Effects of artificial polluting methods on AC flashover voltage of composite insulators

IEEE Transactions on Dielectrics and Electrical Insulation

Volumn 19, Issue 2, 2012, Pages 714-722

  Dong, Bingbing ^a   Jiang, Xingliang ^a   Hu, Jianlin ^a   Shu, Lichun ^a   Sun, Caixin ^a  

^a CHONGQING UNIVERSITY   (China)

Author keywords

ac flashover voltage; composite insulators; flashover characteristics; polluting methods; Power system; solid layer method

Indexed keywords

ARTIFICIAL CLIMATE CHAMBER; ARTIFICIAL POLLUTION TEST; BRUSHING METHODS; COMPOSITE INSULATORS; DIPPING METHOD; FITTING FORMULA; FLASHOVER PERFORMANCE; FLASHOVER VOLTAGE; POLLUTING METHODS; POLLUTION DEGREE; POLLUTION FLASHOVER CHARACTERISTICS; POLLUTION FLASHOVER VOLTAGES; SILICONE RUBBER; SOLID LAYERS;

ELECTRIC INSULATORS; INSULATING MATERIALS; POLLUTION; SILICONES; STANDBY POWER SYSTEMS;

FLASHOVER;

EID: 84860184559     PISSN: 10709878     EISSN: None     Source Type: Journal    
DOI: 10.1109/TDEI.2012.6180267     Document Type: Article

References (27)

1. X. Jiang, L. Shu and C. Sun, Insulation of Electric Power system under Pollution and Icing conditions, Beijing, China Electric Power Press, 2009 (in Chinese).
2. Y. Khan, A.A. Al-Arainy, N.H. Malik, M.I. Qureshi and A.E. Al-Ammar, "Evaluation methods of polymer insulators under contaminated conditions", Power and Energy Engineering Conf. (APPEEC), Asia Pacific, pp. 1-4, 2010.
3. Int. Electrotechnical Commission, "Artificial pollution tests on high-voltage insulators to be used on a.c. systems", Int'l. std. IEC 60507, 1991.
4. P.J. Lambeth, "Variable voltage application for insulator pollution tests", IEEE Trans. Power Del., Vol. 3, pp. 2103-2111, 1988.
5. I. Gutman and A. Dernfalk, "Pollution Tests for Polymeric Insulators made of Hydrophobicity Transfer Materials", IEEE Trans. Dielectr. Electr. Insul., Vol. 17, pp. 384-393, 2010.
6. X. Jiang, J. Yuan, Z. Zhang, Q. Hu and A. Cheng, "Study on AC pollution flashover performance of composite insulators at high altitude sites of 2800-4500 m", IEEE Trans. Dielectr. Electr. Insul., Vol. 16 , pp.123-132, 2009.
7. X. Jiang, S. Wang, Z. Zhang, J. Hu and Q. Hu, "Investigation of flashover voltage and non-uniform pollution correction coefficient of short samples of composite insulator intended for ±800 kV UHVDC", IEEE Trans. Dielectr. Electr. Insul., Vol. 17 , pp.71-80, 2010.
8. R. Matsuoka, H. Shinokubo, K. Kondo, Y. Mizuno, K. Naito, T. Fujimura, and T. Terada, "Assessment of basic contamination withstand voltage characteristics of polymer insulators", IEEE Trans. Power Del., Vol. 11, pp. 1895-1900, 1996.
9. G. N. Ramos, M. T. R. Campillo, and K. Naito, "A study on the characteristics of various conductive contaminants accumulated on high voltage insulators", IEEE Trans. Power Del., Vol. 8, pp. 1842-1850, Oct. 1993.
10. Z. Zhang, X. Jiang, C. Sun, J. Yuan and Y. Zhang, "Comparison of the AC Pollution Flashover Characteristics of Insulators Under Two Different Polluting Manners", Proc. Chinese Soc. Electr. Eng. (CSEE), Vol. 2, pp. 124-127, 2006 (in Chinese).
11. X. Jiang, J. Hu and Y. Liang, "Pollution Flashover Performance of Short Sample for 750kV Composite Insulators", IEEE Int'l. Sympos. Electr. Insul. (ISEI), Indianapolis, USA, pp. 19-22, 2004.
12. X. Liang, "The Special Problem of Composite Insulators in Pollution Test", Proc. International Conference on Physics Science and Technology (ICPST), Vol.2, No. 10, pp.1263-1266, 1994.
13. L. Xidong, W. Shaowu and H. Lengceng, "Artificial pollution test and pollution performance of composite insulators", High Voltage Eng. Sympos. pp.22-27, 1999 (in Chinese).
14. CIGRé C4.303, "Polluted Insulators: Guidelines for selection and dimensioning Part 1: General principles and the ac case", 2007.
15. IEC 60815 -Selection and dimensioning of high-voltage insulators for polluted conditions -Part 1: Definitions, information and general principles", Int. Electrotech. Comm. Geneva, Switzerland, 2008.
16. IEC 60815 -Selection and dimensioning of high-voltage insulators for polluted conditions -Part 3: Polymer insulators for a.c. systems", Int'l. Electrotech. Comm. Geneva, Switzerland, 2008.
17. IEEE Standard Techniques for High-Voltage Testing, IEEE Std. 4, IEEE Publ., 1995.
18. GB/T4585-2004, "Artificial pollution tests on high-voltage insulators to be used on AC systems" (in Chinese).
19. "Artificial pollution tests on composite insulators used on high-voltage ac system", 2004, DL/T859-2004, (in Chinese).
20. I. Gutman, X. Liang, B. Luo, Z. Su, E. Solomonik, and W. Vosloo, "Evaluation of OHL performance based on environmental stresses and pollution laboratory testing of composite insulators", CIGRé Session, Paris, C4-112, 2008.
21. D.A. Swift, C. Spellman and A. Haddad, "Hydrophobicity Transfer from Silicone Rubber to Adhering Pollutants and its Effect on Insulator Performance", IEEE Trans. Dielectr. Electr. Insul., Vol. 13, pp. 820-829, 2006.
22. M. Fazelian, C. Y. Wu, T. C. Cheng, H. I. Nour and L. J. Wang, "Loss and Recovery of Hydrophobicity of EPDM Insulators in Simulated Arid Desert Environment", IEEE Trans. Electr. Insul., Vol. 24, pp. 119-125, 1989.
23. A.De La O and R.Gorur, "AC clean fog tests on nonceramic insulating materials and a comparison with porcelain", IEEE Trans. Power Delivery,Vol. 9, pp. 2000-2008, 1994.
24. A. Haddad, R. Waters, H. Griffiths, K. Chrzan, N. Harid, P. Sarkar and P. Charalampidis, "A new approach to anti-fog design for polymeric insulators", IEEE Trans. Dielectr. Electr. Insul. , Vol. 17, pp. 343-350, 2010.
25. C.A. Spellman, H. Young, A. Haddad and R. Stone, "A new technique for pollution testing of polymeric insulators under Clean-fog conditions", 12th Int'l. Sympos. High Voltage Engineering (ISH), Vol. 3, pp. 583-586, Bangalore, India, 2001.
26. IEC TS 60073-Guidance on the measurement of wettability of insulator surfaces", Intern. Electrotech. Comm. Geneva, Switzerland, 2003.
27. D. Xiao, Artificial Contaminated Test Methods of Composite Insulators [D], Chongqing, Chongqing university, 2009 (in Chinese).