Predictive value of ridge dimensions on autologous bone graft resorption in staged maxillary sinus augmentation surgery using Cone-Beam CT

Clinical Oral Implants Research

Volumn 23, Issue 4, 2012, Pages 409-415

  Klijn, R J ^a   van den Beucken, J J J P ^a   Bronkhorst, E M ^a   Berge, S J ^a   Meijer, G J ^a   Jansen, J A ^a  

^a RADBOUD UNIVERSITY MEDICAL CENTER   (Netherlands)

Author keywords

Bone regeneration; CT imaging; Guided tissue regeneration; Imaging; Radiology; Sinus floor elevation; Statistics

Indexed keywords

ARTICLE; AUTOTRANSPLANTATION; BONE TRANSPLANTATION; CONE BEAM COMPUTED TOMOGRAPHY; FEMALE; HUMAN; JAW; MALE; MAXILLARY SINUS; METHODOLOGY; MIDDLE AGED; OSTEOLYSIS; PREDICTIVE VALUE; RADIOGRAPHY; RETROSPECTIVE STUDY; STATISTICAL MODEL; TREATMENT OUTCOME;

ALVEOLAR PROCESS; BONE RESORPTION; BONE TRANSPLANTATION; CONE-BEAM COMPUTED TOMOGRAPHY; FEMALE; HUMANS; LINEAR MODELS; MALE; MAXILLARY SINUS; MIDDLE AGED; PREDICTIVE VALUE OF TESTS; RETROSPECTIVE STUDIES; TRANSPLANTATION, AUTOLOGOUS; TREATMENT OUTCOME;

EID: 84858077096     PISSN: 09057161     EISSN: 16000501     Source Type: Journal    
DOI: 10.1111/j.1600-0501.2011.02342.x     Document Type: Article

References (37)

1. Bolin, A., Eliasson, S., von Beetzen, M. & Jansson, L. (1996) Radiographic evaluation of mandibular posterior implant sites: correlation between panoramic and tomographic determinations. Clinical Oral Implants Research 7: 354-359.
2. Burchardt, H. (1983) The biology of bone graft repair. Clinical Orthopaedics and Related Research 174: 28-42.
3. Cuijpers, V.M., Walboomers, X.F. & Jansen, J.A. (2010) Three-dimensional localization of implanted biomaterials in anatomical and histological specimens using combined X-ray computed tomography and three-dimensional surface reconstruction: a technical note. Tissue Engineering Part C Methods 16: 63-69.
4. De Vos, W., Casselman, J. & Swennen, G.R.J. (2009) Cone-beam computerized tomography (CBCT) imaging of the oral and maxillofacial region: a systematic review of the literature. International Journal of Oral and Maxillofacial Surgery 38: 609-625.
5. Esposito, M., Hirsch, J.M., Lekholm, U. & Thomsen, P. (1998) Biological factors contributing to failures of osseointegrated oral implants. (I). Success criteria and epidemiology. European Journal of Oral Sciences 106: 527-551.
6. Eufinger, H., Konig, S. & Eufinger, A. (1997) The role of alveolar ridge width in dental implantology. Clinical Oral Investigations 1: 169-177.
7. Eufinger, H., Konig, S., Eufinger, A. & Machtens, E. (1999) Significance of the height and width of the alveolar ridge in implantology in the edentulous maxilla. Analysis of 95 cadaver jaws and 24 consecutive patients. Mund Kiefer Gesichtschirurgie 3(Suppl. 1): S14-S18.
8. Farina, R., Pramstraller, M., Franceschetti, G., Pramstraller, C. & Trombelli, L. (2011) Alveolar ridge dimensions in maxillary posterior sextants: a retrospective comparative study of dentate and edentulous sites using computerized tomography data. Clinical Oral Implants Research 22: 1138-1144.
9. Ghaeminia, H., Meijer, G.J., Soehardi, A., Borstlap, W.A., Mulder, J., Vlijmen, O.J., Berge, S.J. & Maal, T.J. (2011) The use of cone beam CT for the removal of wisdom teeth changes the surgical approach compared with panoramic radiography: a pilot study. The International Journal of Oral and Maxillofacial Surgery 40: 834-839.
10. Hutton, J.E., Heath, M.R., Chai, J.Y., Harnett, J., Jemt, T., Johns, R.B., McKenna, S., McNamara, D.C., Van Steenberghe, D. & Taylor, R. (1995) Factors related to success and failure rates at 3-year follow-up in a multicenter study of overdentures supported by Branemark implants. The International Journal of Oral and Maxillofacial Implants 10: 33-42.
11. Isoda, K., Ayukawa, Y., Tsukiyama, Y., Sogo, M., Matsushita, Y. & Koyano, K. (2011) Relationship between the bone density estimated by cone-beam computed tomography and the primary stability of dental implants. Clinical Oral Implants Research, doi: 10.1111/j.1600-0501.2011.02203.x.
12. Johansson, B., Grepe, A., Wannfors, K. & Hirsch, J.M. (2001) A clinical study of changes in the volume of bone grafts in the atrophic maxilla. Dentomaxillofacial Radiology 30: 157-161.
13. Juodzbalys, G. & Raustia, A.M. (2004) Accuracy of clinical and radiological classification of the jawbone anatomy for implantation - a survey of 374 patients. Journal of Oral Implantology 30: 30-39.
14. Kirmeier, R., Payer, M., Wehrschuetz, M., Jakse, N., Platzer, S. & Lorenzoni, M. (2008) Evaluation of three-dimensional changes after sinus floor augmentation with different grafting materials. Clinical Oral Implants Research 19: 366-372.
15. Klijn, R.J., Meijer, G.J., Bronkhorst, E.M. & Jansen, J.A. (2010a) A meta-analysis of histomorphometric results and graft healing time of various biomaterials compared to autologous bone used as sinus floor augmentation material in humans. Tissue Engineering Part B Reviews 16: 493-507.
16. Klijn, R.J., Meijer, G.J., Bronkhorst, E.M. & Jansen, J.A. (2010b) Sinus floor augmentation surgery using autologous bone grafts from various donor sites: a meta-analysis of the total bone volume. Tissue Engineering Part B Reviews 16: 295-303.
17. Loubele, M., Bogaerts, R., Van Dijck, E., Pauwels, R., Vanheusden, S., Suetens, P., Marchal, G., Sanderink, G. & Jacobs, R. (2009) Comparison between effective radiation dose of CBCT and MSCT scanners for dentomaxillofacial applications. European Journal of Radiology 71: 461-468.
18. Martinez, H., Davarpanah, M., Missika, P., Celletti, R. & Lazzara, R. (2001) Optimal implant stabilization in low density bone. Clinical Oral Implants Research 12: 423-432.
19. McAllister, B.S. & Haghighat, K. (2007) Bone augmentation techniques. Journal of Periodontology 78: 377-396.
20. Meas, F., Colligonon, A., Vandermeulen, D., Marchal, G. & Suetens, P. (1997) Multimodality image registration by maximization of mutual information. IEEE Transactions on Medical Imaging 16: 187-198.
21. Molly, L. (2006) Bone density and primary stability in implant therapy. Clinical Oral Implants Research 17(Suppl. 2): 124-135.
22. Nackaerts, O., Maes, F., Yan, H., Couto Souza, P., Pauwels, R. & Jacobs, R. (2011) Analysis of intensity variability in multislice and cone beam computed tomography. Clinical Oral Implants Research 22: 873-879.
23. Nkenke, E. & Stelzle, F. (2009) Clinical outcomes of sinus floor augmentation for implant placement using autogenous bone or bone substitutes: a systematic review. Clinical Oral Implants Research 20(Suppl. 4): 124-133.
24. Norton, M.R. & Gamble, C. (2001) Bone classification: an objective scale of bone density using the computerized tomography scan. Clinical Oral Implants Research 12: 79-84.
25. Nystrom, E., Ahlqvist, J., Kahnberg, K.E. & Rosenquist, J.B. (1996) Autogenous onlay bone grafts fixed with screw implants for the treatment of severely resorbed maxillae. Radiographic evaluation of preoperative bone dimensions, postoperative bone loss, and changes in soft-tissue profile. The International Journal of Oral and Maxillofacial Surgery 25: 351-359.
26. Pramstraller, M., Farina, R., Franceschetti, G., Pramstraller, C. & Trombelli, L. (2011) Ridge dimensions of the edentulous posterior maxilla: a retrospective analysis of a cohort of 127 patients using computerized tomography data. Clinical Oral Implants Research 22: 54-61.
27. Saglam, A.A. (2002) The vertical heights of maxillary and mandibular bones in panoramic radiographs of dentate and edentulous subjects. Quintessence International 33: 433-438.
28. Schropp, L., Wenzel, A., Kostopoulos, L. & Karring, T. (2003) Bone healing and soft tissue contour changes following single-tooth extraction: a clinical and radiographic 12-month prospective study. International Journal of Periodontics and Restorative Dentistry 23: 313-323.
29. Sharan, A. & Madjar, D. (2008) Maxillary sinus pneumatization following extractions: a radiographic study. The International Journal of Oral and Maxillofacial Implants 23: 48-56.
30. Smolka, W., Eggensperger, N., Carollo, V., Ozdoba, C. & Iizuka, T. (2006) Changes in the volume and density of calvarial split bone grafts after alveolar ridge augmentation. Clinical Oral Implants Research 17: 149-155.
31. Stratemann, S.A., Huang, J.C., Maki, K., Miller, A.J. & Hatcher, D.C. (2008) Comparison of cone beam computed tomography imaging with physical measures. Dentomaxillofacial Radiology 37: 80-93.
32. Tepper, G., Haas, R., Zechner, W., Krach, W. & Watzek, G. (2002) Three-dimensional finite element analysis of implant stability in the atrophic posterior maxilla: a mathematical study of the sinus floor augmentation. Clinical Oral Implants Research 13: 657-665.
33. Van Der Weijden, F., Dell'Acqua, F. & Slot, D.E. (2009) Alveolar bone dimensional changes of post-extraction sockets in humans: a systematic review. Journal of Clinical Periodontology 36: 1048-1058.
34. Verhoeven, J.W., Cune, M.S., Terlou, M., Zoon, M.A. & de Putter, C. (1997) The combined use of endosteal implants and iliac crest onlay grafts in the severely atrophic mandible: a longitudinal study. The International Journal of Oral and Maxillofacial Surgery 26: 351-357.
35. Wallace, S.S. & Froum, S.J. (2003) Effect of maxillary sinus augmentation on the survival of endosseous dental implants. A systematic review. Annals of Periodontology 8: 328-343.
36. Wanschitz, F., Figl, M., Wagner, A. & Rolf, E. (2006) Measurement of volume changes after sinus floor augmentation with a phycogenic hydroxyapatite. The International Journal of Oral and Maxillofacial Implants 21: 433-438.
37. Zijderveld, S.A., Schulten, E.A., Aartman, I.H. & Ten Bruggenkate, C.M. (2009) Long-term changes in graft height after maxillary sinus floor elevation with different grafting materials: radiographic evaluation with a minimum follow-up of 4.5 years. Clinical Oral Implants Research 20: 691-700.