Experimental investigations on wear resistance characteristics of alternative die materials for stamping of advanced high-strength steels (AHSS)

International Journal of Machine Tools and Manufacture

Volumn 49, Issue 12-13, 2009, Pages 897-905

  Cora, Ömer Necati ^a   Koç, Muammer ^a  

^a Virginia Commonwealth University   (United States)

Author keywords

AHSS; Die wear; High strength steels; Stamping; Wear rate

Indexed keywords

AHSS; AISI D2; AUTOMOTIVE BODY PANELS; DIE MATERIALS; DIE WEAR; EXPERIMENTAL INVESTIGATIONS; HIGH-STRENGTH STEELS; LIGHT-WEIGHT CONSTRUCTIONS; SPRING-BACK; STRUCTURAL PARTS; SURFACE HARDNESS; TRIBOLOGICAL CONDITIONS; WEAR PERFORMANCE; WEAR RATE; WEAR-TESTING; WORK HARDENING;

DIES; LUBRICANTS; MATERIALS TESTING; METAL ANALYSIS; STAMPING; STEEL SHEET; STRAIN HARDENING; TOOL STEEL;

WEAR RESISTANCE;

EID: 68349123585     PISSN: 08906955     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijmachtools.2009.07.003     Document Type: Article

References (48)

1. Advanced High Strength Steel (AHSS) Application Guidelines, vol. 4.0, Ed. Stuart Keeler, March 2009, pp. 2-40, available at 〈www.WorldAutoSteel.org〉, Last access date: June 23, 2009.
2. G. Dalton, Enhancing stamping performance of high strength steels with tribology, Report on Phase 3 Testing, Prepared for the Auto/Steel Partnership Tribology Team, Ontario, Canada, 2004.
3. Gåård A., Krakhmalev P., and Bergström J. Wear mechanisms in deep drawing of carbon steel- correlation to laboratory testing. Tribotest 14 (2008) 1-9
4. van der Heide E., Burlat E.M., and Schipper D.J. Wear of soft tool materials in sliding contact with zinc-coated steel sheet. Journal of Materials Processing Technology 141 (2003) 197-201
5. Rabinowicz E. Friction and Wear of Materials (1995), John Wiley & Sons, Inc., Canada p. 112
6. Blau P.J., and Budinski K.G. Development and use of ASTM standards for wear testing. Wear 225-229 (1999) 1159-1170
7. Gwidon W. Stachowiak, Andrew W. Bathcelor, Grazyna B. Stachowiak, Experimental Methods in Tribology, pp. 27-29, Tribology Series, vol. 44, Editor D. Dowson, Elsevier B.V. Amsterdam, The Netherlands 2004.
8. Lenard J.G., Medley J.B., and Schey J.A. Laboratories at Work: Tribology at the University of Waterloo. Tribotest Journal 2 (1996) 383-394
9. Costello M.T., and Riff I.I. Study of hydroforming lubricants with overbased sulfonates and friction modifiers. Tribology Letters 20 3-4 (2005) 201-208
10. G. Dalton, enhancing stamping performance of high strength steels with tribology, Report on Phase 1 Testing (Prepared for the Auto/Steel Partnership Tribology Team), TribSys Inc., Ontario, Canada, 2002.
11. Podgornik B., Hogmark S., and Pezdirnik J. Comparison between different test methods for evaluation of galling properties of surface engineered tool surfaces. Wear 257 7-8 (2004) 843-851
12. Wan Y., and Xue Q. Effect of antiwear and extreme pressure additives on the wear of aluminium alloy in lubricated aluminium-on-steel contact. Tribology International 28 8 (1995) 553-557
13. J. Hardell, High Temperature tribology of high strength boron steel and tool steels, Licentiate Thesis, Luleå University of Technology, Luleå, Sweden, June 2007.
14. Bernick L.M., Hilsen R.R., and Wandrei C.L. Development of a quantitative sheet galling test. Wear 48 (1978) 323-346
15. Boher C., Attaf D., Penazzi L., and Levaillant C. Wear behaviour on the radius portion of a die in deep-drawing: identification, localisation and evolution of the surface damage. Wear 259 (2005) 1097-1108
16. Sato T., and Besshi T. Anti-galling evaluation in aluminum sheet forming. Journal of Materials Processing Technology 83 (1998) 185-191
17. Schedin E. Galling mechanisms in sheet forming operations. Wear 179 (1994) 123-128
18. Nilsson A., Gabrielson P., and Ståhl J. Zinc-alloys as tool materials in short-run sheet-metal forming processes-Experimental analysis of three different zinc-alloys. Journal of Materials Processing Technology 125-126 (2002) 806-813
19. Jonasson M., Pulkinen T., Gunnarsson L., and Schedin E. Comparative study of shotblasted and electrical-discharge-textured rolls. Wear 207 (1997) 34-40
20. Hortig D., and Schmoeckel D. Analysis of local loads on the draw die profile with regard to wear using the FEM and experimental investigations. Journal of Materials Processing Technology 115 (2001) 153-158
21. Nine H.D. Draw bead forces in sheet metal forming. In: Koistinen D.P., and Wang N.M. (Eds). Mechanics of Sheet Metal Forming (1978), Plenum Press, New York 1978 pp. 179-211
22. Sanchez L.R. Characterization of a measurement system for reproducible friction testing on sheet metal under plane strain. Tribology International 32 (1999) 575-586
23. Eriksen M. The influence of die geometry on tool wear in deep drawing. Wear 207 (1997) 10-15
24. Alinger M.J., and Van Tyne C.J. Evolution of die surfaces during repeated stretch-bend sheet steel deformation. Journal of Materials Processing Technology 141 (2003) 411-419
25. Emmens W.C., and van den Boogarard A.H. Incremental forming by continuous bending under tension-an experimental investigation. Journal of Materials Processing Technology 209 (2009) 5456-5463
26. Pereira M.P., Yan W., and Rolfe B.F. Contact pressure evolution and its relation to wear in sheet metal forming. Wear 265 11-12 (2008) 1687-1699
27. Klocke F., Maßmann T., Bobzin K., Lugscheider E., and Bagcivan N. Carbon based tool coatings as an approach for environmentally friendly metal forming processes. Wear 260 3 (2006) 287-295
28. van der Heide E., Stam E.D., Giraud H., Lovato G., Akdut N., Clarysse F., Caenen P., and Heikillä I. Wear of aluminium bronze in sliding contact with lubricated stainless steel sheet material. Wear 261 (2006) 68-73
29. van der Heide E., Huis in 't Veld A.J., and Schipper D.J. The effect of lubricant selection on galling in a model wear test. Wear 251 1-12 (2001) 973-979
30. Gåård A., Krakhmalev P.V., Bergström, and Hallbäck N. Galling resistance and wear mechanisms- cold work tool material sliding against carbon steel sheets. Tribology Letters 26 (2007) 67-72
31. V.K. Cuddy, H. Merkle, A. Richardson, O. Hudin, A. Hildenbrand, H. Richter, T. Nilsson, J. Larsson, Manufacturing guidelines when using ultra high strength steels in automotive applications, European Commission-Technical Steel Research, Final Report, ISBN 92-79-00139-6, Luxembourg, 2005.
32. Oliver S., Jones T.B., and Fourlaris G. Dual phase versus TRIP strip steels: Microstructural changes as a consequence of quasi-static and dynamic tensile testing. Materials Characterization 58 (2007) 390-400
33. Böhler-Uddeholm product specification sheet for D2 tool steel, Web page: 〈http://www.bucorp.com/files/aisi_d2.pdf〉, Last access date: June 23, 2009.
34. Böhler-Uddeholm product specification sheet for Caldie tool steel, Web page: 〈http://www.bucorp.com/files/caldie-english_061104-1.pdf〉, Last access date: June 23, 2009.
35. Böhler-Uddeholm product specification for Vanadis 4 extra powder metallurgical tool steel, Web page: 〈http://www.bucorp.com/files/Vanadis_4_Extra_Am.pdf〉, Last access date: June 23, 2009.
36. Böhler-Uddeholm product specification sheet for K340 ISODUR cold work tool steel, Web page: 〈http://www.bucorp.com/files/k340.pdf〉, Last access date: June 23, 2009.
37. Böhler-Uddeholm product specification sheet for Vancron 40 cold work tool steel, Edition 5, Web page: 〈http://www.uddeholm.com/files/vancron_40-english.pdf〉, Last access date: June 23, 2009
38. Böhler-Uddeholm product specification sheet for Carmo tool steel, Web page: 〈http://www.uddeholm.nl/dutch/files/Uddeholm_carmo_E.pdf〉, Last access date: June 23, 2009.
39. Steel Castings Handbook, Supplement 2, and 1999 Summary of Standard Specification for Steel Castings, Steel Founder's Society of America, Prepared by the Specifications Committee Steel Founders' Society of America, Revised by David Poweleit, 1999.
40. Automotive Steel Design Manual, Revision 6.1, American Iron and Steel Institute & Auto/Steel Partnership, August 2002, Web page: 〈http://www.a-sp.org/database/default.asp?doc=28〉, Last access date: June 23, 2009.
41. Metals Handbook, vol. 1, Properties and Selection: Irons and Steels, fifth edition, American Society for Metals, 1990 p.378.
42. Patricia Miller,Personal communication, Böhler-Uddeholm USA, June 2009.
43. B.F. Kuvin, "Ford's New DP 600 Die Standards", Metal Forming Magazine, February 2006, pp. 20-22.
44. Bay Cast Inc. Web Page: 〈www.baycastinc.com〉, Last access date: June 23, 2009.
45. Meng H.C., and Ludema K.C. Wear models and predictive equations: their form and content. Wear 181-183 (1995) 443-457
46. K. Holmberg, Quality of Reporting Empirical Results in Tribology, International Research Group on Wear of Engineering Materials, IRG-OECD meeting, 13-14 June, Uppsala, Sweden 2005.
47. Yan W. Theoretical investigation of wear-resistance mechanism of superelastic shape memory alloy NiTi. Materials Science and Engineering A 427 (2006) 349-355
48. Nilsson A., Gabrielson P., and Stahl J. Zinc-alloys as tool materials in short-run sheet metal forming processes, Experimental analysis of three different zinc-alloys. Journal of Materials Processing Technology 125-126 (2002) 806-813