Recent advances in control-oriented modeling of automotive power train dynamics

IEEE/ASME Transactions on Mechatronics

Volumn 11, Issue 5, 2006, Pages 513-523

  Deur, Joško ^a   Petríc, Joško ^a   Asgari, Jahan ^b   Hrovat, Davor ^b  

^a UNIVERSITY OF ZAGREB   (Croatia)

^b FORD MOTOR COMPANY   (United States)

Author keywords

Control; Dynamics; Modeling; Power train; Road vehicles

Indexed keywords

COMPUTER SIMULATION; CONTROL SYSTEM SYNTHESIS; DYNAMICS; MACHINE COMPONENTS; MATHEMATICAL MODELS;

POWER TRAIN COMPONENT; POWER TRAIN SYSTEM;

AUTOMATIC TRAIN CONTROL;

EID: 33750408723     PISSN: 10834435     EISSN: None     Source Type: Journal    
DOI: 10.1109/TMECH.2006.882980     Document Type: Article

References (49)

1. D. Hrovat and W. E. Tobler, "Bond graph modeling of automotive power trains," J. Franklin Inst., vol. 328, pp. 623-662, 1991.
2. D. Hrovat, J. Asgari, and M. G. Fodor, "Automotive mechatronics systems," in Mechatronics Systems, Techniques and Applications, C. T. Leondes, Ed. New York: Gordon and Breach, 2000, pp. 1-98.
3. D. Cho and K. J. Hedrick, "Automotive powertrain modeling for control," Trans. ASME, J. Dyn. Syst. Meas. Control, vol. 111, pp. 568-576, 1989.
4. H. Heisler, Advanced Vehicle Technology, 2nd ed. Warrendale, PA: SAE, 2002.
5. D. Pavković, J. Deur,M. Jansz, and N. Perić. (2003). Experimental identification of electronic throttle body. Presented at the 10th Eur. Conf. Power Electron. Appl., Toulouse, France [CD-ROM].
6. J. Deur, D. Pavković, N. Perić, M. Jansz, and D. Hrovat, "An electronic throttle control strategy including compensation of friction and limp-home effects," IEEE Trans. Ind. Appl., vol. 40, no. 3, pp. 821-834, May-Jun. 2004.
7. J. Deur, D. Pavković, N. Perić, and M. Jansz. (2002). Analysis and optimization of an electronic throttle for linear operating modes. Presented at the 10th Int. Power Electron. Motion Control Conf., Dubrovnik-Cavtat, Croatia [CD-ROM].
8. D. Pavković, J. Deur, M. Jansz, and N. Perić, "Adaptive control of automotive electronic throttle," Control Eng. Pract., vol. 14, pp. 121-136, 2006.
9. J. Deur, V. Ivanović, D. Pavković, and M. Jansz, "Identification and speed control of SI engine for idle operating mode," SAE Paper 2004-01-0898, 2004.
10. D. Pavković, J. Deur, V. Ivanović, and D. Hrovat, "SI engine load torque estimator based on adaptive Kalman filter and its application to idle speed control," SAE Paper 2005-01-0036, 2005.
11. B. K. Powell, "A dynamic model for automotive engine control analysis," in Proc. 18th IEEE Conf. Decision Control, 1979, pp. 120-126.
12. E. Hendricks, A. Chavalier, M. Jensen, S. C. Sorenson, D. Trumpy, and J. Asik, "Modeling of the intake manifold filling dynamics," SAE Paper 960037, 1996.
13. M. Fons, M. Muller, A. Chevalier, C. Vigild, E. Hendricks, and S. C. Sorenson, "Mean value engine modeling of an SI engine with EGR," SAE Paper 1999-01-0909, 1999.
14. M. Jankovic and S. W. Magner, "Cylinder air-charge estimation for advanced intake valve operation in variable cam timing engines," JSAE Rev., vol. 22, no. 4, pp. 445-452, Oct. 2001.
15. A. Chevalier, C. Vigild, and E. Hendricks, "Predicting the port air mass flow of SI engines in air/fuel ratio control applications," SAE Paper 2000-01-0260, 2000.
16. D. Hrovat, "Mean value engine models," private communication, 1989-1990.
17. J. Deur, D. Hrovat, J. Petrić, and Ž. Šitum. (2003). A control-oriented polytropic model of SI engine intake manifold. Presented at the ASME Int. Mech. Eng. Congr. Expo., Washington, DC, vol 2 [CD-ROM].
18. J. Petrić, J. Deur, D. Pavković, I. Mahalec, and Z. Herold, "Experimental setup for SI-engine modeling and control research," Strojarstvo, vol. 46, no. 1-3, pp. 39-50, 2004.
19. J. Deur, D. Hrovat, and J. Asgari, "Analysis of mean value engine model with emphasis on intake manifold thermal effects," in Proc. IEEE Int. Conf. Control Appl., Istanbul, Turkey, 2003, vol. 1, pp. 161-166.
20. J. Deur, S. W. Magner, M. Jankovic, and D. Hrovat. (2004). Influence of intake manifold heat transfer effects on accuracy of SI engine air charge prediction, Presented at the ASME Int. Mech. Eng. Congr. Expo., Anaheim, CA, vol. 2 [CD-ROM].
21. G. G. Lucas and A. Rayner, "Torque converter design calculations," Automob. Eng., pp. 56-60, 1970.
22. A. Kotwicki, "Dynamic models for torque converter equipped vehicles," SAE Paper 820393, 1982.
23. T. Ishihara and R. Emori, "Torque converter as a vibration damper and its transient characteristics," SAE Paper 660368, 1966.
24. D. Hrovat and W. E. Tobler, "Bond graph modeling and computer simulation of automotive torque converter," J. Franklin Inst., vol. 319, no. 1-2, pp. 93-114, 1985.
25. D. C. Karnopp, D. L. Margolis, and R. Rosenberg, System Dynamics - A Unified Approach. New York: Wiley, 1990.
26. J. Deur, D. Hrovat, and J. Asgari. (2002). Analysis of torque converter dynamics. Presented at the ASME Int. Mech. Eng. Congr. Expo., New Orleans, LA, vol. 2 [CD-ROM].
27. J. Deur and N. Perić, "Analysis of speed control system for electrical drives with elastic transmission," in Proc. IEEE Int. Symp. Ind. Electron., Bled, Slovenia, Jul.1999, vol. 3, pp. 624-630.
28. J. Deur, J. Petrić, J. Asgari, and D. Hrovat, "Modeling of wet clutch engagement including a thorough experimental validation," SAE Paper 2005-01-0877, 2005.
29. B. Jacobson, "Engagement of oil immersed multi-disc clutches," in Proc. ASME Int. Power Transmiss. Gearing Conf., 1992, vol. 43-2, pp. 567-574.
30. S. Natsumeda and T. Miyoshi, "Numerical simulation of engagement of paper based wet clutch facing," Trans. ASME, J. Tribol., vol. 116, pp. 232-237, 1994.
31. E. J. Berger, F. Sadeghi, and C. M. Krousgrill, "Analytical and numerical modeling of engagement of rough, permeable, grooved wet clutches," Trans. ASME, J. Tribol., vol. 119, pp. 143-148, 1997.
32. J. Deur, J. Asgari, D. Hrovat, and P. Kovač, "Modeling and analysis of automatic transmission engagement dynamics - Linear case," Trans. ASME., J. Dyn. Syst. Meas. Control, vol. 128, pp. 263-277, Jun. 2006.
33. J. Deur, J. Asgari, and D. Hrovat, "Modeling and analysis of automatic transmission engagement dynamics - Nonlinear case including validation," Trans. ASME, J. Dyn. Syst. Meas. Control, vol. 128, pp. 251-262, Jun. 2006.
34. J. Deur, J. Asgari, and D. Hrovat, (2003). Modeling of an automotive planetary gear set based on Karnopp model for clutch friction. Presented at the ASME Int. Mech. Eng. Congr. Expo., Washington, DC, vol. 2 [CD-ROM].
35. H. B. Pacejka and R. S. Sharp, "Shear force development by pneumatic tyres in steady state conditions: A review of modelling aspects," Vehicle Syst. Dyn., vol. 20, pp. 121-176, 1991.
36. E. Bakker, L. Nyborg, and H. B. Pacejka, "Tyre modelling for use in vehicle dynamics studies," SAE Paper 870421, 1987.
37. A. van Zanten, W. D. Ruf, and A. Lutz, "Measurement and simulation of transient tire forces," SAE Paper 890640, 1989.
38. J. E. Bernard and C. L. Clover, "Tire modeling for low-speed and high-speed calculations," SAE Paper 950311, 1995.
39. C. Canudas de Wit and P. Tsiotras, "Dynamic tire friction models for vehicle traction control," in Proc. 38th IEEE Conf. Decision Control, Phoenix, AZ, 1999, pp. 3746-3751.
40. J. Deur, "Modeling and analysis of longitudinal tire dynamics based on the LuGre friction model," in Proc. 3rd IFACWorkshop Advances Automotive Control, Karlsruhe, Germany, 2001, pp. 101-106.
41. J. Deur, J. Asgari, and D. Hrovat. (2001). A dynamic tire friction model for combined longitudinal and lateral motion. Presented at the ASME Int. Mech. Eng. Congr. Expo., New York, NY, vol. 2 [CD-ROM].
42. J. Deur. (2002). A brush-type dynamic tire friction model for non-uniform normal pressure distribution. Presented at the 15th IFAC World Congr., Barcelona, Spain [CD-ROM].
43. J. Deur, J. Asgari, and D. Hrovat, "A 3D brush-type dynamic tire friction model," Vehicle Syst. Dyn., vol. 42, no. 3, pp. 133-173, 2004.
44. J. Deur, V. Ivanović, M. Troulis, C. Miano, D. Hrovat, and J. Asgari, "Extensions of LuGre tire friction model related to variable slip speed along contact patch length," in Proc. 3rd IAVSD Int. Tyre Colloq. Tyre Models Vehicle Dyn. Anal., Vienna, Austria, 2004, p. 32.
45. J. Deur, V. Ivanović, M. Troulis, C. Miano, D. Hrovat, and J. Asgari, "Extensions of LuGre tire friction model related to variable slip speed along contact patch length," Vehicle Syst. Dyn., vol. 43, pp. 508-524, 2005.
46. J. Deur, V. Ivanović, D. Pavković, D. Hrovat, J. Asgari, M. Troulis, and C. Miano, "Experimental analysis and modeling of longitudinal tire friction dynamics for abrupt transients," in Proc. 3rd IAVSD Int. Tyre Colloq. Tyre Models Vehicle Dyn. Anal., Vienna, Austria, 2004, p. 33.
47. J. Deur, V. Ivanović, D. Pavković, D. Hrovat, J. Asgari, M. Troulis, and C. Miano, "Experimental analysis and modeling of longitudinal tire friction dynamics for abrupt transients," Vehicle Syst. Dyn., vol. 43, pp. 525-539, 2005.
48. V. Ivanović, J. Deur, M. Kostelac, Z. Herold, M. Troulis, C. Miano, D. Hrovat, J. Asgari, D. Higgins, J. Blackford, and V. Koutsos, "Experimental identification of dynamic tire friction potential on ice surfaces," presented at the XIX IAVSD Symp., Milan, Italy, 2005.
49. V. Ivanović, J. Deur, J. Asgari, D. Hrovat, and O. Hofmann, "Modeling of dynamic tire friction potential on ice surfaces," in Proc. 2006 ASME Int. Mech. Eng. Congr. Expo., Chicago, IL, to be published.