Influence of fillers on NR/SBR/XNBR blends. Morphology and wear

Tribology International

Volumn 43, Issue 8, 2010, Pages 1542-1550

  Pal, Kaushik ^a,b   Pal, Samir K ^b   Das, Chapal K ^b   Kim, Jin Kuk ^a  

^a Gyeongsang National University   (South Korea)

^b INDIAN INSTITUTE OF TECHNOLOGY   (India)

Author keywords

Composites; Elastomer; Rock; Wear

Indexed keywords

ABRASION RESISTANT; CARBOXYLATED ACRYLONITRILE-BUTADIENE RUBBER; COMPOSITES; MATRIX; NATURAL RUBBERS; ROCK SURFACES; STYRENE BUTADIENE RUBBER; WEAR CHARACTERISTICS;

ABRASION; BUTADIENE; CARBON BLACK; FILLERS; MECHANICAL PROPERTIES; ROCKS; STYRENE;

RUBBER;

EID: 77953289328     PISSN: 0301679X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.triboint.2010.02.015     Document Type: Article

References (59)

1. Gunasekaran S., Natarajan R.K., and Kala A. FTIR spectra and mechanical strength analysis of some selected rubber derivatives. Spectrochim. Acta Part A 68 (2007) 323-330
2. Fernandez-Berridi M.J., Gonzalez N., Mugica A., and Bernicot C. Pyrolysis-FTIR and TGA techniques as tools in the characterization of blends of natural rubber and SBR. Thermochim. Acta 444 (2006) 65-70
3. Tinker A.J., and Jones K.P. Blends of Natural Rubber, Novel techniques for Blending with Speciality Polymers (1998), Chapman & Hall, London ISBN 0-412-81940-6
4. Choi S.-S., Nah C., Lee S.G., and Joo C.W. Effect of filler-filler interaction on rheological behaviour of natural rubber compounds filled with both carbon black and silica. Polym. Int. 52 1 (2003) 23-28
5. Heinrich G., Kluppel M., and Vilgis T.A. Reinforcement of elastomers. Curr. Opin. Solid State Mater. Sci. 6 3 (2002) 195-203
6. Naskar N., Debnath S.C., and Basu D.K. Novel method for preparation of carboxylated nitrile rubber-natural rubber blends using bis(diisopropyl)thiophosphoryl polysulfides. J. Appl. Polym. Sci. 80 10 (2001) 1725-1736
7. Nasir M., and Choo C.H. Chemical modification of natural rubber latex with peracetic acid. Polym. J. 25 4 (1989) 355-359
8. Brinke J.W.T., Debnath S.C., Reuvekamp L.A.E.M., and Noordermeer J.W.M. Mechanistic aspects of the role of coupling agents in silica-rubber composites. Compos. Sci. Technol. 63 8 (2003) 1165-1174
9. Arroyo M., Lopez-Manchadoa M.A., Valentina J.L., and Carretero J. Morphology/behaviour relationship of nanocomposites based on natural rubber/epoxidized natural rubber blends. Compos. Sci. Technol. 67 7-8 (2007) 1330-1339
10. Ratner SB, Klitenik GS, Melnikova MV. Transactions of 3rd all-union conference on friction and wear, Public Academy of Sciences, USSR, 1960.
11. Ratner S.B. Dokl. Akad. Nauk SSSR 87 5 (1952) 743-746
12. Sakhnovski N.L., Ivonova S.A., Melnikova M.V., and Ratner S.B. Kauch. I. Rezina 17 10 (1958) 10-18
13. Ratner S.B., and Farberova I.I. Mechanical testing of plastics-wear. Sov. Plast. 51 9 (1960) 297
14. Schallamach A. In: Bateman L. (Ed). Chemistry and Physics of Rubber-like Substances (1963), Maclaren, London 382
15. Grosch K.A., and Schallamach A. Tire friction on wet roads. Rubber Chem. Technol. 49 3 (1976) 862-909
16. Champ H., Southern E., and Thomas A.G. Am. Chem. Soc., Div. Org. Coat. Plast. Paper Prepr. 34 1 (1974) 237
17. Thomas A.G. Factors influencing the strength of rubbers. J. Polym. Sci., Polym. Symp. 48 (1974) 145-157
18. Kragelskii I.V., and Nepomnyashchil E.F. Abrasion of Rubber (1967), Publ. Maclern and Sons Ltd., London 3-13
19. Schallamach A., and Khin I. Tekhnol. Polym. 45 (1959) 4
20. Nayek S., Bhowmick A.K., Pal S.K., and Chandra A.K. Wear behavior of silica filled tire tread compounds by various rock surfaces. Rubber Chem. Technol. 78 4 (2005) 705-722
21. Kragelskii I.V., and Nepomnyashchil E.F. Abrasion of Rubber (1967), Publ. Maclern and Sons Ltd., London p. 3
22. Reznikovskii R., and Warlow-Davies E. Proc. Phys. Soc. 54 14 (1942) 301
23. Pal K. Speciality elastomer blends for abrasion resistant tyre tread of dump-trucks, Ph.D. thesis, Indian Institute of Technology, Kharagpur, India, 2009.
24. Bhowmick A. Ridge formation during the abrasion of elastomers. Rubber Chem. Technol. 55 4 (1979) 1055-1063
25. Southern E., and Thomas A. Studies of rubber abrasion. Rubber Chem. Technol. 52 5 (1979) 1008-1018
26. Medalia AI, Alesi AI, Mead JL, Simonean R. Paper no. 34, Rubber Division, A.C.S., Cincinnati, Ohio, October, 18-21, 1988; abstract in Rubber Chem. Technol. 1989;62:165.
27. Viswanath N., and Bellow D.G. Development of an equation for the wear of polymers. Wear 181-183 1 (1995) 42-49
28. Rymuza Z. Wear in polymer micro-pairs, In: Proceedings of the third international conference on wear of materials 1981;125-32.
29. Ratner S.B. Connection between the wear resistance of plastics and other mechanical properties. Sov. Plast. 7 (1964) 37
30. Lewis R.B. Predicting the wear of sliding plastic surfaces. Mech. Eng. 86 (1964) 32-35
31. Rhee S.K. Wear equation for polymers sliding against metal surfaces. Wear 16 6 (1970) 431-445
32. Lancaster J.K. Friction and wear. In: Jenkins A.D. (Ed). Polymer Sciences Vol. 14 (1972), North-Holland Publishing Co., Amsterdam
33. Atkinson JR., Brown KJ, Dawson D. The wear of high molecular weight polyethylene, Pt. I. Isotropic polyethylene against dry stainless steel in unidirectional motion, Trans ASME.
34. Schallmach A. Abrasion pattern on rubber. Rubber Chem. Technol. 26 1 (1953) 230-241
35. Kragelsky I.V., and Nepomyashic Y.F. Friction wear of polymers. Khimiya (1964) 5-9
36. Ratner S.B., and Melnikova M.V. Kauch. I. Rezina 15 8 (1958)
37. Reznikovskii M.M., and Brodskii G.I. Sov. Rubber Technol. 20 7 (1961) 13
38. Savkoor AR. Some aspects of friction and wear of tyres arising from deformations, slip and stresses at the ground contact. Wear 1961;9(1):66-78.
39. Reznikovskii M.M. In: James D.I. (Ed). Abrasion of Rubber (1967), Maclaren, London 41
40. Rudakov A., and Kuvshinskii E. The mechanism of abrasion of vulcanized rubber. Rubber Chem. Technol. 37 (1964) 291-296
41. Pal K., Das T., Rajasekar R., Pal S.K., and Das C.K. Wear characteristics of styrene butadiene rubber/natural rubber blends with varying carbon blacks by DIN abrader and mining rock surfaces. J. Appl. Polym. Sci. 111 1 (2009) 348-357
42. Manik S.P., and Banerjee S. Determination of chemical cross-links in rubbers. Die Angew. Makromolekuiare Chem. 6 Nr. 71 (1979) 171-178
43. Sezna JA, Pawlowski HA, DeConinck D. New test results from rotorless curemeters, Proceeding of 136th meeting of the ACS-rubber division, Fall 1989.
44. Rajasekar R, Pal K, Heinrich G, Das A, Das CK. Development of NBR-nanoclay composites with epoxidized natural rubber as compatibilizer. Mater. Des. 2009; doi:10.1016/j.matdes.2009.03.014.
45. Padella F., Cavalieri F., D'Uva G., La Barbera A., and Cataldo F. Recycling of scrap tires rubber by mechanochemical devulcanization. Polym. Recycling 6 1 (2001) 11-16
46. Pal K., Rajasekar R., Das T., Kang D.J., Pal S.K., Kim J.K., et al. Effect of fillers on morphological properties in NR/SBR blends for OTR tyres. Plast., Rubber and Compos. 38 7 (2009) 302-308
47. Pal K., Rajasekar R., Kang D.J., Zhang Z.X., Pal S.K., Kim J.K., et al. Effect of fillers on natural rubber/high styrene rubber blends with nano silica: morphology and wear. Mater. Des. 31 2 (2010) 677-686
48. Agag T., Koga T., and Takeichi T. Studies on thermal and mechanical properties of polyimide-clay nanocomposites. Polymer 42 8 (2001) 3399-3408
49. Nielsen L.E. Mechanical properties of polymers and composites (1974), Marcel Dekker, New York p. 2
50. Sharifa J., Yunus W.M.Z.W., Dahlan K.Z.H.M., and Ahmad M.H. Preparation and properties of radiation crosslinked natural rubber/clay nanocomposites. Polym. Test. 24 2 (2005) 211-217
51. Miyata T., Inaki K., Morikawa J., Satoto R., and Hashimoto T. Effects of copolyester/polycarbonate blend composition on the thermal diffusivity of dye transfer printing. J. Appl. Polym. Sci. 92 1 (2004) 72-76
52. Paul D.R., and Newman S. Polymer blends Vol. 1 (1978), Academic Press, New York
53. Maity M., Khatua B.B., and Das C.K. Effect of processing on the thermal stability of the blends based on polyurethane: part IV. Polym. Degrad. Stab. 72 3 (2000) 499-503
54. Gann RG, Dipert RA, Drews MJ. 'Flammability'. In: Kroschwitz JI, editor. Encyclopedia of polymer science and engineering. 2nd ed., Vol. 7, John Wiley & Sons, Inc., New York; 1985. p. 154.
55. Medalia A.I. Heat generation in elastomer compounds: causes and effects. Rubber Chem. Technol. 64 3 (1991) 481-492
56. Park D.M., Hong W.H., Kim S.G., and Kim H.J. Heat generation of filled rubber vulcanizates and its relationship with vulcanizate network structures. Euro. Polym. J. 36 11 (2000) 2429-2436
57. Pal K., Das T., Pal S.K., and Das C.K. Use of carboxylated nitrile rubber and natural rubber blends as retreading compound for OTR tires. Polym. Eng. Sci. 48 12 (2008) 2410-2417
58. Zhang S.W. State-of-the-art of polymer tribology. Tribol. Int. 31 1-3 (1998) 49-60
59. Ettles C.M.M.C., and Shen J.H. The influence of frictional heating on the sliding friction of elastomers and polymers. Rubber Chem. Technol. 61 1 (1988) 119-136