Plasma separation PMMA device driven by capillary force controlling surface wettability

Micro and Nano Letters

Volumn 7, Issue 1, 2012, Pages 64-67

  Sakamoto, H ^a   Hatsuda, R ^a   Miyamura, K ^b   Sugiyama, S ^a  

^a RITSUMEIKAN UNIVERSITY   (Japan)

^b HORIBA LTD   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

BLOOD SAMPLES; CAPILLARY ACTION; CAPILLARY FORCE; DIAGNOSTIC SYSTEMS; HAEMOLYSIS; HIGH-THROUGHPUT; HOT-EMBOSSING; HYDROPHILIC SURFACES; MASTER MOLDS; MICRO DEVICES; MICRO-FLUIDIC DEVICES; MICROFLUIDIC PUMPS; ON-CHIP SEPARATIONS; OXYGEN PLASMAS; PASSIVE MODE; PLASMA SEPARATION; POLY-L-LYSINE; POWER SUPPLY; RED BLOOD CELL; SURFACE WETTABILITY; THERMAL BONDING;

BLOOD; PLASMAS; POLYMETHYL METHACRYLATES; SEPARATION;

BLOOD VESSELS;

OXYGEN; POLY(METHYL METHACRYLATE); POLYLYSINE; SILICON;

ARTICLE; BIOCHIP; BLOOD FLOW; BLOOD SAMPLING; CELL SEPARATION; ERYTHROCYTE; HEMOLYSIS; HUMAN; HYDROPHILICITY; MICROFLUIDICS; SURFACE PROPERTY; WETTABILITY;

EID: 84857226497     PISSN: None     EISSN: 17500443     Source Type: Journal    
DOI: 10.1049/mnl.2011.0627     Document Type: Article

References (22)

1. Crevillen, A.G., Harvas, M., Lopez, M.A., Gonzalez, M.C., and Escarpa, A.: ' Real sample analysis on microfluidic devices ', Talanta, 2007, 74, p. 342-357 10.1016/j.talanta.2007.10.019 (Pubitemid 350192535)
2. Bashir, R.: ' BioMEMS: state-of-the-art in detection, opportunities and prospects ', Adv. Drug. Deliv. Rev., 2004, 56, p. 1565-1586 10.1016/j.addr.2004. 03.002 (Pubitemid 39177689)
3. Xu, X., Zhang, S., Chen, H., and Kong, J.: ' Integration of electrochemistry in micro-total analysis systems for biochemical assays: recent developments ', Talanta, 2009, 80, p. 8-18 10.1016/j.talanta.2009.06.039
4. Louis, P.ST.: ' Status of point-of-care-testing: promise, realities, and possibilities ', Clin. Biochem., 2000, 33, p. 427-440 10.1016/S0009-9120(00) 00138-7
5. Wager, E.A., Yasin, B., and Yuan, S.: ' Point-of-care testing: twenty years' experience ', LABMEDICINE, 2008, 39, p. 560-563
6. Drenck, N.E.: ' Point of care testing in critical care medicine: the clinician's view ', Clin. Chim. Acta., 2001, 307, p. 3-7 10.1016/S0009-8981(01) 00448-X (Pubitemid 32448896)
7. Oki, A., Takai, M., and Ogawa, H.: et al. ' Healthcare chip for checking health condition from analysis of trace blood collected by painless needle ', Jpn. J. Appl. Phys., 2003, 42, p. 3722-3727 10.1143/JJAP.42.3722 0021-4922
8. Steigert, J., Grumann, M., and Dube, M.: et al. ' Direct hemoglobin measurement on a centrifugal microfluidic platform for point-of-care diagnostics ', Sens. Actuat. A, 2006, 130, p. 228-233 10.1016/j.sna.2006.01.031 (Pubitemid 44037356)
9. Li, J.M., Liu, C., and Dai, X.D.: et al. ' PMMA microfluidic devices with three-dimensional features for blood cell filtration ', J. Micromech. Microeng., 2008, 18, p. 095021-095028 10.1088/0960-1317/18/9/095021 0960-1317
10. Xing, C., Dafu, C., and LuLu, Z.: ' Isolation of plasma from whole blood using a microfludic chip in a continuous cross-flow ', Chin. Sci. Bull., 2009, 54, p. 324-327 10.1007/s11434-008-0551-7 1001-6538
11. Higuchi, A., Yamamiya, S., Yoon, B.O., Sakurai, M., and Hara, M.: ' Peripheral blood cell separation through surface-modified polyurethane membranes ', J. Biomed. Mater. Res., 2003, 68A, p. 34-42 10.1002/jbm.a.20005 (Pubitemid 38030182)
12. Huang, L.R., Cox, E.C., Austin, R.H., and Sturm, L.C.: ' Continuous particle separation through deterministic lateral displacement ', Science, 2004, 304, p. 987-990 10.1126/science.1094567 0036-8075 (Pubitemid 38638091)
13. Charnley, J.: ' The reaction of bone to self-curing acrylic cement: a long-term histological study in man ', J. Bone Joint. Surg., 1970, 52, p. 340-353
14. Kanie, T., Arikawa, H., Fujii, K., and Inoue, K.: ' Physical and mechanical properties of PMMA resins containing γ- methacryloxypropyltrimethoxysilane ', J. Oral Rehabil., 2004, 31, p. 166-171 10.1111/j.1365-2842.2004.01043.x (Pubitemid 38315486)
15. Boger, A., Bisig, A., Bohner, M., Heini, P., and Schneider, E.: ' Variation of the mechanical properties of PMMA to suit osteoporotic cancellous bone ', J. Biomater. Sci. Polym. Ed., 2008, 19, p. 1125-1142 10.1163/156856208785540154 0920-5063
16. Achilias, D.S.: ' Chemical recycling of poly(methyl methacrylate) by pyrolysis. Potential use of the liquid fraction as a raw material for the reproduction of the polymer ', Eur. Polym. J., 2007, 43, p. 2564-2575 10.1016/j.eurpolymj.2007.02.044 0014-3057 (Pubitemid 46856374)
17. Guo, Y., Xia, F., Xu, L., Li, J., Yang, W., and Jiang, L.: ' Switchable wettability on cooperative dual-responsive poly-L-lysine surface ', Langmuir, 2010, 26, p. 1024-1028 10.1021/la9041452 0743-7463
18. Taguenang, J.M., Kassu, A., and Sharma, A.: ' Photopatterning in poly-L-lysine thin films using UV-enhanced hydrophilicity ', J. Colloid. Interf. Sci., 2006, 303, p. 525-531 10.1016/j.jcis.2006.07.062 (Pubitemid 44547948)
19. Mathur, A., Roy, S.S., Tweedie, M., Mukhopadhyay, S., Mitra, S.K., and McLaughlin, J.A.: ' Characterisation of PMMA microfluidic channels and devices fabricated by hot embossing and sealed by direct bonding ', Curr. Appl. Phys., 2009, 9, p. 1199-1202 10.1016/j.cap.2009.01.007
20. Brown, L., Koerner, T., Horton, J.H., and Oleschuk, R.D.: ' Fabrication and characterization of poly(methyl methacrylate) microfluidic devices bonded using surface modifications and solvents ', Lab on a Chip, 2006, 6, p. 66-73 10.1039/b512179e
21. Chai, J., Lu, F., Li, B., and Kwok, D.Y.: ' Wettability interpretation of oxygen plasma modified poly(methyl methacrylate) ', Langmuir, 2004, 20, p. 10919-10927 10.1021/la048947s 0743-7463
22. Johansson, B.L., Larsson, A., Ocklind, A., and Ohrlund, A.: ' Characterization of air plasma-treated polymer surfaces by ESCA and contact angle measurements for optimization of surface stability and cell growth ', J. Appl. Polym. Sci., 2002, 86, p. 2618-2625 10.1002/app.11209 0021-8995 (Pubitemid 35220958)