Reverse freeze casting: A new method for fabricating highly porous titanium scaffolds with aligned large pores

Acta Biomaterialia

Volumn 8, Issue 6, 2012, Pages 2401-2410

  Yook, Se Won ^a   Jung, Hyun Do ^a   Park, Chang Hoon ^a   Shin, Kwan Ha ^b   Koh, Young Hag ^b   Estrin, Yuri ^a,c   Kim, Hyoun Ee ^a  

^a Seoul National University   (South Korea)

^b Korea University   (South Korea)

^c MONASH UNIVERSITY   (Australia)

Author keywords

Aligned pores; Freeze casting; Mechanical properties; Scaffold; Titanium (Ti)

Indexed keywords

FABRICATION; POROSITY; POWDERS; SCAFFOLDS (BIOLOGY); SINTERING;

ALIGNED PORE; FREEZE CASTING; FREEZE CASTING METHODS; LARGE PORES; POROUS TITANIA; PRE-ALIGNED; TITANIA; TITANIUM POWDERS; TITANIUM SCAFFOLDS;

SCAFFOLDS;

CAMPHENE; TISSUE SCAFFOLD; TITANIUM;

ARTICLE; COMPRESSIVE STRENGTH; FREEZE DRYING; MATERIALS TESTING; POROSITY; PRIORITY JOURNAL; TEMPERATURE; YOUNG MODULUS;

EID: 84860531220     PISSN: 17427061     EISSN: 18787568     Source Type: Journal    
DOI: 10.1016/j.actbio.2012.03.020     Document Type: Article

References (68)

1. G. Ryan, A. Pandit, and D.P. Apatsidis Fabrication methods of porous metals for use in orthopaedic applications Biomaterials 27 2006 2651 2670
2. T. Zhai, X.P. Jiang, X.Y. Wang, J.X. Lia, D.Y. Li, and C.S. Man Enhancement of fatigue and corrosion properties of pure Ti by sandblasting Mater Sci Eng A: Struct 429 2006 30 35
3. J. Chen, G. Craig, E. Farley, and A. Sanjurjo Titanium-based coatings on steel - dip coating and plasma spray Surf Coat Technol 49 1991 116 120
4. R.H. Emerson, S.B. Sanders, W.C. Head, and L. Higgins Effect of circumferential plasma-spray porous coating on the rate of femoral osteolysis after total hip arthroplasty J Bone Joint Surg Am 81A 1999 1291 1298
5. H.F. Hildebrand, Y.M. Zhang, P. Bataillon-Linez, P. Huang, Y.M. Zhao, and Y. Han Surface analyses of micro-arc oxidized and hydrothermally treated titanium and effect on osteoblast behavior J Biomed Mater Res A 68A 2004 383 391
6. L.H. Li, Y.M. Kong, H.W. Kim, Y.W. Kim, H.E. Kim, and S.J. Heo Improved biological performance of Ti implants due to surface modification by micro-arc oxidation Biomaterials 25 2004 2867 2875
7. M. Long, and H.J. Rack Titanium alloys in total joint replacement - a materials science perspective Biomaterials 19 1998 1621 1639
8. D.W. Hutmacher Scaffolds in tissue engineering bone and cartilage Biomaterials 21 2000 2529 2543
9. J.P. St-Pierre, M. Gauthier, L.P. Lefebvre, and M. Tabrizian Three-dimensional growth of differentiating MC3T3-E1 pre-osteoblasts on porous titanium scaffolds Biomaterials 26 2005 7319 7328
10. L.D. Zardiackas, D.E. Parsell, L.D. Dillon, D.W. Mitchell, L.A. Nunnery, and R. Poggie Structure, metallurgy, and mechanical properties of a porous tantalum foam J Biomed Mater Res 58 2001 180 187
11. J.D. Bobyn, G.J. Stackpool, S.A. Hacking, M. Tanzer, and J.J. Krygier Characteristics of bone ingrowth and interface mechanics of a new porous tantalum biomaterial J Bone Joint Surg Br 81B 1999 907 914
12. J.D. Bobyn, R.M. Pilliar, H.U. Cameron, and G.C. Weatherly The optimum pore size for the fixation of porous-surfaced metal implants by the ingrowth of bone Clin Orthop Relat Res 1980 263 270
13. V. Karageorgiou, and D. Kaplan Porosity of 3D biomaterial scaffolds and osteogenesis Biomaterials 26 2005 5474 5491
14. S.F. Hulbert Potential of ceramic materials as permanently implantable percutaneous devices Fed Proc 30 1971 A705
15. K. Rezwan, Q.Z. Chen, J.J. Blaker, and A.R. Boccaccini Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering Biomaterials 27 2006 3413 3431
16. S. Deville Freeze-casting of porous ceramics: a review of current achievements and issues Adv Eng Mater 10 2008 155 169
17. H.R. Ramay, and M. Zhang Biphasic calcium phosphate nanocomposite porous scaffolds for load-bearing bone tissue engineering Biomaterials 25 2004 5171 5180
18. F. Tancret, J.T. Zhang, and J.M. Bouler Fabrication and mechanical properties of calcium phosphate cements (CPC) for bone substitution Mater Sci Eng C: Mater 31 2011 740 747
19. L.P. Lefebvre, E. Baril, and M.N. Bureau Effect of the oxygen content in solution on the static and cyclic deformation of titanium foams J Mater Sci: Mater M 20 2009 2223 2233
20. Y.J. Chen, B. Feng, Y.P. Zhu, J. Weng, J.X. Wang, and X. Lu Fabrication of porous titanium implants with biomechanical compatibility Mater Lett 63 2009 2659 2661
21. T.F. Hong, Z.X. Guo, and R. Yang Fabrication of porous titanium scaffold materials by a fugitive filler method J Mater Sci: Mater M 19 2008 3489 3495
22. S. Deville, E. Saiz, R.K. Nalla, and A.P. Tomsia Freezing as a path to build complex composites Science 311 2006 515 518
23. T.Y. Yang, W.Y. Kim, S.Y. Yoon, and H.C. Park Macroporous silicate ceramics prepared by freeze casting combined with polymer sponge method J Phys Chem Solids 71 2010 436 439
24. I.H. Oh, N. Nomura, N. Masahashi, and S. Hanada Mechanical properties of porous titanium compacts prepared by powder sintering Scripta Mater 49 2003 1197 1202
25. L.J. Chen, T. Li, Y.M. Li, H. He, and Y.H. Hu Porous titanium implants fabricated by metal injection molding T Nonferr Metal Soc 19 2009 1174 1179
26. C.E. Wen, Y. Yamada, K. Shimojima, Y. Chino, T. Asahina, and M. Mabuchi Processing and mechanical properties of autogenous titanium implant materials J Mater Sci: Mater M 13 2002 397 401
27. 2 slurries Powder Technol 178 2007 109 113
28. J.A. Jansen, R.P. del Real, J.G.C. Wolke, and M. Vallet-Regi A new method to produce macropores in calcium phosphate cements Biomaterials 23 2002 3673 3680
29. M.P. Ginebra, A. Almirall, G. Larrecq, J.A. Delgado, S. Martinez, and J.A. Planell Fabrication of low temperature macroporous hydroxyapatite scaffolds by foaming and hydrolysis of an alpha-TCP paste Biomaterials 25 2004 3671 3680
30. X. Li, C.T. Wang, W.G. Zhang, and Y.C. Li Fabrication and compressive properties of Ti6Al4V implant with honeycomb-like structure for biomedical applications Rapid Prototyping J 16 2010 44 49
31. A.S. Pandit, G.E. Ryan, and D.P. Apatsidis Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique Biomaterials 29 2008 3625 3635
32. H. Zhang, and A.I. Cooper Aligned porous structures by directional freezing Adv Mater 19 2007 1529 1533
33. Y. Chino, and D.C. Dunand Directionally freeze-cast titanium foam with aligned, elongated pores Acta Mater 56 2008 105 113
34. S. Deville, E. Saiz, and A.P. Tomsia Freeze casting of hydroxyapatite scaffolds for bone tissue engineering Biomaterials 27 2006 5480 5489
35. Q. Fu, M.N. Rahaman, F. Dogan, and B.S. Bal Freeze casting of porous hydroxyapatite scaffolds. I. Processing and general microstructure J Biomed Mater Res B 86B 2008 125 135
36. Q. Fu, M.N. Rahaman, F. Dogan, and B.S. Bal Freeze casting of porous hydroxyapatite scaffolds. II. Sintering, microstructure, and mechanical behavior J Biomed Mater Res B 86B 2008 514 522
37. S. Deville, E. Saiz, and A.P. Tomsia Ice-templated porous alumina structures Acta Mater 55 2007 1965 1974
38. J.C. Li, and D.C. Dunand Mechanical properties of directionally freeze-cast titanium foams Acta Mater 59 2011 146 158
39. 3 ceramics prepared via a novel freeze casting route Ceram Int 36 2010 2499 2503
40. B.H. Yoon, W.Y. Choi, H.E. Kim, J.H. Kim, and Y.H. Koh Aligned porous alumina ceramics with high compressive strengths for bone tissue engineering Scripta Mater 58 2008 537 540
41. Y.M. Soon, K.H. Shin, Y.H. Koh, W.Y. Choi, and H.E. Kim Assembling unidirectionally frozen alumina/camphene bodies for aligned porous alumina ceramics with larger dimensions J Eur Ceram Soc 31 2011 415 419
42. 2 ceramics fabricated by a camphene-based freeze-casting route: microstructure and properties J Eur Ceram Soc 30 2010 53 60
43. X. Liu, M.N. Rahaman, and Q.A. Fu Oriented bioactive glass (13-93) scaffolds with controllable pore size by unidirectional freezing of camphene-based suspensions: microstructure and mechanical response Acta Biomater 7 2011 406 416
44. S.W. Yook, H.E. Kim, and Y.H. Koh Fabrication of porous titanium scaffolds with high compressive strength using camphene-based freeze casting Mater Lett 63 2009 1502 1504
45. L.F. Hu, C.A. Wang, Y. Huang, C.C. Sun, S. Lu, and Z.J. Hu Control of pore channel size during freeze casting of porous YSZ ceramics with unidirectionally aligned channels using different freezing temperatures J Eur Ceram Soc 30 2010 3389 3396
46. Y.H. Koh, K.H. Shin, Y.M. Soon, J.H. Lee, W.Y. Choi, and H.E. Kim Fabrication of highly porous titanium (Ti) scaffolds with two interlaced periodic pores Mater Lett 63 2009 1341 1343
47. Y.H. Koh, J.H. Lee, H.E. Kim, and K.H. Shin Improving the strength and biocompatibility of porous titanium scaffolds by creating elongated pores coated with a bioactive, nanoporous TiO(2) layer Mater Lett 64 2010 2526 2529
48. D.C. Dunand, and D.J. Jorgensen Structure and mechanical properties of Ti-6Al-4V with a replicated network of elongated pores Acta Mater 59 2011 640 650
49. Y. Chino, and D.C. Dunand Creating aligned, elongated pores in titanium foams by swaging of preforms with ductile space-holder Adv Eng Mater 11 2009 52 55
50. 2, and hydroxyapatite ceramics with pores similar to a honeycomb structure Adv Eng Mater 4 2002 487 490
51. U.G.K. Wegst, M. Schecter, A.E. Donius, and P.M. Hunger Biomaterials by freeze casting Philos Trans R Soc A 368 2010 2099 2121
52. T. Fukasawa, Z.Y. Deng, M. Ando, T. Ohji, and S. Kanzaki Synthesis of porous silicon nitride with unidirectionally aligned channels using freeze-drying process J Am Ceram Soc 85 2002 2151 2155
53. S. Blindow, M. Pulkin, D. Koch, G. Grathwohl, and K. Rezwan Hydroxyapatite/SiO(2) composites via freeze casting for bone tissue engineering Adv Eng Mater 11 2009 875 884
54. M. Pulkin, D. Koch, and G. Grathwohl Silica effect on porous calcium phosphate ceramics from the freeze gelation route Int J Appl Ceram Technol 2010 1 11
55. 2/camphene slurries Mater Lett 62 2008 4506 4508
56. J.W. Halloran, and K. Araki Porous ceramic bodies with interconnected pore channels by a novel freeze casting technique J Am Ceram Soc 88 2005 1108 1114
57. Y.H. Koh, B.H. Yoon, C.S. Park, and H.E. Kim Generation of large pore channels for bone tissue engineering using camphene-based freeze casting J Am Ceram Soc 90 2007 1744 1752
58. E.J. Lee, Y.H. Koh, B.H. Yoon, H.E. Kim, and H.W. Kim Highly porous hydroxyapatite bioceramics with interconnected pore channels using camphene-based freeze casting Mater Lett 61 2007 2270 2273
59. C.A. Wang, R.F. Chen, Y. Huang, L.G. Ma, and W.Y. Lin Ceramics with special porous structures fabricated by freeze-gelcasting: using tert-butyl alcohol as a template J Am Ceram Soc 90 2007 3478 3484
60. Q. Fu, M.N. Rahaman, F. Dogan, and B.S. Bal Freeze-cast hydroxyapatite scaffolds for bone tissue engineering applications Biomed Mater 3 2008 025005
61. M.N. Rahaman, and Q. Fu Manipulation of porous bioceramic microstructures by freezing of suspensions containing binary mixtures of solvents J Am Ceram Soc 91 2008 4137 4140
62. E.S. Thomson, J.S. Wettlaufer, and L.A. Wilen A direct optical method for the study of grain boundary melting Rev Sci Instrum 2009 80
63. V. Vorlicek, and P.E.J. Flewitt Cooling induced segregation of impurity elements to grain-boundaries in Fe-3 wt%-Ni alloys, 2.25 wt%-Cr-1 wt%-Mo steel and submerged-arc weld metal Acta Metall Mater 42 1994 3309 3320
64. T.E. Hsieh, and R.W. Balluffi Experimental study of grain-boundary melting in aluminum Acta Metall Mater 37 1989 1637 1644
65. Z. Schwartz, E. Nasazky, and B.D. Boyan Surface microtopography regulates osteointegration: the role of implant surface microtopography in osteointegration Alpha Omegan 98 2005 9 19
66. A. Macchetta, I.G. Turner, and C.R. Bowen Fabrication of HA/TCP scaffolds with a graded and porous structure using a camphene-based freeze-casting method Acta Biomater 5 2009 1319 1327
67. P. Liu, Q.B. Tan, L.H. Wu, and G. He Compressive and pseudo-elastic hysteresis behavior of entangled titanium wire materials Mater Sci Eng A: Struct 527 2010 3301 3309
68. W.Y. Jang, S. Kyriakides, and A.M. Kraynik On the compressive strength of open-cell metal foams with Kelvin and random cell structures Int J Solids Struct 47 2010 2872 2883