Influence of substrate material on wear performance of stamping dies utilizing a new die wear test system

Transactions of the North American Manufacturing Research Institution of SME

Volumn 37, Issue , 2009, Pages 325-331

  Cora, Ömer N ^a   Koç, Muammer ^a  

^a Virginia Commonwealth University   (United States)

Author keywords

Coatings; Die materials; Die wear test; Stamping; U AHSS

Indexed keywords

ADVANCED HIGH STRENGTH STEEL; COLD WORKS; CONTACT PAIR; CONTACT PRESSURES; CONTACT STRESS; DIE MATERIALS; DIE SURFACE; DIE WEAR TEST; DIE WEARS; DIFFERENT SUBSTRATES; EXPERIMENTAL METHODOLOGY; HIGH STRENGTH STEEL; MODIFIED SURFACES; NON-UNIFORM STRAIN; NORMAL FORCES; SLIDING VELOCITIES; SPRING-BACK; STAMPING DIES; SUBSTRATE MATERIAL; TEST SYSTEMS; VERTICAL MACHINING; WEAR EFFECTS; WEAR PERFORMANCE; WEAR RATES;

COATED MATERIALS; ELASTICITY; INDUSTRIAL RESEARCH; POWDER COATINGS; STAINLESS STEEL; STAMPING; STEEL METALLURGY; STEEL SHEET; SUBSTRATES; TESTING; WEAR RESISTANCE;

DIES;

EID: 70449673062     PISSN: 10473025     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (24)

1. Attaf, D., L. Penazzi, C. Boher, and C. Levaillant (2002). "Mechanical Study of a Sheet Metal Forming Dies Wear." Proceedings of the Sixth International Tooling Conference, 10-13 September 2002, Karlstad University, Germany.
2. Blau, P.J. and K.G. Budinski (1999). "Development and Use of ASTM Standards for Wear Testing." Wear Vol. 225-229 pp. 1159-1170.
3. Boher, C., D. Attaf, L. Penazzi, and C. Levaillant (2005), 'Wear Behaviour on the Radius Portion of a Die in Deep-Drawing: Identification, Localisation and Evolution of the Surface Damage." Wear, Vol. 259, pp. 1097-1108.
4. Cora, Ö.N., Y. Usta, and M. Koç (2007). "Experimental Investigations on Development of Rapid Die Wear Tests for Stamping of Advanced High Strength Steels." Proceedings of the 2007 International Manufacturing Science And Engineering Conference - MSEC2007, October 15-17, 2007, Atlanta, Georgia, USA.
5. Cora, Ö.N. and M. Koç (2008a). "Effect of Substrate Hardness on Wear Performance of Alternative Die Materials for Stamping of Advanced High Strength Steels." Proceedings of the 2008 Material Science and Technology (MS&T) Conference, October 5-9, 2008, Pittsburgh, PA.USA.
6. Cora, Ö.N. and M. Koç (2008b). "Wear Performance Assessment Of Alternative Stamping Die Materials Utilizing a Novel Test System." to be presented in Wear of Materials 2009 conference, April 19-23 2009, Las Vegas, Nevada, USA.
7. Costello, M.T. and I.I. Riff (2005). "Study of Hydroforming Lubricants with Overbased Sulfonates and Friction Modifiers." Tribology Letters, Vol. 20(3-4), pp. 201-208.
8. Cuddy, V.K., H. Merkle, A. Richardson, O. Hudin, A. Hildenbrand, H. Richter, T. Nilsson, and J. Larsson (2005). "Manufacturing Guidelines When Using Ultra High Strength Steels in Automotive Applications." European Commission - Technical Steel Research, Final Report, ISBN 92-79-00139-6, Luxembourg.
9. Dalton, G. (2002). Enhancing Stamping Performance of High Strength Steels with Tribology. Report on Phase 1 Testing (Prepared for the Auto/Steel Partnership Tribology Team). TribSys Inc., Ontario, Canada.
10. Dalton, G. (2004). Enhancing Stamping Performance of High Strength Steels with Tribology. Report on Phase 3 Testing (Prepared for the Auto/Steel Partnership Tribology Team). TribSys Inc., Ontario, Canada.
11. Eriksen, M. (1997). "The influence of die geometry on tool wear in deep drawing." Wear, Vol. 207, pp. 123-128.
12. Hardell, J (2007). High Temperature Tribology of High Strength Boron Steel and Tool Steels. Licentiate Thesis. Luleå University of Technology, Luleå, Sweden.
13. Hortig, D. and D. Schmoeckel (2001). "Analysis of Local Loads on the Draw Die Profile with Regard to Wear Using the FEM and Experimental Investigations." Journal of Materials Processing Technology, Vol. 115, pp. 153-158.
14. Jonasson, M., T. Pulkinen, L. Gunnarsson, and E. Schedin (1997). "Comparative Study of Shotblasted and Electrical-discharge-textured Rolls." Wear, Vol. 207, pp. 34-40.
15. Lenard, J.G., J.B. Medley, and J.A. Schey (1996). "Laboratories at Work: Tribology at the University of Waterloo." Tribotest Journal, Vol. 2, pp. 383-394.
16. Miller P. from Böhler-Uddeholm Corp., Personal Communication, 2008.
17. Nilsson, A., P. Gabrielson, and J. Ståhl (2002). "Zinc-alloys as Tool Materials in Short-run Sheet-metal Forming Processes - Experimental Analysis of Three Different Zinc-alloys." Journal of Materials Processing Technology, Vol. 125-126, pp. 806-813.
18. Podgornik, B., S. Hogmark, and J. Pezdirnik (2004). "Comparison Between Different Test Methods for Evaluation of Galling Properties of Surface Engineered Tool Surfaces." Wear, Vol. 257, pp. 843-851.
19. Rabinowicz, E. (1995). Friction and Wear of Materials. 2nd ed., John Wiley & Sons, Inc., Canada, p. 112.
20. Sanchez, L.R. (1999). "Characterization of a Measurement System for Reproducible Friction Testing on Sheet Metal Under Plane Strain" Tribology International, Vol. 32, pp. 575-586.
21. Sato, T. and T. Besshi (1998), "Anti-galling Evaluation in Aluminum Sheet Forming." Journal of Materials Processing Technology, Vol. 83, pp. 185-191.
22. Schedin, E. (1994), "Galling mechanisms in sheet forming operations." Wear, Vol. 179, pp. 123-128.
23. van der Heide, E., E.D. Stam, H. Giraud, G. Lovato, N. Akdut, F. Clarysse, P. Caenen, and I. Heikillä (2006). "Wear of Aluminum Bronze in Sliding Contact with Lubricated Stainless Steel Sheet Material." Wear, Vol. 261, pp. 68-73.
24. Wan, Y. and Q. Xue (1995). "Effect of Antiwear and Extreme Pressure Additives on the Wear of Aluminium Alloy in Lubricated Aluminum-on-Steel Contact." Tribology International, Vol. 28 Issue 8, pp. 553-557.