Comparison study of the effect of PVP and PANI nanofibers additives on membrane formation mechanism, structure and performance

Journal of Membrane Science

Volumn 385-386, Issue 1, 2011, Pages 110-122

  Zhao, Song ^a   Wang, Zhi ^a   Wei, Xin ^a   Tian, Xinxia ^a   Wang, Jixiao ^a   Yang, Shangbao ^a   Wang, Shichang ^a  

^a TIANJIN UNIVERSITY   (China)

Author keywords

Membrane formation; Membrane performance; Polyaniline nanofibers; Polysulfone; PVP

Indexed keywords

ADDITIVE CONTENTS; ANTIFOULING PROPERTY; BREAKING STRENGTH; CASTING FILMS; CASTING SOLUTIONS; CLOUD POINTS; COAGULATION BATH; COMPARISON STUDY; MASS VARIATIONS; MEMBRANE FORMATION; MEMBRANE PERFORMANCE; NANOCOMPOSITE MEMBRANES; NON-SOLVENTS; OPTICAL MICROSCOPY MEASUREMENTS; PHASE-SEPARATION PROCESS; POLYANILINE NANOFIBERS; POLYVINYL PYRROLIDONE; PROTEIN REJECTION; PURE WATER; PVP; RHEOLOGIC PROPERTY; SCANNING ELECTRON MICROSCOPE; STRUCTURE AND PERFORMANCE; TRANSMISSION MEASUREMENTS; ULTRAFILTRATION MEMBRANES; WATERSOLUBLE POLYMERS;

ADDITIVES; ANGLE MEASUREMENT; COAGULATION; CONTACT ANGLE; FLEXIBLE STRUCTURES; LIGHT TRANSMISSION; MECHANICAL PROPERTIES; NANOCOMPOSITES; NANOFIBERS; OPTICAL MICROSCOPY; PHASE SEPARATION; PHOTOELECTRON SPECTROSCOPY; POLYANILINE; SCANNING ELECTRON MICROSCOPY; STRUCTURAL PROPERTIES; ULTRAFILTRATION; VISCOSITY MEASUREMENT; X RAY PHOTOELECTRON SPECTROSCOPY;

MEMBRANES;

NANOFIBER; POLYANILINE; POVIDONE;

ARTICLE; COMPARATIVE STUDY; EVAPORATION; FLOW KINETICS; FOULING CONTROL; MEMBRANE FILTER; MEMBRANE STRUCTURE; MICROSCOPY; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPY; THERMODYNAMICS; TITRIMETRY; VISCOSITY; X RAY PHOTOELECTRON SPECTROSCOPY;

EID: 80755129083     PISSN: 03767388     EISSN: 18733123     Source Type: Journal    
DOI: 10.1016/j.memsci.2011.09.029     Document Type: Article

References (43)

1. Ghosh A.K., Hoek E.M.V. Impacts of support membrane structure and chemistry on polyamide-polysulfone interfacial composite membranes. J. Membr. Sci. 2009, 336:140-148.
2. Zheng Q.Z., Wang P., Yang Y.N. Rheological and thermodynamic variation in polysulfone solution by PEG introduction and its effect on kinetics of membrane formation via phase-inversion process. J. Membr. Sci. 2006, 279:230-237.
3. Menut P., Pochat-Bohatier C., Deratani A., Dupuy C., Guilbert S. Structure formation of poly (ether-imide) films using non-solvent vapor induced phase separation: relationship between mass transfer and relative humidity. Desalination 2002, 145:11-16.
4. Caquineau H., Menut P., Deratani A., Dupuy C. Influence of the relative humidity on film formation by vapor induced phase separation. Polym. Eng. Sci. 2003, 43:798-808.
5. Tsai H.A., Kuo C.Y., Lin J.H., Wang D.M., Deratani A., Pochat-Bohatier C., Lee K.R., Lai J.Y. Morphology control of polysulfone hollow fiber membranes via water vapor induced phase separation. J. Membr. Sci. 2006, 278:390-400.
6. Strathmann H., Kock K., Amar P., Baker R. The formation mechanism of asymmetric membranes. Desalination 1975, 16:179-203.
7. Reuvers A., Smolders C. Formation of membranes by means of immersion precipitation: Part II. the mechanism of formation of membranes prepared from the system cellulose acetate-acetone-water. J. Membr. Sci. 1987, 34:67-86.
8. Mulder M. Basic Principles of Membrane Technology 1996, Springer.
9. Li X., Chen C.X., Li J.D. Formation kinetics of polyethersulfone with cardo membrane via phase inversion. J. Membr. Sci. 2008, 314:206-211.
10. Qin P., Chen C., Yun Y., Chen Z., Shintani T., Li X., Li J., Sun B. Formation kinetics of a polyphthalazine ether sulfone ketone membrane via phase inversion. Presented at the international conference on integrated concepts on water recycling. Desalination 2006, 188:229-237.
11. Kim J.H., Lee K.H. Effect of PEG additive on membrane formation by phase inversion. J. Membr. Sci. 1998, 138:153-163.
12. Chakrabarty B., Ghoshal A.K., Purkait A.K. Preparation, characterization and performance studies of polysulfone membranes using PVP as an additive. J. Membr. Sci. 2008, 315:36-47.
13. Chakrabarty B., Ghoshal A.K., Purkait M.K. Effect of molecular weight of PEG on membrane morphology and transport properties. J. Membr. Sci. 2008, 309:209-221.
14. Chou W.L., Yu D.G., Yang M.C., Jou C.H. Effect of molecular weight and concentration of PEG additives on morphology and permeation performance of cellulose acetate hollow fibers. Sep. Purif. Technol. 2007, 57:209-219.
15. Tang B.B., Wu D., Xu T.W. Effect of PEG additives on properties and morphologies of membranes prepared from poly(2 6-dimethyl-1,4-phenylene oxide) by benzyl bromination and in situ amination. J. Appl. Polym. Sci. 2005, 98:2414-2421.
16. Wang P., Tan K.L., Kang E.T., Neoh K.G. Plasma-induced immobilization of poly(ethylene glycol) onto poly(vinylidene fluoride) microporous membrane. J. Membr. Sci. 2002, 195:103-114.
17. Han M.J., Nam S.T. Thermodynamic and rheological variation in polysulfone solution by PVP and its effect in the preparation of phase inversion membrane. J. Membr. Sci. 2002, 202:55-61.
18. Yeo H.T., Lee S.T., Han M.J. Role of a polymer additive in casting solution in preparation of phase inversion polysulfone membranes. J. Chem. Eng. Jpn. 2000, 33:180-184.
19. Fan Z.F., Wang Z., Sun N., Wang J.X., Wang S.C. Performance improvement of polysulfone ultrafiltration membrane by blending with polyaniline nanofibers. J. Membr. Sci. 2008, 320:363-371.
20. Yang Y., Zheng Q., Chen X., Zhang H. The research of rheology and thermodynamics of organic-inorganic hybrid membrane during the membrane formation. J. Membr. Sci. 2008, 311:200-207.
21. 2 nanoparticles on fouling mitigation of ultrafiltration membranes for activated sludge filtration. J. Membr. Sci. 2005, 249:1-8.
22. Zou H., Wu S.S., Shen J. Polymer/silica nanocomposites: preparation, characterization, properties, and applications. Chem. Rev. 2008, 108:3893-3957.
23. Qiu S., Wu L.G., Pan X.J., Zhang L., Chen H.L., Gao C.J. Preparation and properties of functionalized carbon nanotube/PSF blend ultrafiltration membranes. J. Membr. Sci. 2009, 342:165-172.
24. Guillen G.R., Farrell T.P., Kaner R.B., Hoek E.M.V. Pore-structure, hydrophilicity, and particle filtration characteristics of polyaniline-polysulfone ultrafiltration membranes. J. Mater. Chem. 2010, 20:4621-4628.
25. Huang J., Kaner R.B. Nanofiber formation in the chemical polymerization of aniline: a mechanistic study. Angew. Chem. 2004, 116:5941-5945.
26. Fan Z.F., Wang Z., Duan M.R., Wang J.X., Wang S.C. Preparation and characterization of polyaniline/polysulfone nanocomposite ultrafiltration membrane. J. Membr. Sci. 2008, 310:402-408.
27. Han M., Bhattacharyya D. Changes in morphology and transport characteristics of polysulfone membranes prepared by different demixing conditions. J. Membr. Sci. 1995, 98:191-200.
28. Stropnik C., Musil V., Brumen M. Polymeric membrane formation by wet-phase separation; turbidity and shrinkage phenomena as evidence for the elementary processes. Polymer 2000, 41:9227-9237.
29. Sossna M., Hollas M., Schaper J., Scheper T. Structural development of asymmetric cellulose acetate microfiltration membranes prepared by a single-layer dry-casting method. J. Membr. Sci. 2007, 289:7-14.
30. Li G., Li B. First successful post-synthetic self-assembly of polyaniline with poly(N-vinylpyrrolidone) into aqueous nanocolloids. Macromol. Rapid Commun. 2006, 27:854-858.
31. Kim I.C., Yoon H.G., Lee K.H. Formation of integrally skinned asymmetric polyetherimide nanofiltration membranes by phase inversion process. J. Appl. Polym. Sci. 2002, 84:1300-1307.
32. Guillen G.R., Pan Y., Li M., Hoek E.M.V. Preparation and characterization of membranes formed by nonsolvent induced phase separation: a review. Ind. Eng. Chem. Res. 2011, 50:3798-3817.
33. Nair R., Nyamweya N., Gönen S., Martínez-Miranda L.J., Hoag S.W. Influence of various drugs on the glass transition temperature of poly(vinylpyrrolidone): a thermodynamic and spectroscopic investigation. Int. J. Pharm. 2001, 225:83-96.
34. Strathmann H. Production of Microporous Media by Phase Inversion Processes 1985, ACS Publications, p. 165.
35. Van de Witte P., Dijkstra P., Van den Berg J., Feijen J. Phase separation processes in polymer solutions in relation to membrane formation. J. Membr. Sci. 1996, 117:1-31.
36. Kajiyama T., Tanaka K., Takahara A. Surface segregation of the higher surface free energy component in symmetric polymer blend films. Macromolecules 1998, 31:3746-3749.
37. Zhu L., Xu L., Zhu B., Feng Y., Xu Y. Preparation and characterization of improved fouling-resistant PPESK ultrafiltration membranes with amphiphilic PPESK-graft-PEG copolymers as additives. J. Membr. Sci. 2007, 294:196-206.
38. Jung B., Yoon J., Kim B., Rhee H. Effect of molecular weight of polymeric additives on formation, permeation properties and hypochlorite treatment of asymmetric polyacrylonitrile membranes. J. Membr. Sci. 2004, 243:45-57.
39. Susanto H., Ulbricht M. Characteristics, performance and stability of polyethersulfone ultrafiltration membranes prepared by phase separation method using different macromolecular additives. J. Membr. Sci. 2009, 327:125-135.
40. Li C.W., Chen Y.S. Fouling of UF membrane by humic substance: effects of molecular weight and powder-activated carbon (PAC) pre-treatment. Desalination 2004, 170:59-67.
41. Yoo S., Kim J., Jho J., Won J., Kang Y. Influence of the addition of PVP on the morphology of asymmetric polyimide phase inversion membranes: effect of PVP molecular weight. J. Membr. Sci. 2004, 236:203-207.
42. Yang G., Zhang L. Regenerated cellulose microporous membranes by mixing cellulose cuoxam with a water soluble polymer. J. Membr. Sci. 1996, 114:149-155.
43. 2 fillers on the morphologies and properties of PSF UF membrane. J. Membr. Sci. 2007, 288:231-238.