Effect of fillers on morphological and wear characteristics of NR/HSR blends with E-glass fiber

Materials and Design

Volumn 35, Issue , 2012, Pages 863-872

  Pal, Kaushik ^a,b   Pal, Samir K ^b   Das, Chapal K ^b   Kim, Jin Kuk ^a  

^a Gyeongsang National University   (South Korea)

^b INDIAN INSTITUTE OF TECHNOLOGY   (India)

Author keywords

Abrasion; Elastomers and rubber; Thermoplastics

Indexed keywords

ABRASION RESISTANT; BACKBONE STRUCTURES; BLENDING TECHNIQUES; CARBON BLACK REINFORCEMENT; CURE RATE INDEX; CURE TIME; DSC CURVES; E-GLASS FIBERS; MELTING PEAK; ROCK SURFACES; STYRENE RUBBERS; WEAR CHARACTERISTICS;

ABRASION; BLENDING; CARBON BLACK; CURING; DEGRADATION; FILLERS; GLASS FIBERS; MECHANICAL PROPERTIES; STYRENE; THERMOPLASTICS;

RUBBER;

EID: 84858342347     PISSN: 02641275     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2011.07.074     Document Type: Article

References (57)

1. Gunasekaran S., Natarajan R.K., Kala A. FTIR spectra and mechanical strength analysis of some selected rubber derivatives. Spectrochim Acta Part A 2007, 68:323-330.
2. Fernandez-Berridi M.J., Gonzalez N., Mugica A., Bernicot C. Pyrolysis-FTIR and TGA techniques as tools in the characterization of blends of natural rubber and SBR. Thermochim Acta 2006, 444:65-70.
3. Tinker AJ, Jones KP. Blends of natural rubber, novel techniques for blending with speciality polymers. London: Chapman and Hall; 1998. ISBN 0-412-81940-6.
4. Choi S.-S., Nah C., Lee S.G., Joo C.W. Effect of filler-filler interaction on rheological behaviour of natural rubber compounds filled with both carbon black and silica. Polym Int 2003, 52(1):23-28.
5. Heinrich G., Kluppel M., Vilgis T.A. Reinforcement of elastomers. Curr Opin Solid State Mater Sci 2002, 6(3):195-203.
6. Naskar N., Debnath S.C., Basu D.K. Novel method for preparation of carboxylated nitrile rubber-natural rubber blends using bis(diisopropyl)thiophosphoryl polysulfides. J Appl Polym Sci 2001, 80(10):1725-1736.
7. Nasir M., Choo C.H. Chemical modification of natural rubber latex with peracetic acid. Polym J 1989, 25(4):355-359.
8. Brinke J.W.T., Debnath S.C., Reuvekamp L.A.E.M., Noordermeer J.W.M. Mechanistic aspects of the role of coupling agents in silica-rubber composites. Compos Sci Technol 2003, 63(8):1165-1174.
9. Arroyo M., Lopez-Manchadoa M.A., Valentina J.L., Carretero J. Morphology/behaviour relationship of nanocomposites based on natural rubber/epoxidized natural rubber blends. Compos Sci Technol 2007, 67(7-8):1330-1339.
10. Ratner S.B., Gool V.E., Klitenik G.S. On the abrasion of vulcanized rubber against wire gauze. Wear 1958, 2(2):127.
11. Ratner S.B. The abrasion index of rubber and its connection with the coefficient of friction. Dokl Akad Nauk SSSR 1952, 87(5):743-746.
12. Ratner S.B., Sokolskaya V.D. Effect of rubber fillers on the coefficient of static friction. Dokl Akad Nauk SSSR 1952, 86(1):121-124.
13. Ratner S.B., Farberova I.I. Mechanical testing of plastics-wear. Sov Plast 1960, 51(9):297.
14. Schallamach A. In: Bateman L, editor Chemistry and physics of rubber-like substances, vol. 3. London: Maclaren; 1963. p. 382.
15. Grosch K.A., Schallamach A. Tire friction on wet roads. Rubber Chem Technol 1976, 49(3):862-909.
16. Champ H., Southern E., Thomas A.G. Advances in polymer friction and wear 1974, 133. Plenum, New York and London. L.H. Lee (Ed.).
17. Thomas A.G. Factors influencing the strength of rubbers. J Polym Sci, Polym Symp 1974, 48:145-157.
18. Kragelskii IV, Nepomnyashchil EF. Abrasion of rubber. London: Publ. Maclern and Sons Ltd.; 1967. p. 3-13.
19. Schallamach A. A theory of dynamic rubber friction. Wear 1963, 6(5):375.
20. Nayek S., Bhowmick A.K., Pal S.K., Chandra A.K. Wear behavior of silica filled tire tread compounds by various rock surfaces. Rubber Chem Technol 2005, 78(4):705-722.
21. Pal K., Pal S.K., Das C.K., Kim J.K. Influence of fillers on NR/SBR/XNBR blends. Morphology and wear. Tribol Int 2010, 43(8):1542-1550.
22. Pal K., Rajasekar R., Kang D.J., Zhang Z.X., Pal S.K., Kim J.K., et al. Influence of carbon blacks on butadiene rubber/high styrene rubber/natural rubber with nanosilica: morphology and wear. Mater Design 2010, 31(3):1156-1164.
23. Pal K. Speciality elastomer blends for abrasion resistant tyre tread of dump-trucks. Ph. D thesis. Kharagpur, India: Indian Institute of Technology; 2009.
24. Bhowmick A. Ridge formation during the abrasion of elastomers. Rubber Chem Technol 1979, 55(4):1055-1063.
25. Southern E., Thomas A. Studies of rubber abrasion. Rubber Chem Technol 1979, 52(5):1008-1018.
26. Medalia A.I., Alesi A.I., Mead J.L. Pattern abrasion and other mechanisms of wear of tank track pads. Rubber Chem Technol 1992, 65(1):259-275.
27. Viswanath N., Bellow D.G. Development of an equation for the wear of polymers. Wear 1995, 181-183(1):42-49.
28. Rymuza Z. Wear in polymer micro-pairs. In: Proc. 3rd. int conf on wear of materials; 1981. p. 125-32.
29. Ratner S.B. Connection between the wear resistance of plastics and other mechanical properties. Sov Plast 1964, 7:37.
30. Lewis R.B. Predicting the wear of sliding plastic surfaces. Mech Eng 1964, 86:32-35.
31. Rhee S.K. Wear equation for polymers sliding against metal surfaces. Wear 1970, 16(6):431-445.
32. Lancaster J.K. Friction and wear. Polymer sciences 1972, 14. North-Holland Publishing Co, Amsterdam. A.D. Jenkins (Ed.).
33. Atkinson J.R., Brown K.J., Dawson D. The wear of high molecular weight polyethylene-Part I: the wear of isotropic polyethylene against dry stainless steel in unidirectional motion. Trans ASME J Lubr Technol 1978, 100(2):208-218.
34. Schallmach A. Abrasion pattern on rubber. Rubber Chem Technol 1953, 26(1):230-241.
35. Kragelsky I.V., Nepomyashic Y.F. Friction wear of polymers. Khimiya 1964, 5-9.
36. Klitenik G.S., Ratner S.B. Friction wear of polymers. Khimiya 1964, 77.
37. Brodsky G.I. Comprehensive evaluation of cord-to-rubber adhesion. Rubber World 1984, 190(5):29-39.
38. Brodsky G.I., Reznikovsky M.M., Sizikov N.N. Rezina konstruktsionnyi material sovremennogo machinostroeniya. Khimiya 1967, 118.
39. Pal K., Rajasekar R., Kang D.J., Zhang Z.X., Pal S.K., Kim J.K., et al. Effect of fillers and nitrile blended PVC on natural rubber/high styrene rubber with nanosilica blends: morphology and wear. Mater Design 2010, 31(1):25-34.
40. Rudakov A., Kuvshinskii E. The mechanism of abrasion of vulcanized rubber. Rubber Chem Technol 1964, 37:291-296.
41. Pal K., Das T., Rajasekar R., Pal S.K., Das C.K. Wear characteristics of styrene butadiene rubber/natural rubber blends with varying carbon blacks by DIN abrader and mining rock surfaces. J Appl Polym Sci 2009, 111(1):348-357.
42. Pal K., Rajasekar R., Kang D.J., Zhang Z.X., Pal S.K., Kim J.K., et al. Effect of fillers on natural rubber/high styrene rubber blends with nano silica: morphology and wear. Mater Design 2010, 31(2):677-686.
43. Sezna JA, Pawlowski HA, DeConinck D. New test results from rotorless curemeters. In: Proceeding of 136th meeting of the ACS-rubber division. Fall; 1989.
44. Miyata T., Inaki K., Morikawa J., Satoto R., Hashimoto T. Effects of copolyester/polycarbonate blend composition on the thermal diffusivity of dye transfer printing. J Appl Polym Sci 2004, 92(1):72-76.
45. Paul D.R., Newman S. Polymer blends, vol. 1 1978, Academic Press, New York.
46. Kader M.A., Bhowmick A.K. Thermal ageing, degradation and swelling of acrylate rubber, fluororubber and their blends containing polyfunctional acrylates. Polym Degrad Stabil 2003, 79(2):283-295.
47. Smith L.P. The language of rubber 1993, Butterworth Heinemann, London.
48. Othman A.B. Property profile of a laminated rubber bearing. Polym Test 2001, 20(2):159-166.
49. Pal K., Rajasekar R., Kang D.J., Zhang Z.X., Kim J.K., Das C.K. Effect of epoxidized natural rubber-organoclay nanocomposites on NR/high styrene rubber blends with fillers. Mater Design 2009, 30(10):4035-4042.
50. Pal K, Rajasekar R, Kang DJ, Zhang ZX, Das CK, Kim JK. Effect of filler and urethane rubber on NR/BR with nanosilica: morphology and wear. J Thermoplast Compos Mater; 2010. doi: 10.1177/0892705709355234.
51. Bayraktar E., Isac N., Bessri K., Bathias C. Damage mechanisms in natural (NR) and synthetic rubber (SBR): nucleation, growth and instability of the cavitation. Fatigue Fract Eng Mater Struct 2008, 31(2):184-196.
52. Busse W.F. Physics of rubber as related to the automobile. J Appl Phys 1938, 9:438-451.
53. Yerzley F.L. Adhesion of neoprene to metal. Ind Eng Chem 1939, 31:950-956.
54. Gent A.N., Lindley P.B. Internal rupture of bonded rubber cylinders in tension. Proc R Soc 1958, A249:195-205.
55. Gent A.N., Park B. Failure processes in elastomers at or near a rigid spherical inclusion. J Mater Sci 1984, 19(6):1947-1956.
56. Zhang S.W. State-of-the-art of polymer tribology. Tribol Int 1998, 31(1-3):49-60.
57. Ettles C.M.M.C., Shen J.H. The influence of frictional heating on the sliding friction of elastomers and polymers. Rubber Chem Technol 1988, 61(1):119-136.