Clay Nanocomposites", Polym. Int., 53, 1282-1289 (2004), DOI:10.1002/pi.1513
24. Pluta, M., "Melt Compounding of Polylactide/Organoclay: Structure and Properties of Nanocomposites", J. Polym. Sci., Part B: Polym. Phys, 44, 3392-3405 (2006), DOI:10.1002/polb.20957
25. Qiu, G., et al., "Dual Melting Endotherms in the Thermal Analysis of Poly(ethylene terephthalate)", J. Appl. Polym. Sci., 69, 729-742 (1998), DOI:10.1002/(SICI)1097-4628(19980725)69:4<729::AIDAPP11>3.0.CO;2-K
26. Ray, S. S., Okamoto, M., "Polymer-layered Silicate Nanocomposite: A Review from Preparation to Processing", Prog. Polym. Sci., 28, 1539-641 (2003), DOI:10.1016/j.progpolymsci.2003.08.002
27. st Century Materials World", Prog. Mater. Sci., 50, 962-1079 (2005), DOI:10.1016/j.pmatsci.2005.05.002
28. Sanchez-Solis, A., et al., "Production of Nanocomposites of PET-montmorillonite Clay by an Extrusion Process", Macromol. Symp., 192, 281-292 (2003), DOI:10.1002/masy.200390038
29. Saujanya, C., et al., "Structure and Thermal Properties of Compatibilized PET/Expandable Fluorine Mica Nanocomposites", Polym. Bull., 49, 69-76 (2002), DOI:10.1007/s00289-002-0072-5
30. Saujanya, C., et al., "Structure Development and Isothermal Crystallization Behaviour of Compatibilized PET/Expandable Fluorine Mica Hybrid Nanocomposite", Polym. Bull., 51, 85-92 (2003), DOI:10.1007/s00289-003-0197-1
31. VanderHart, D. L., et al., "NMR Measurements Related to Clay-dispersion Quality and Organic-Modifier Stability in Nylon-6/Clay Nanocomposites", Macromolecules, 34, 3819-3822 (2001), DOI:10.1021/ma002089z
32. Vermogen, A., et al., "Evaluation of the Structure and Dispersion in Polymer-layered Silicate Nanocomposites", Macromolecules, 38, 9661-9669 (2005), DOI:10.1021/ma051249+
33. Vidotti, S. E., et al., "Preparation of Poly(ethylene terephthalate)/Organoclay Nanocomposites Using a Polyester Ionomer as a Compatibilizer", J. Polym. Sci., Part B: Polym. Phys., 45, 3084-3091 (2007), DOI:10.1002/polb.21311
34. Wagener, R., Reisinger, T. J. G., "A Rheological Method to Compare the Degree of Exfoliation of Nanocomposites", Polymer, 44, 7513-7518 (2003), DOI:10.1016/j.polymer.2003.01.001
35. Xie, S. B., et al., "Quantitative Characterization of Clay Dispersion in Polypropylene-clay Nanocomposites by Combined Transmission Electron Microscopy and Optical Microscopy", Materials Letters, 64, 185-188 (2010), DOI:10.1016/j.matlet.2009.10.042
36. Zhao, J., et al., "Rheological Characterization of Polystyrene-Clay Nanocomposites to Compare the Degree of Exfoliation and Dispersion" Polymer, 46, 8641-8660 (2005), DOI:10.1016/j.polymer.2005.04.038
37. Zhu, J., et al., "Fire Properties of Polystyrene-Clay Nanocomposites", Chem. Mater., 13, 3774-3780 (2001), DOI:10.1021/cm000984r
38. Zhu, J., et al., "Studies on the Mechanism by which the Formation of Nanocomposites Enhances Thermal Stability", Chem. Mater., 13, 4649-4654 (2001), DOI:10.1021/cm010451y