Effect of fillers and nitrile blended PVC on natural rubber/high styrene rubber with nanosilica blends: Morphology and wear

Materials and Design

Volumn 31, Issue 1, 2010, Pages 25-34

  Pal, Kaushik ^a,b   Rajasekar, R ^b   Kang, Dong Jin ^a   Zhang, Zhen Xiu ^a   Pal, Samir K ^b   Kim, Jin Kuk ^a   Das, Chapal K ^b  

^a Gyeongsang National University   (South Korea)

^b INDIAN INSTITUTE OF TECHNOLOGY   (India)

Author keywords

Abrasion; Elastomers and rubber; Mechanical

Indexed keywords

ABRASION RESISTANT; BACKBONE STRUCTURES; BLENDING TECHNIQUES; CARBON BLACK REINFORCEMENT; COMPRESSION SET; CURE RATE INDEX; CURE TIME; DSC CURVES; HEAT BUILDUP; MATRIX; MECHANICAL; MELTING PEAK; NANO-SILICA; NATURAL RUBBERS; ROCK SURFACES; RUBBER BLENDS; STYRENE RUBBERS; WEAR CHARACTERISTICS;

ABRASION; BLENDING; CURING; CYANIDES; ELASTOMERS; FILLERS; MECHANICAL PROPERTIES; MINING; RAILROAD ENGINEERING; REINFORCEMENT; RUBBER; STYRENE; TRIBOLOGY;

CARBON BLACK;

EID: 69649086387     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2009.07.023     Document Type: Article

References (66)

1. Brinke J.W.T., Debnath S.C., Reuvekamp L.A.E.M., and Noordermeer J.W.M. Mechanistic aspects of the role of coupling agents in silica-rubber composites. Compos Sci Technol 63 8 (2003) 1165-1174
2. Arroyo M., Lopez-Manchadoa M.A., Valentina J.L., and Carretero J. Morphology/behaviour relationship of nanocomposites based on natural rubber/epoxidized natural rubber blends. Compos Sci Technol 67 7-8 (2007) 1330-1339
3. Ratner SB, Klitenik GS, Melnikova MV. In: Trans. 3rd all-union conf. on friction and wear. Publ. Academy of Sciences USSR; 1960.
4. Ratner S.B. Dok Akad Nauk SSSR 87 5 (1952) 743-746
5. Sakhnovski N.L., Ivonova S.A., Melnikova M.V., and Ratner S.B. Kauch I Rezina 17 10 (1958) 10-18
6. Ratner S.B. Farberova II. Mechanical testing of plastics-wear. Soviet Plast 51 9 (1960) 297
7. Schallamach A. In: Bateman L. (Ed). Chemistry and physics of rubber-like substances vol. 3 (1963), Maclaren, London 382
8. Grosch K.A., and Schallamach A. Tire friction on wet roads. Rubber Chem Technol 49 3 (1976) 862-909
9. Champ H., Southern E., and Thomas A.G. Am Chem Soc, Div Org Coat Plast Paper Prepr 34 1 (1974) 237
10. Thomas A.G. Factors influencing the strength of rubbers. J Polym Sci, Polym Symp 48 (1974) 145-157
11. Kragelskii I.V., and Nepomnyashchil E.F. Abrasion of rubber (1967), Publ. Maclern and Sons Ltd., London 3-13
12. Schallamach A. Khin I Tekhnol Polym (1959) 4
13. Nayek S., Bhowmick A.K., Pal S.K., and Chandra A.K. Wear behavior of silica filled tire tread compounds by various rock surfaces. Rubber Chem Technol 78 4 (2005) 705-722
14. Reznikovskii R., and Warlow-Davies E. Proc Phys Soc 54 14 (1942) 301
15. Pal K. Speciality Elastomer blends for abrasion resistant tyre tread of dump-trucks, Ph.D. Thesis, Indian Institute of Technology, Kharagpur, India; 2009.
16. Bhowmick A. Ridge formation during the abrasion of elastomers. Rubber Chem Technol 55 4 (1979) 1055-1063
17. Southern E., and Thomas A. Studies of rubber abrasion. Rubber Chem Technol 52 5 (1979) 1008-1018
18. Medalia AI, Alesi AI, Mead JL, Simonean R. Paper No. 34, Rubber Division, A. C. S., Cincinnati, OH, October, 18-21, 1988; abstract in Rubber Chem Technol 1989;62:165.
19. Viswanath N., and Bellow D.G. Development of an equation for the wear of polymers. Wear 181-183 1 (1995) 42-49
20. Rymuza Z. Wear in polymer micro-pairs. In: Proc. 3rd. int. conf. on wear of mater; 1981. p. 125-132.
21. Ratner S.B. Connection between the wear resistance of plastics and other mechanical properties. Soviet Plast 7 (1964) 37
22. Lewis R.B. Predicting the wear of sliding plastic surfaces. Mech Eng 86 (1964) 32-35
23. Rhee S.K. Wear equation for polymers sliding against metal surfaces. Wear 16 6 (1970) 431-445
24. Lancaster J.K. Friction and wear. In: Jenkins A.D. (Ed). Polymer sciences vol. 14 (1972), North-Holland Publishing Co., Amsterdam
25. Atkinson J.R., Brown K.J., and Dowson D. The wear of high molecular weight polyethylene-Part I: the wear of isotropic polyethylene against dry stainless steel in unidirectional motion. Trans ASME J Lubr Technol 100 2 (1978) 208-218
26. Schallmach A. Abrasion pattern on rubber. Rubber Chem Technol 26 1 (1953) 230-241
27. Kragelsky I.V., and Nepomyashic Y.F. Friction wear of polymers. Khimiya (1964) 5-9
28. Ratner S.B., and Melnikova M.V. Kauch I Rezina 15 8 (1958)
29. Reznikovskii M.M., and Brodskii G.I. Soviet Rubber Technol 20 7 (1961) 13
30. Reznikovskii MM, Brodskii GI. In: Proc. fourth rubber technology, conf., May, IRI London, vol. 413; 1961.
31. Reznikovskii M.M. In: James D.I. (Ed). Abrasion of rubber (1967), Maclaren, London 41
32. Rudakov A., and Kuvshinskii E. The mechanism of abrasion of vulcanized rubber. Rubber Chem Technol 37 (1964) 291-296
33. Gunasekaran S., Natarajan R.K., and Kala A. FTIR spectra and mechanical strength analysis of some selected rubber derivatives. Spectrochim Acta Part A 68 (2007) 323-330
34. Fernandez-Berridi M.J., Gonzalez N., Mugica A., and Bernicot C. Pyrolysis-FTIR and TGA techniques as tools in the characterization of blends of natural rubber and SBR. Thermochim Acta 444 (2006) 65-70
35. Tinker A.J., and Jones K.P. Blends of Natural Rubber Novel techniques for blending with speciality polymers (1998), Chapman & Hall, London ISBN 0-412-81940-6
36. Choi S.-S., Nah C., Lee S.G., and Joo C.W. Effect of filler-filler interaction on rheological behaviour of natural rubber compounds filled with both carbon black and silica. Polym Int 52 1 (2003) 23-28
37. Heinrich G., Kluppel M., and Vilgis T.A. Reinforcement of elastomers. Curr Opin Solid State Mater Sci 6 3 (2002) 195-203
38. Naskar N., Debnath S.C., and Basu D.K. Novel method for preparation of carboxylated nitrile rubber-natural rubber blends using bis(diisopropyl)thiophosphoryl polysulfides. J Appl Polym Sci 80 10 (2001) 1725-1736
39. Nasir M., and Choo C.H. Chemical modification of natural rubber latex with peracetic acid. Polym J 25 4 (1989) 355-359
40. Pal K., Das T., Rajasekar R., Pal S.K., and Das C.K. Wear characteristics of styrene butadiene rubber/natural rubber blends with varying carbon blacks by DIN abrader and mining rock surfaces. J Appl Polym Sci 111 1 (2009) 348-357
41. Manik S.P., and Banerjee S. Determination of chemical cross-links in rubbers. Die Angew Makromol Chem 6 71 (1979) 171-178
42. Teh P.L., Mohd Ishak Z.A., Hashim A.S., Karger-Kocsis J., and Ishiaku U.S. Effects of epoxidized natural rubber as a compatibilizer in melt compounded natural rubber-organoclay nanocomposites. Eur Polym J 40 11 (2004) 2513-2521
43. Sezna JA, Pawlowski HA, DeConinck D. In: Proceeding of 136th meeting of the ACS-Rubber Division, Fall; 1989.
44. Yehia A.A., Ismail M.N., Hefny Y.A., Abdel-Bary E.M., and Mull M.A. Mechano-chemical reclamation of waste rubber powder and its effect on the performance of NR and SBR vulcanizates. J Elastom Plast 36 2 (2004) 109-123
45. Zhu L., and Wool R.P. Nanoclay reinforced bio-based elastomers: synthesis and characterization. Polym sci 47 24 (2006) 8106-8115
46. De D., Maiti S., and Adhikary B. Reclaiming of rubber by a renewable resource material (RRM). III. Evaluation of properties of NR reclaim. J Appl Polym Sci 75 12 (2000) 1493-1502
47. Rajasekar R., Pal K., Heinrich G., Das A., and Das C.K. Development of NBR-nanoclay composites with epoxidized natural rubber as compatibilizer. Mater Des 30 9 (2009) 3839-3845
48. Padella F., Cavalieri F., D'Uva G., La Barbera A., and Cataldo F. Recycling of scrap tires rubber by mechanochemical devulcanization. Polym Recycl 6 1 (2001) 11-16
49. Agag T., Koga T., and Takeichi T. Studies on thermal and mechanical properties of polyimide-clay nanocomposites. Polymer 42 8 (2001) 3399-3408
50. In: Nielsen L.E. (Ed). Mechanical properties of polymers and composites vol. 2 (1974), Marcel Dekker, New York
51. Sharifa J., Yunus W.M.Z.W., Dahlan K.Z.H.M., and Ahmad M.H. Preparation and properties of radiation crosslinked natural rubber/clay nanocomposites. Polym Test 24 2 (2005) 211-217
52. Miyata T., Inaki K., Morikawa J., Satoto R., and Hashimoto T. Effects of copolyester/polycarbonate blend composition on the thermal diffusivity of dye transfer printing. J Appl Polym Sci 92 1 (2004) 72-76
53. Paul D.R., and Newman S. Polymer blends vol. 1 (1978), Academic Press, New York
54. Maity M., Khatua B.B., and Das C.K. Effect of processing on the thermal stability of the blends based on polyurethane: part IV. Polym Degrad Stabi 72 3 (2000) 499-503
55. Gann R.G., Dipert R.A., and Drews M.J. Flammability. In: Kroschwitz J.I. (Ed). Encyclopedia of polymer science and engineering vol. 7, 2nd ed. (1985), John Wiley & Sons, Inc., New York 154-210
56. Pal K., Das T., Pal S.K., and Das C.K. Use of carboxylated nitrile rubber and natural rubber blends as retreading compound for OTR tires. Polym Eng Sci 48 12 (2008) 2410-2417
57. Gent A.N., and Hindi M. Heat build-up and blowout of rubber blocks. Rubber Chem Technol 61 5 (1988) 892-905
58. Medalia A.I. Heat generation in elastomer compounds: causes and effects. Rubber Chem Technol 64 3 (1991) 481-492
59. Park D.M., Hong W.H., Kim S.G., and Kim H.J. Heat generation of filled rubber vulcanizates and its relationship with vulcanizate network structures. Eur Polym J 36 11 (2000) 2429-2436
60. Smith L.P. The language of rubber (1993), Butterworth Heinemann, London
61. Othman A.B. Property profile of a laminated rubber bearing. Polym Test 20 (2001) 159-166
62. Hao PT, Ismail H, Hashim AS. Paper presented at the 3rd Regional IMT-GT Ininet Conference, Medan, Indonesia; 2000.
63. Xie W., Hwu J.M., Jiang G.J., Buthelezi T.M., and Pan W.P. A study of the effect of surfactants on the properties of polystyrene-montmorillonite nanocomposites. Polym Eng Sci 43 (2003) 214-222
64. Zou H., Xu W., Zhang Q., and Fu Q. Effect of alkylammonium salt on the dispersion and properties of poly(p-phenylene sulfide)/clay nanocomposites via melt intercalation. J Appl Polym Sci 99 (2006) 1724-1731
65. Zhang S.W. State-of-the-art of polymer tribology. Tribol Int 31 1-3 (1998) 49-60
66. Ettles C.M.M.C., and Shen J.H. The influence of frictional heating on the sliding friction of elastomers and polymers. Rubber Chem Technol 61 1 (1988) 119-136