Torque transmissibility assessment for automotive dry-clutch engagement

IEEE/ASME Transactions on Mechatronics

Volumn 16, Issue 3, 2011, Pages 564-573

  Vasca, Francesco ^a   Iannelli, Luigi ^a   Senatore, Adolfo ^b   Reale, Gabriella ^a  

^a UNIVERSITY OF SANNIO   (Italy)

^b UNIVERSITY OF SALERNO   (Italy)

Author keywords

Automated manual transmission (AMT); clutch engagement; cushion spring; dry clutch; friction; transmission control

Indexed keywords

AUTOMATED MANUAL TRANSMISSION; CHARACTERISTIC PARAMETER; COSIMULATION; CUSHION SPRING; DRIVELINES; DRY CLUTCHES; EXPERIMENTAL PROCEDURE; KEY ELEMENTS; NEW MODEL; SPRING COMPRESSION; SPRING LOADS; TRANSMISSION CONTROL;

FRICTION; SPEED CONTROL; TORQUE; TRIBOLOGY;

CLUTCHES;

EID: 84860692795     PISSN: 10834435     EISSN: None     Source Type: Journal    
DOI: 10.1109/TMECH.2010.2047509     Document Type: Article

References (30)

1. J. Deur, J. Petríc, J. Asgari, and D. Hrovat, "Recent advances in controloriented modeling of automotive power train dynamics," IEEE/ASME Trans. Mechatronics, vol. 11, no. 5, pp. 513-523, Oct. 2006. (Pubitemid 44641492)
2. V. Sankaranayanan, M. E. Emekli, B. A. Gilvenc, L. Guvenc, E. S. Ozturk, E. S. Ersolmaz, I. E. Eyol, and M. Sinal, "Semiactive suspension control of a light commercial vehicle," IEEE/ASME Trans.Mechatronics, vol. 13, no. 5, pp. 598-604, Oct. 2008.
3. S. M. Savaresi, M. Tanelli, F. L. Taroni, F. Previdi, and S. Bittanti, "Analysis and design of an automatic motion inverter," IEEE/ASME Trans. Mechatronics, vol. 11, no. 3, pp. 346-357, Jun. 2006.
4. W. Lhomme, R. Trigui, and A. Bouscayrol, "Switched causal modeling of transmission with clutch in hybrid electric vehicles," IEEE Trans. Veh. Technol., vol. 57, no. 4, pp. 2081-2088, Jul. 2008.
5. G. Lucente, M. Montanari, and C. Rossi, "Modelling of an automated manual transmission system," Mechatronics, vol. 17, pp. 73-91, 2007. (Pubitemid 46199157)
6. A. Senatore, "Advances in the automotive systems: An overview of dualclutch transmissions," Recent Patents Mech. Eng., vol. 2, no. 2, pp. 93-101, 2009.
7. R. Zanasi, A. Visconti, G. Sandoni, and R. Morselli, "Dynamic modeling and control of a car transmission system," in Proc. IEEE/ASME Int. Conf. Adv. Intell. Mechatronics, Como, Italy, 2001, pp. 416-421. (Pubitemid 32797795)
8. L. Glielmo and F. Vasca, "Optimal control of dry clutch engagement," SAE 2000 World Congr., Detroit, MI, 2000, SAE Technical Paper 2000-01-0837.
9. A. C. Van Der Heijden, A. F. A. Serrarens, M. K. Camlibel, and H. Nijmeijer, "Hybrid optimal control of dry clutch engagement," Int. J. Control, vol. 80, no. 11, pp. 1717-1728, 2007. (Pubitemid 47551884)
10. P. Dolcini, C. Canudas deWit, and H. Bechart, "Lurch avoidance strategy and its implementation inAMTvehicles," Mechatronics, vol. 18, pp. 289-300, 2008.
11. A. Bemporad, F. Borrelli, L. Glielmo, and F. Vasca, "Hybrid control of dry clutch engagement," presented at the Eur. Control Conf., Porto, Portugal, 2001.
12. R. Amari, M. Alamir, and P. Tona, "Unified MPC strategy for idle speed control, vehicle start-up and gearing applied to an automated manual transmission," presented at the 17th IFAC World Congr., Seoul, South Korea, 2008.
13. L. Glielmo, L. Iannelli, V. Vacca, and F. Vasca, "Gearshift control for automated manual transmissions," IEEE/ASME Trans. Mechatronics, vol. 11, no. 1, pp. 17-26, Feb. 2006. (Pubitemid 43280481)
14. L. Glielmo, P. O. Gutman, L. Iannelli, and F. Vasca, "Robust smooth engagement of an automotive dry clutch," in Proc. 4th IFAC Symp. Mechatronics Syst., Heidelberg, Germany, 2006, pp. 632-637.
15. G. J. L. Naus, M. Beenakkers, R. Huisman, M. J. G. van de Molengraft, and M. Steinbuch, "Robust control to suppress clutch judder," presented at the 8th Int. Symp. Adv. Veh. Control, Kobe, Japan, 2008.
16. Z. Sun and K. Hebbale, "Challenges and opportunities in automotive transmission control," presented at the 2005 Amer.ControlConf., Portland, OR, 2005.
17. M. Kulkarni, T. Shim, and Y. Zhang, "Shift dynamics and control of dual-clutch transmissions," Mech. Mach. Theory, vol. 42, pp. 168-182, 2007. (Pubitemid 44880416)
18. R. Gasper,R.Beck, P.Drews, and D. Abel, "Feedfoward control of parallel hybrid launch clutch," in Proc. Eur. Control Conf., Budapest, Hungary, 2009, pp. 4265-4270.
19. L. Guzzella and A. Sciarretta, Vehicle Propulsion Systems, Introduction to Modeling and Optimization. Berlin, Germany: Springer-Verlag, 2005.
20. R. Amari, P. Tona, and M. Alamir, "Phenomenological model for torque transmissbility during dry clutch engagement," in Proc. IEEEMulti-Conf. Syst. Control, Saint Petersburg, Russia, 2009, pp. 680-686.
21. S. Mauro, G. Mattiazzo, M. Velardocchia, G. Serra, F. Amisano, and G. Ercole, "The influence of the push-plate mechanical characteristic on torque transmissibility in diaphragm spring clutches," presented at the 2002 AIMETA Int. Tribol. Conf., Vietri sul Mare, Salerno, Italy, 2002.
22. G. La Rosa, M. Messina, and A. Risitano, "Stiffness of variable thickness belleville springs," J. Mech. Design, vol. 123, pp. 294-299, 2001. (Pubitemid 33716211)
23. S. Sfarni, E. Bellenger, J. Fortin, and M. Malley, "Finite element analysis of automotive cushion discs," Thin-Walled Struct., vol. 47, pp. 474-483, 2009.
24. C. Duan and R. Singh, "Dynamics of a 3DOF torsional system with a dry friction controlled path," J. Sound Vibration, vol. 289, pp. 657-688, 2006.
25. H. Olsson, K. J. Astrom,C.Canudas deWit, M. Gafvert, and P. Lischinsky, "Frictionmodels and friction compensation," Eur. J. Control, vol. 4, no. 3, pp. 176-195, 1998.
26. S. Andersson, A. Soderberg, and S.Bjorklund, "Frictionmodels for sliding dry, boundary and mixed lubricated contacts," Tribol. Int., vol. 11, no. 40, pp. 580-587, 2007. (Pubitemid 44855258)
27. K. Poser, K. H. Zum Gahr, and J. Schneider, "Development of Al2O3 based ceramics for dry friction systems," Wear, vol. 259, pp. 529-538, 2005. (Pubitemid 41057009)
28. F. Garofalo, L. Glielmo, L. Iannelli, and F. Vasca, "Smooth engagement for automotive dry clutch," in Proc. 40th IEEE Conf. Decis. Control, Orlando, FL, 2001, pp. 529-534. (Pubitemid 34138972)
29. B. Bhushan, Ed., Modern Tribology Handbook Vol.1-Principles of Tribology. Boca Raton, FL: CRC Press, 2001.
30. F. Vasca, L. Iannelli, A. Senatore, and M. Taglialatela Scafati, "Modeling torque transmissibility for automotive dry clutch engagement," in Proc. Amer. Control Conf., Seattle, WA, 2008, pp. 306-311.