Thixotropy, yielding and ultrasonic Doppler velocimetry in pulp fibre suspensions

Rheologica Acta

Volumn 51, Issue 3, 2012, Pages 201-214

  Derakhshandeh, Babak ^a   Vlassopoulos, Dimitris ^b   Hatzikiriakos, Savvas G ^a  

^a UNIVERSITY OF BRITISH COLUMBIA   (Canada)

^b INSTITUTE OF ELECTRONIC STRUCTURE AND LASER   (Greece)

Author keywords

Pulp fibre suspensions; Rheo optics; Shear banding; Suspension; Thixotropy; UDV; Velocimetry; Yielding

Indexed keywords

EID: 84857654234     PISSN: 00354511     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00397-011-0577-7     Document Type: Article

References (64)

1. Bachelet C, Dantan Ph, Flaud P (2004) Indirect on-line determination of the rheological behavior of a power law fluid based on numerical flow simulations. Eur Phys J Appl Phys 25: 209-217.
2. Barnes HA (1997) Thixotropy-a review. J Non-Newton Fluid Mech 70: 1-33.
3. Baudez J, Rodts S, Chateau X, Coussot P (2004) New technique for reconstructing instantaneous profiles from viscometric tests: Application to pasty materials. J Rheol 48: 69-82.
4. Bécu L, Manneville S, Colin A (2006) Yielding and flow in adhesive and non-adhesive concentrated emulsions. Phys Rev Lett 96: 138302.
5. Beris AN, Stiakakis E, Vlassopoulos D (2008) A thermodynamically consistent model for the thixotropic behaviour of concentrated star polymer suspensions. J Non-Newton Fluid Mech 152: 76-85.
6. Bertola V, Bertrand F, Tabuteau H, Bonn D, Coussot P (2003) Wall slip and yielding in pasty materials. J Rheol 1211: 47-61.
7. Bird RB, Marsh BD (1968) Viscoelastic Hysteresis. I. Model predictions. Trans Soc Rheol 12: 479-488.
8. Bird RB, Stewart WE, Lightfoot EN (2001) Transport Phenomena, 2nd edn. Wiley, Chichester.
9. Bonn D, Denn MM (2009) Yield stress fluids slowly yield to analysis. Science 324: 1401-1402.
10. Bonn D, Coussot P, Huynh HT, Bertrand F, Debrégeas G (2002) Rheology of soft-glassy materials. Europhys Lett 59: 786-792.
11. Bonnecaze RT, Cloitre M (2010) Micromechanics of soft particle glasses. Adv Polym Sci 236: 117-161.
12. Callaghan PT (2008) Rheo NMR and shear banding. Rheol Acta 47: 243-255.
13. Cates ME, Fielding SM (2006) Rheology of giant micelles. Adv Phys 55(7-8): 799-879.
14. Cloitre M (2009) Yielding, flow and slip in microgel suspensions: From microstructure to macroscopic rheology. In: De Las Nieves, A, Weitz DA, Matteson H, Wyss H (eds) Microgels: Fundamentals and Applications. Springer, New York.
15. Coussot P (2005) Rheometry of pastes, suspensions and granular materials. Wiley, Chichester, Chapter 3: 116.
16. Coussot P (2007) Rheophysics of pastes: A review of microscopic modelling approaches. Soft Matter 3: 528-540.
17. Coussot P, Ovarlez G (2010) Physical origin of shear-banding in jammed systems. Eur Phys J 33(3): 183-188.
18. Coussot P, Leonov AI, Piau JM (1993) Rheology of concentrated dispersed systems in low molecular weight matrix. J Non-Newton Fluid Mech 46: 179-217.
19. Coussot P, Raynaud JS, Bertrand F, Moucheront P, Guilbaud JP, Huynh HT, Jarny S, Lesueur D (2002a) Coexistence of liquid and solid phases in flowing soft-glassy materials. Phys Rev Lett 88(21): 218301-1.
20. Coussot P, Nguyen QD, Huynh HT, Bonn D (2002b) Avalanche behavior in yield stress fluids. Phys Rev Lett 88: 175501.
21. Da Cruz F, Chevoir F, Bonn D, Coussot P (2002) Viscosity bifurcation in granular materials, foams, and emulsions. Phys Rev E 66(5): 051305.
22. Derakhshandeh B, Hatzikiriakos SG, Bennington CPJ (2010a) The apparent yield stress of pulp fibre suspensions. J Rheology 54(5): 1137-1154.
23. Derakhshandeh B, Hatzikiriakos SG, Bennington CPJ (2010b) Rheology of pulp fibre suspensions using ultrasonic Doppler velocimetry. Rheol Acta 49(11-12): 1127-1140.
24. Derakhshandeh B, Kerekes RJ, Hatzikiriakos SG, Bennington CPJ (2011) Rheology of pulp fibre suspensions: A critical review. Chem Eng Sci 66(15): 3460-3470.
25. Dhont JKG, Briels WJ (2008) Gradient and vorticity banding. Rheol Acta 47: 257-281.
26. Dullaert K, Mewis J (2005) Thixotropy: Build-up and breakdown curves during flow. J Rheol 49(6): 1213-1231.
27. Erwin BM, Vlassopoulos D, Cloitre M (2010) Rheological fingerprinting of an aging soft colloidal glass. J Rheol 54(4): 915-939.
28. Fisher DT, Clayton SA, Boger DV, Scales PJ (2007) The bucket rheometer for shear stress-shear rate measurement of industrial suspensions. J Rheol 51(5): 821-831.
29. Hatzikiriakos SG, Dealy JM (1992) Role of slip and fracture in the oscillating flow of HDPE in a capillary. J Rheol 36: 845-884.
30. Hein IA, O'Brien WD (1993) Current time-domain methods for assessing tissue motion by analysis from reflected ultrasound echoes-A review. IEEE Trans Ultrason, Ferroelect, Freq Control 40: 84-102.
31. Jarny S, Roussel N, Rodts S, Le Roy R, Coussot P (2005) Rheological behavior of cement pastes from MRI velocimetry. Concrete Cement Res 35: 1873-1881.
32. Kanai H, Amari T (1995) Negative thixotropy in ferric-oxide suspensions. Rheol Acta 34: 303-310.
33. Kerekes RJ (2006) Rheology of fibre suspensions in papermaking: an overview of recent research. Nord Pulp Pap Res J 21(5): 598-612.
34. th Fundamental Research Symposium, Mechanical Engineering Publications, Oxford, England: 265-310.
35. Koseli V, Zeybek S, Uludag Y (2006) Online viscosity measurement of complex solutions using ultrasound doppler velocimetry. Turk J Chem 30: 297-305.
36. Krieger IM, Maron SH (1952) Direct determination of the flow curves of non-Newtonian fluids. J Appl Phys 23: 147-149.
37. Macosko CHW (1994) Rheology: principles, measurements, and applications. Wiley, Chichester.
38. Mas R, Magnin A (1994) Rheology of colloidal suspensions: Case of lubricating greases. J Rheol 38: 889-908.
39. Manneville S (2008) Recent experimental probes of shear banding. Rheol Acta 47(3): 301-318.
40. Manneville S, Bécu L, Colin A (2004) High-frequency ultrasonic speckle velocimetry in sheared complex fluids. Eur Phys J Appl Phys 28: 361-373.
41. McClements DJ, Povery MJW, Jury M (1990) Ultrasonic Characterization of a Food Emulsion. Ultrasonics 28: 266-272.
42. Meeker SP, Bonnecaze RT, Cloitre M (2004a) Slip and flow in soft particle pastes. Phys Rev Lett 92(19): 198302.
43. Meeker SP, Bonnecaze RT, Cloitre M (2004b) Slip and flow in pastes of soft particles: Direct observation and rheology. J Rheol 48(6): 1295-1320.
44. Mewis J (1979) Thixotropy-A general review. J Non-Newton Fluid Mech 6: 1-20.
45. Mewis J, Wagner NJ (2009) Thixotropy. Adv Colloid Interf Sci 147-148: 214-227.
46. Mobuchon C, Carreau PJ, Heuzey M-C (2007) Effect of flow history on the structure of a non-polar polymer/clay nanocomposite model system. Rheol Acta 46(8): 1045-1056.
47. Mylius E, Reher E (1972) Modelluntersuchungen zur Charakterisierung Thixotroper Medien un ihre Anwendung für Verfahrenstechnische Prozessberechnungen. Plaste Kautsch 19: 420-431.
48. Nguyen QD, Boger DV (1992) Measuring the flow properties of yield stress fluids. Annu Rev Fluid Mech 24: 47-88.
49. Olmsted PD (2008) Perspectives on shear banding in complex fluids. Rheol Acta 47: 283-300.
50. Ovarlez G, Rodts S, Chateau X, Coussot P (2009) Phenomenology and physical origin of shear localization and shear banding in complex fluids. Rheol Acta 48: 831-844.
51. Ovarlez G, Bertrand F, Rodts S (2006) Local determination of the constitutive law of a dense suspension of noncolloidal particles through MRI. J Rheol 50: 259-292.
52. st (ed). Woodhead Publishing Limited, Cambridge.
53. Pettersson JA (2004) Flow and mixing of pulp suspensions. Ph. D. Thesis, Chalmers University of Technology.
54. Pignon F, Magnin A, Piau JM (1996) Thixotropic colloidal suspensions and flow curves with minimum: identification of flow regimes and rheometric consequences. J Rheol 40: 573-587.
55. Piteira MF, Maia JM, Raymundo A, Sousa I (2006) Extensional flow behaviour of natural fibre-filled dough and its relationship with structure and properties. J Non-Newton Fluid Mech 137(1-3): 72-80.
56. Raynaud JS, Moucheront P, Baudez JC, Bertrand F, Guilbaud JP, Coussot P (2002) Direct determination by nuclear magnetic resonance of the thixotropic and yielding behaviour of suspensions. J Rheol 46: 709-732.
57. Schalek E, Szegvari A (1923) The slow coagulation of concentrated iron oxide sol to a reversible gel. Kolloid-Zeitschrift 33(6): 326-334.
58. Swerin A (1998) Rheological properties of cellulosic fibre suspensions flocculated by cationic polyacrylamides. Colloid Surf A: Physicochem Eng Asp 133(3): 279-294.
59. nd ed. ISBN 0-9632036-1-4.
60. Takeda Y (1986) Velocity Profile Measurement by Ultrasound Doppler Shift Method. Int J Heat Fluid Flow 7: 313-318.
61. Tucker CL III, Advani SG (1994) Flow and rheology in polymeric composites manufacturing. Elsevier, Amsterdam, pp 147-202.
62. Umer R, Bickerton S, Fernyhough A (2007) Modelling liquid composite moulding processes employing wood fibre mat reinforcements. Key Eng Mater 334: 113-116.
63. Ventura C, Blanco A, Negro C, Ferreira P, Garcia F, Rasteiro M (2007) Modeling pulp fibre suspension rheology. TAPPI J 6(7): 17-23.
64. Wikström T, Rasmuson A (1998) Yield stress of pulp suspensions: The influence of fibre properties and processing conditions. Nord Pulp Pap Resour J 13(3): 243-250.