Performance improvement of polysulfone ultrafiltration membrane using well-dispersed polyaniline-poly(vinylpyrrolidone) nanocomposite as the additive

Industrial and Engineering Chemistry Research

Volumn 51, Issue 12, 2012, Pages 4661-4672

  Zhao, Song ^a   Wang, Zhi ^a   Wei, Xin ^a   Zhao, Boran ^a   Wang, Jixiao ^a   Yang, Shangbao ^a   Wang, Shichang ^a  

^a TIANJIN UNIVERSITY   (China)

Author keywords

[No Author keywords available]

Indexed keywords

ANTIFOULING PROPERTY; BOVINE SERUM ALBUMINS; CARBONYL GROUPS; CROSS FLOWS; DISPERSION POLYMERIZATION; FLUX DECLINE; FLUX RECOVERY; HYDROPHILIC MODIFICATION; IMMERSION PRECIPITATION; MEMBRANE FORMATION; MEMBRANE SURFACE; MODEL SYSTEM; NANOCOMPOSITE MEMBRANES; PERFORMANCE IMPROVEMENTS; PORE-FORMING AGENTS; PSF MEMBRANES; PURE WATER; ULTRA-FILTRATION MEMBRANES; VINYL PYRROLIDONE; WELL-DISPERSED;

HYDROGEN BONDS; HYDROPHILICITY; NANOCOMPOSITES; PERMEATION; POLYANILINE; PRECIPITATION (CHEMICAL); ULTRAFILTRATION;

MEMBRANES;

EID: 84859126806     PISSN: 08885885     EISSN: 15205045     Source Type: Journal    
DOI: 10.1021/ie202503p     Document Type: Article

References (59)

1. Ghosh, A. K.; Hoek, E. M. V. Impacts of support membrane structure and chemistry on polyamide-polysulfone interfacial composite membranes J. Membr. Sci. 2009, 336, 140
2. Zhang, Y.; Jin, Z.; Wang, Y.; Cui, P. Study on phosphorylated Zr-doped hybrid Silicas/PSF composite membranes for treatment of wastewater containing oil J. Membr. Sci. 2010, 361, 113
3. Arthanareeswaran, G.; Mohan, D.; Raajenthiren, M. Preparation, characterization and performance studies of ultrafiltration membranes with polymeric additive J. Membr. Sci. 2010, 350, 130
4. Yu, H. J.; Cao, Y. M.; Kang, G. D.; Liu, J. H.; Li, M; Yuan, Q. Enhancing antifouling property of polysulfone ultrafiltration membrane by grafting zwitterionic copolymer via UV-initiated polymerization J. Membr. Sci. 2009, 342, 6
5. Hyun, J.; Jang, H.; Kim, K.; Na, K.; Tak, T. Restriction of biofouling in membrane filtration using a brush-like polymer containing oligoethylene glycol side chains J. Membr. Sci. 2006, 282, 52
6. Yoo, J. E.; Kim, J. H.; Kim, Y.; Kim, C. K. Novel ultrafiltration membranes prepared from the new miscible blends of polysulfone with poly(1-vinylpyrrolidone- co -styrene) copolymers J. Membr. Sci. 2003, 216, 95
7. Wang, P.; Tan, K. L.; Kang, E. T.; Neoh, K. G. Synthesis, characterization and anti-fouling properties of poly(ethylene glycol) grafted poly(vinylidene-fluoride) copolymer membranes J. Mater. Chem. 2001, 11, 783
8. Ju, H.; McCloskey, B. D.; Sagle, A. C.; Wu, Y.; Kusuma, V. A.; Freeman, B. D. Crosslinked poly(ethylene oxide) fouling resistant coating materials for oil/water separation J. Membr. Sci. 2008, 307, 260
9. Park, J. Y.; Acar, M. H.; Akthakul, A.; Kuhlman, W.; Mayes, A. M. Polysulfone- graft -poly(ethylene glycol) graft copolymers for surface modification of polysulfone membranes Biomaterials 2006, 27, 856
10. Chakrabarty, B.; Ghoshal, A. K.; Purkait, A. K. Preparation, characterization and performance studies of polysulfone membranes using PVP as an additive J. Membr. Sci. 2008, 315, 36
11. Fan, Z. F.; Wang, Z.; Sun, N.; Wang, J. X.; Wang, S. C. Performance improvement of polysulfone ultrafiltration membrane by blending with polyaniline nanofibers J. Membr. Sci. 2008, 320, 363
12. Chakrabarty, B.; Ghoshal, A.; Purkait, M. Effect of molecular weight of PEG on membrane morphology and transport properties J. Membr. Sci. 2008, 309, 209
13. Liu, F.; Xu, Y.; Zhu, B.; Zhang, F.; Zhu, L. Preparation of hydrophilic and fouling resistant poly(vinylidene fluoride) hollow fiber membranes J. Membr. Sci. 2009, 345, 331
14. Palaniappan, S.; Sairam, M. Benzoyl peroxide as a novel oxidizing agent in polyaniline dispersion: Synthesis and characterization of a pure polyaniline-poly(vinyl pyrrolidone) composite J. Appl. Polym. Sci. 2008, 108, 825
15. Han, M. J.; Nam, S. T. Thermodynamic and rheological variation in polysulfone solution by PVP and its effect in the preparation of phase inversion membrane J. Membr. Sci. 2002, 202, 55
16. Jung, B.; Yoon, J.; Kim, B.; Rhee, H. Effect of molecular weight of polymeric additives on formation, permeation properties and hypochlorite treatment of asymmetric polyacrylonitrile membranes J. Membr. Sci. 2004, 243, 45
17. Susanto, H.; Ulbricht, M. Characteristics, performance and stability of polyethersulfone ultrafiltration membranes prepared by phase separation method using different macromolecular additives J. Membr. Sci. 2009, 327, 125
18. Zhao, W.; Huang, J.; Fang, B.; Nie, S.; Yi, N.; Su, B.; Li, H.; Zhao, C. Modification of polyethersulfone membrane by blending semi-interpenetrating network polymeric nanoparticles J. Membr. Sci. 2011, 369, 258
19. Taurozzi, J. S.; Arul, H.; Bosak, V. Z.; Burban, A. F.; Voice, T. C.; Bruening, M. L.; Tarabara, V. V. Effect of filler incorporation route on the properties of polysulfone-silver nanocomposite membranes of different porosities J. Membr. Sci. 2008, 325, 58
20. 2 fillers on the morphologies and properties of PSf UF membrane J. Membr. Sci. 2007, 288, 231
21. 2 nanoparticles on the surface chemistry, structure and fouling performance of PES ultrafiltration membranes J. Membr. Sci. 2011, 378, 73
22. Qiu, S.; Wu, L. G.; Pan, X. J.; Zhang, L.; Chen, H. L.; Gao, C. J. Preparation and properties of functionalized carbon nanotube/PSf blend ultrafiltration membranes J. Membr. Sci. 2009, 342, 165
23. Aerts, P.; Van Hoof, E.; Leysen, R.; Vankelecomb, I. F. J.; Jacobs, P. A. Polysulfone-Aerosil composite membranes. Part 1. The influence of the addition of Aerosil on the formation process and membrane morphology J. Membr. Sci. 2000, 176, 63
24. Aerts, P.; Genne, I.; Kuypers, S.; Leysen, R.; Vankelecomb, I. F. J.; Jacobs, P. A. Polysulfone-aerosil composite membranes. Part 2. The influence of the addition of aerosil on the skin characteristics and membrane properties J. Membr. Sci. 2000, 178, 1
25. 2 membranes J. Colloid Interface Sci. 2011, 363, 540
26. Sun, M. P.; Su, Y. L.; Mu, C. X.; Jiang, Z. Y. Improved antifouling property of PES ultrafiltration membranes using additive of silica-PVP nanocomposite Ind. Eng. Chem. Res. 2009, 49, 790
27. Bhadra, S.; Khastgir, D.; Singha, N. K.; Lee, J. H. Progress in preparation, processing and applications of polyaniline Prog. Polym. Sci. 2009, 34, 783
28. Zhao, S.; Wang, Z.; Wang, J. X.; Yang, S. B.; Wang, S. C. PSf/PANI nanocomposite membrane prepared by in situ blending of PSf and PANI/NMP J. Membr. Sci. 2011, 376, 83
29. Guillen, G. R.; Farrell, T. P.; Kaner, R. B.; Hoek, E. M. V. Pore-structure, hydrophilicity, and particle filtration characteristics of polyaniline-polysulfone ultrafiltration membranes J. Mater. Chem. 2010, 20, 4621
30. Naidua, B.; Sairam, M.; Raju, K.; Aminabhavi, T. Pervaporation separation of water plus isopropanol mixtures using novel nanocomposite membranes of poly(vinyl alcohol) and polyaniline J. Membr. Sci. 2005, 260, 142
31. Gupta, Y.; Hellgardt, K.; Wakeman, R. Enhanced permeability of polyaniline based nano-membranes for gas separation J. Membr. Sci. 2006, 282, 60
32. Amado, F.; Rodrigues, M.; Morisso, F.; Bernardes, A.; Ferreira, J.; Ferreira, C. High-impact polystyrene/polyaniline membranes for acid solution treatment by electrodialysis: Preparation, evaluation, and chemical calculation J. Colloid Interface Sci. 2008, 320, 52
33. Huang, J.; Virji, S.; Weiller, B.; Kaner, R. Polyaniline nanofibers: Facile synthesis and chemical sensors J. Am. Chem. Soc. 2003, 125, 314
34. Huang, J.; Kaner, R. A general chemical route to polyaniline nanofibers J. Am. Chem. Soc. 2004, 126, 851
35. Stejskal, J.; Sapurina, I. On the origin of colloidal particles in the dispersion polymerization of aniline J. Colloid Interface Sci. 2004, 274, 489
36. Ghosh, P.; Siddhanta, S.; Chakrabarti, A. Characterization of poly(vinyl pyrrolidone) modified polyaniline prepared in stable aqueous medium Eur. Polym. J. 1999, 35, 699
37. Stejskal, J.; Kratochvíl, P.; Helmstedt, M. Polyaniline dispersions. 5. Poly(vinyl alcohol) and poly(N -vinylpyrrolidone) as steric stabilizers Langmuir 1996, 12, 3389
38. Subramanian, E.; Anitha, G.; Vijayakumar, N. Constructive modification of conducting polyaniline characteristics in unusual proportion through nanomaterial blend formation with the neutral polymer poly(vinyl pyrrolidone) J. Appl. Polym. Sci. 2007, 106, 673
39. Zhao, S.; Wang, Z.; Wei, X.; Zhao, B. R.; Wang, J. X.; Yang, S. B.; Wang, S. C. Performance improvement of polysulfone ultrafiltration membrane using PANiEB as both pore forming agent and hydrophilic modifier J. Membr. Sci. 2011, 385-386, 251
40. Somani, P. Synthesis and characterization of polyaniline dispersions Mater. Chem. Phys. 2003, 77, 81
41. Cho, M.; Park, S.; Hwang, J.; Choi, H. Synthesis and electrical properties of polymer composites with polyaniline nanoparticles Mater. Sci. Eng. 2004, 24, 15
42. Guillen, G. R.; Pan, Y.; Li, M.; Hoek, E. M. V. Preparation and characterization of membranes formed by nonsolvent induced phase separation: A review Ind. Eng. Chem. Res. 2011, 50, 3798
43. Nair, R.; Nyamweya, N.; Gönen, S.; Martínez-Miranda, L. J.; Hoag, S. W. Influence of various drugs on the glass transition temperature of poly(vinylpyrrolidone): A thermodynamic and spectroscopic investigation Int. J. Pharm. 2001, 225, 83
44. Lafreniere, L. Y.; Talbot, F. D. F.; Matsuura, T.; Sourirajan, S. Effect of poly (vinylpyrrolidone) additive on the performance of poly (ether sulfone) ultrafiltration membranes Ind. Eng. Chem. Res. 1987, 26, 2385
45. Zhao, S.; Wang, Z.; Wei, X.; Tian, X. X.; Wang, J. X.; Yang, S. B.; Wang, S. C. Comparison study of the effect of PVP and PANI nanofibers additives on membrane formation mechanism, structure and performance J. Membr. Sci. 2011, 385-386, 110
46. Kim, J. H.; Lee, K. H. Effect of PEG additive on membrane formation by phase inversion J. Membr. Sci. 1998, 138, 153
47. Yang, Y.; Zheng, Q.; Chen, X.; Zhang, H. The research of rheology and thermodynamics of organic-inorganic hybrid membrane during the membrane formation J. Membr. Sci. 2008, 311, 200
48. Matsuyama, H.; Maki, T.; Teramoto, M.; Kobayashi, K. Effect of PVP additive on porous polysulfone membrane formation by immersion precipitation method Sep. Sci. Technol. 2003, 38, 3449
49. Yeo, H. T.; Lee, S. T.; Han, M. J. Role of a polymer additive in casting solution in preparation of phase inversion polysulfone membranes J. Chem. Eng. Jpn. 2000, 33, 180
50. Smolders, C.; Reuvers, A.; Boom, R.; Wienk, I. Microstructures in phase-inversion membranes. Part 1. Formation of macrovoids J. Membr. Sci. 1992, 73, 259
51. 2 nanoparticles J. Appl. Polym. Sci. 2007, 103, 3623
52. Liu, F.; Du, C.; Zhu, B.; Xu, Y. Surface immobilization of polymer brushes onto porous poly(vinylidene fluoride) membrane by electron beam to improve the hydrophilicity and fouling resistance Polymer 2007, 48, 2910
53. Brinkert, L.; Abidine, N.; Aptel, P. On the relation between compaction and mechanical properties for ultrafiltration hollow fibers J. Membr. Sci. 1993, 77, 123
54. Reinsch, V.; Greenberg, A.; Kelley, S.; Peterson, R.; Bond, L. A new technique for the simultaneous, real-time measurement of membrane compaction and performance during exposure to high-pressure gas J. Membr. Sci. 2000, 171, 217
55. Peterson, R. A.; Greenberg, A. R.; Bond, L. J.; Krantz, W. B. Use of ultrasonic TDR for real-time noninvasive measurement of compressive strain during membrane compaction Desalination 1998, 116, 115
56. Aerts, P.; Greenberg, A. R.; Leysen, R.; Krantz, W. B.; Reinsch, V. E.; Jacobs, P. A. The influence of filler concentration on the compaction and filtration properties of Zirfon-composite ultrafiltration membranes Sep. Purif. Technol. 2001, 22-23, 663
57. Chen, H. L.; Chen, Y. S.; Juang, R. S. Recovery of surfactin from fermentation broths by a hybrid salting-out and membrane filtration process Sep. Purif. Technol. 2008, 59, 244
58. Li, C. W.; Chen, Y. S. Fouling of UF membrane by humic substance: Effects of molecular weight and powder-activated carbon (PAC) pre-treatment Desalination 2004, 170, 59
59. Amin, I. N. H. M.; Mohammad, A. W.; Markom, M.; Peng, L. C.; Hilal, N. Flux decline study during ultrafiltration of glycerin-rich fatty acid solutions J. Membr. Sci. 2010, 351, 75