Die wear in stamping of advanced high strength steels - Investigations on the effects of substrate material and hard-coatings

Tribology International

Volumn 52, Issue , 2012, Pages 50-60

  Cora, Ömer Necati ^a,b   Agcayaz, Ali ^a,b   Namiki, Kunio ^c   Sofuoglu, Hasan ^a   Koç, Muammer ^b,d  

^a KARADENIZ TECHNICAL UNIVERSITY   (Turkey)

^b NSF I/UCR Center for Precision Forming   (United States)

^c DAIDO STEEL CO LTD   (Japan)

^d ISTANBUL SEHIR UNIVERSITY   (Turkey)

Author keywords

AHSS sheet; Hard coatings; Stamping die; Wear test

Indexed keywords

ADVANCED HIGH STRENGTH STEEL; AHSS SHEET; COATED SAMPLE; DIE WEARS; SUBSTRATE MATERIAL; WEAR PERFORMANCE; WEAR RATES; WEAR TEST;

MECHANICAL ENGINEERING; TRIBOLOGY;

HARD COATINGS;

EID: 84860512274     PISSN: 0301679X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.triboint.2012.02.016     Document Type: Article

References (28)

1. Hall J, Mullholland T, Young D, Investigation of stamping tooling durability for dual phase steels, in Proceedings of SAE 2011 World Congress & Exhibition, April 12-14, 2011, Detroit, MI, USA.
2. H Kim, S Han, Q Yan, and T Altan Evaluation of tool materials, coatings and lubricants in forming of advanced high strength steels (AHSS) CIRP Annals 57 2008 299 304
3. Meyecic, J, Die development for AHSS case study, Great Designs in Steel Seminar 2011, May 18, 2011, Livonia, MI, USA.
4. K Holmberg, A Matthews, and H Ronkainen Coatings tribology - contact mechanisms and surface design Tribology International 31 1-2 1998 107 120
5. J Hardell, and B Prakash High-temperature friction and wear behaviour of different tool steels during sliding against Al-Si-coated high-strength steel Tribology International 41 2008 663 671
6. T Skåre, and F Krantz Wear and frictional behaviour of high strength steel in stamping monitored by acoustic emission technique Wear 255 2003 1471 1479
7. J.L. Andreasen, D.D. Olsson, K. Chodnikiewicz, and N. Bay Bending under tension test with direct friction measurement Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 220 2006 73 80
8. Cora, ÖN, Development of rapid die wear test method for assessment of die life and performance in stamping of Advanced/Ultra High Strength Steel (A/UHSS) sheet materials, PhD Disstertation, Virginia Commonwealth University, Richmond, VA, USA, 2009.
9. E. Schedin, and B. Lehtinen Galling mechanisms in lubricated systems: a study of sheet metal forming Wear 119 1993 119 130
10. A Gåård, PV Krakhmalev, J Bergström, and N Hallbäck Galling resistance and wear mechanisms - cold work tool material sliding against carbon steel sheets Tribology Letters 26 2007 67 72
11. MP Pereira, W Yan, and BF Rolfe Contact pressure evolution and its relation to wear in sheet metal forming Wear 265 11-12 2008 1687 1699
12. Westeneng, JD, Modelling of contact and friction in deep drawing processes, PhD Dissertation, University of Twente, The Netherlands, 2001.
13. H. Lundh, P-A&ring, Bustad, B. Carlsson, G. Engberg, L. Gustafsson, and R. Lidgren Sheet steel forming handbook - size shearing and plastic forming 1998 SSAB Tunnplåt AB Göteborg, Sweden
14. Ö.N. Cora, K. Namiki, and M. Koç, Wear performance assessment of alternative stamping die materials utilizing a novel test system Wear 267 5-8 2009 1123 1129
15. Cora, ÖN, Koç, M, (2009), Influence of substrate material on wear performance of stamping dies utilizing a new die wear test system, Transactions of the North American Manufacturing Research Institute of SME, (NAMRC 2009, May 19-22, 2009, Clemson, SC, USA), Vol.37, pp. 325-331.
16. Ö.N. Cora, and M. Koç, Experimental investigations on wear resistance characteristics of alternative die materials for stamping of advanced high-strength steels (AHSS) International Journal of Machine Tools and Manufacture 49 2009 897 905
17. Advanced High Strength Steel (AHSS) Application Guidelines, Vol. 4.1, June 2009, Stuart Keeler (Ed.), Available also at: 〈http://www. worldautosteel.org/uploaded/AHSS%20Application%20Guidelines%204-1%20June%202009. pdf〉, (accessed 14/9/2011).
18. Carpenter, JA, Automotive lightweighting materials, Great Design in Steel Seminar 2004, February 18th, 2004, Livonia, MI, USA.
19. Hall, JN, 50 year perspective of automotive engineering body materials and an analysis of the future, Great Designs in Steel Seminar 2008, April 9th, 2008, Livonia, MI, USA.
20. Schultz, RA, Abraham, AK, Metallic material trends for North American light vehicles, Great Designs in Steel Seminar 2009, May 13th, 2009, Livonia, MI, USA.
21. Johansson, B, Olsson, K, Tooling solutions for advanced high strength steels, Uddeholm Automotive Tooling Seminar, February 9-11, 2005, Sunne, Sweden. Available also online at: 〈http://www.istma.org/istma-world/ISTMA- Conferencehall/uddeholm2005/AHSS%20Johansson-Olsson.pdf〉, (accessed 14/9/2011)
22. Docol DP/DL cold reduced dual phase steels - product information sheet, available also in SSAB web site: 〈http://www.ssab.com/Global/DOCOL/ datasheets-docol/en/201-Docol%20DP,%20DL.pdf〉, (accessed 14/9/2011).
23. ASM Handbooks, Standard terminology relating to wear and erosion, ASTM Standard G40-95, in: Friction and Wear Testing - Source Book: Selected References from ASTM Standards and ASM Handbooks 1997 American Society for Testing and Materials West Conshohocken, PA, USA p. 97
24. JF Archard Contact and rubbing of flat surfaces Journal of Applied Physics 24-28 1956 981 988
25. Cora, ÖN, Namiki, K Koç, M, (2010), Wear tests for stamping dies via slider type of test system, in: Proceedings of 4th International Conference on Tribology in Manufacturing Processes - ICTMP 2010, June 13-15, 2010, Nice, France.
26. IM Hutchings Abrasive and erosive wear tests for thin coatings: a unified approach Tribology International 31 1-3 1998 5 15
27. K. Allen, and A.A. Torrance Coatings to improve wear resistance of a low alloy steel Tribology International 19 2 1986 123 127
28. K.H. Lau, and K.Y. Li Correlation between adhesion and wear behaviour of commercial carbon based coating Tribology International 39 2006 115 123