Concurrent multi-scale crush simulations with a crystal plasticity model

Thin-Walled Structures

Volumn 53, Issue , 2012, Pages 176-187

  Najafi, A ^a   Marin, E B ^a   Rais Rohani, M ^a  

^a MISSISSIPPI STATE UNIVERSITY   (United States)

Author keywords

Crush simulation; Crystal plasticity; Finite element analysis; Multi corner crush tubes; Texture induced anisotropy

Indexed keywords

ALUMINUM ALLOYS; ANISOTROPY; BOUNDARY VALUE PROBLEMS; DEFORMATION; SHEAR FLOW;

CRYSTAL PLASTICITY; CRYSTAL PLASTICITY MODELS; EXPLICIT FINITE ELEMENTS; LARGE PLASTIC DEFORMATION; MULTI-CORNER CRUSH TUBES; POLYCRYSTALLINE AGGREGATES; REPRESENTATIVE VOLUME ELEMENT (RVE); TEXTURE INDUCED ANISOTROPIES;

FINITE ELEMENT METHOD;

EID: 84856770736     PISSN: 02638231     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.tws.2011.12.019     Document Type: Article

References (72)

1. A. Najafi, and M. Rais-Rohani Mechanics of axial plastic collapse in multi-cell, multi-corner crush tubes Thin-Walled Structures 49 1 2011 1 12
2. Najafi A, Rais-Rohani M. Influence of cross-sectional geometry on crash characteristics of crush tubes. In: Proceedings of 49th AIAA/ASME/ASC/AHS/ASC structures, structural dynamics and materials conference, Schaumburg, IL; April 2008.
3. T. Wierzbicki, and W. Abramowicz On the crushing mechanics of thin walled structures Journal of Applied Mechanics 50 1983 727 734 (Pubitemid 14490505)
4. N. Jones, and T. Wierzbicki Structural Failures 1989 John Wiley New York
5. W. Abramowicz, and T. Wierzbicki Axial crushing of multicorner sheet metal columns Journal of Applied Mechanics 56 1989 113 120
6. W. Abramowicz, and N. Jones Dynamic axial crushing of square tubes International Journal of Impact Engineering 2 2 1984 179 208 (Pubitemid 14668662)
7. M. Langseth, and O.S. Hopperstad Static and dynamic axial crushing of square thin-walled aluminum extrusions International Journal of Impact Engineering 18 78 1996 949 968 (Pubitemid 126371759)
8. A.G. Hanssen, M. Langseth, and O.S. Hopperstad Static and dynamic crushing of square aluminum extrusions with aluminum foam filler International Journal of Impact Engineering 24 4 2000 347 383 (Pubitemid 30555610)
9. A.G. Hanssen, M. Langseth, and O.S. Hopperstad Optimum design for energy absorption of square aluminum columns with aluminum foam filler International Journal of Mechanical Sciences 43 1 2001 153 176 (Pubitemid 33375912)
10. W. Abramowicz Thin-walled structures as impact energy absorbers Thin-Walled Structures 41 23 2003 91 107
11. A. Otubushin Detailed validation of a non-linear finite element code using dynamic axial crushing of a square tube International Journal of Impact Engineering 21 5 1998 349 368 (Pubitemid 128435912)
12. W. Chen, and T. Wierzbicki Relative merits of single-cell, multi-cell and foam-filled thin-walled structures in energy absorption Thin-Walled Structures 39 4 2001 287 306 (Pubitemid 32272126)
13. H.S. Kim New extruded multi-cell aluminum profile for maximum crash energy absorption and weight efficiency Thin-Walled Structures 40 4 2002 311 327
14. X. Zhang, and G. Cheng A comparative study of energy absorption characteristics of foam-filled and multi-cell square columns International Journal of Impact Engineering 34 11 2007 1739 1752 (Pubitemid 46880108)
15. Faruque O, Saha N. Extruded aluminum crash can topology for maximizing specific energy absorption. SAE Technical Paper Series; 2008.
16. R.A. Regueiro, D.J. Bammann, E.B. Marin, and K. Garikipati A nonlocal phenomenological anisotropic finite deformation plasticity model accounting for dislocation defects Journal of Engineering Materials and Technology 124 2002 380 387 (Pubitemid 40000930)
17. D.J. Bammann A model of crystal plasticity containing a natural length scale Materials Science and Engineering A309310 2001 406 410 (Pubitemid 32541031)
18. F. Roters, P. Eisenlohr, L. Hantcherli, D.D. Tjahjanto, T.R. Bieler, and D. Raabe Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: theory, experiments, applications Acta Materialia 58 2010 1152 1211
19. Horstemeyer, MF. From atoms to autos - a new design paradigm using microstructureproperty modeling part 1: monotonic loading conditions. SAND20008662. Sandia National Laboratory; March 2001.
20. B.P. DiPaolo, P.J.M. Monteirob, and R. Gronsky Quasi-static axial crush response of a thin-wall, stainless steel box component International Journal of Solids and Structures 41 14 2004 3707 3733 (Pubitemid 38673414)
21. B.P. Dipaolo, and J.G. Tom A study on an axial crush configuration response of thin-wall, steel box components: the quasi-static experiments International Journal of Solids and Structures 43 2526 2006 7752 7775 (Pubitemid 44634471)
22. Najafi A. Axial collapse of thin-walled, multi-corner single- and multi-cell tubes. MSc thesis. Department of Aerospace Engineering, Mississippi State University; 2009.
23. Najafi A, Rais-Rohani. Sequential multi-attribute process-performance simulation and optimization of thin-walled components. In: Proceedings of the 16th design for manufacturing and the life cycle conference (DFMLC), Washington, DC; August 2831, 2011.
24. Najafi A, Rais-Rohani, Hammi Y. Multi-attribute integrated forming-crush simulation optimization using internal state variable model. In: Proceedings of the first world congress on integrated computational materials engineering, Seven Springs, PA; July 1014, 2011.
25. F. Barlat, K. Chung, and O. Richmond Anisotropic plastic potentials for polycrystals and application to the design of optimum blank shapes in sheet forming Metallurgical and Materials Transaction A 25A 1994 1209 1216
26. F. Barlat, and K. Chung Anisotropic potentials for plastically deforming metals Modeling and Simulation in Materials Science and. Engineering 1 1993 403 416
27. H. Aretz A simple isotropic-distortional hardening model and its application in elasticplastic analysis of localized necking in orthotropic sheet metals International Journal of Plasticity 24 2008 1457 1480
28. M. Ortiz, and E.P. Popov Distortional hardening rules for metal plasticity Journal of Engineering Mechanics - ASCE 109 4 1983 1042 1057 (Pubitemid 13593124)
29. Y.F. Dafalias Orientational evolution of plastic orthotropy in sheet metals Journal of the Mechanics and Physics of Solids 48 2000 2231 2255
30. Y.F. Dafalias Orientational distribution function in non-affine rotations Journal of the Mechanics and Physics of Solids 49 2001 2493 2516 (Pubitemid 32975662)
31. Marin EB. On the formulation of crystal plasticity model. Sandia Report SAND2006-4170. Sandia National Laboratory; 2006.
32. C.L. Xie, and E. Nakamachi Investigations of the formability of BCC steel sheets by using crystalline plasticity finite element analysis Material Design 23 2002 59 68 (Pubitemid 34085544)
33. D. Raabe, and F. Roters Using texture components in crystal plasticity finite element simulations International Journal of Plasticity 2004 339 361 20 2004 339 361
34. D. Raabe, Y. Wang, and F. Roters Crystal plasticity simulation study on the influence of texture on earing in steel Computational Materials Science 2005 221 234 34 2005 221 234 (Pubitemid 40963152)
35. Y.P. Chen, W.B. Lee, and S. To Influence of initial texture on formability of aluminum sheet metal by crystal plasticity FE simulation Journal of Material Processing and Technology 192193 2007 397 403 (Pubitemid 47187950)
36. A.J. Beaudoin, K.K. Mathur, P.R. Dawson, and G.C. Johnson Three dimensional deformation process simulation with explicit use of polycrystal plasticity models International Journal of Plasticity 9 1993 833 860
37. A.J. Beaudoin, P.R. Dawson, K.K. Mathur, U.F. Kocks, and D.A. Korzekwa Application of polycrystal plasticity to sheet forming Computer Methods in Applied Mechanics and Engineering 1994 49 70 117 1994 49 70
38. D. Raabe, P. Klose, B. Engl, K.-P. Imlau, F. Friedel, and F. Roters Concepts for integrating plastic anisotropy into metal forming simulations Advanced Engineering Materials 4 2002 169 180
39. Horstemeyer M, Potirniche G, Marin EB. Mesoscalemacroscale continuum modeling: crystal plasticity. In: Yip S, editor. Handbook for materials modeling. 3300 AA Dordrecht, The Netherland: Springer [Chapter 3], 2005.
40. Wierzbicki T, Schneider F. Energy equivalent flow stress in crash calculations. Impact and Crashworthiness Laboratory, MIT; 1999.
41. G.I. Taylor Plastic strain in metals Journal of the Institute of Metals 62 1938 307 324
42. J.F.W. Bishop, and R. Hill A theory of the plastic distortion of a polycrystalline aggregate under combined stresses Philosophical Magazine 42 1951 414 427
43. J.F.W. Bishop, and R. Hill A theoretical derivation of the plastic properties of a polycrystalline face centered metal Philosophical Magazine 42 1951 1298 1307
44. E. Kröner On the plastic deformation of polycrystals Acta Metallurgica 9 1961 155 161
45. M. Francois A plasticity model with yield surface distortion for non-proportional loading International Journal of Plasticity 17 2001 703 717 (Pubitemid 32409172)
46. E.B. Marin, and P.R. Dawson On modeling the elasto-viscoplastic response of metals using polycrystal plasticity Computer Methods in Applied Mechanics and Engineering 165 1998 1 21
47. E.B. Marin, and P.R. Dawson Elastoplastic finite element analysis of metal deformations using polycrystal constitutive models Computer Methods in Applied Mechanics and Engineering 165 1998 23 41
48. U.F. Kocks, A.S. Argon, and M.F. Ashby Thermodynamics and kinetics of slip 1975 Pergamon Press
49. U.F. Kocks, C.N. Tome, and H.-R. Wenk Texture and anisotropy 1st edition 1998 Cambridge University Press
50. M.A. Meyers, O. Vohringer, B.K. Kad, Q. Xue, and H.-H. Fu Consitutive description of dynamic deformation: physically-based mechanisms Material Science and Engineering A322 2002 194 216 (Pubitemid 34135043)
51. M. Kothari, and L. Anand Elasto-viscoplastic constitutive equations for polycrystalline metals: application to Tantaluni Journal of the Mechanics and Physics of Solids 46 1998 51 83 (Pubitemid 128392897)
52. ABAQUS/Standard users manual, version 6.10. Rhode Island, USA: Hibbit, Karlsson and Sorensen Inc.; 2010.
53. ABAQUS/Explicit users manual, version 6.10. Rhode Island, USA: Hibbit, Karlsson and Sorensen Inc.; 2010.
54. B.D. Coleman, and M.E. Gurtin Thermodynamics with internal state variables Journal of Chemical Physics 47 1967 597 613
55. P.S. Follansbe, and U.F. Kocks A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable Acta Metallurgica 36 1988 81 93 (Pubitemid 18626871)
56. P. Aubertin, J. Rethore, and R. de Borst Dynamic crack propagation using a combined molecular dynamics/extended finite element approach International Journal for Multiscale Computational Engineering 8 2010 221 235
57. W.K. Liu, D. Qian, S. Gonella, S. Li, W. Chen, and S. Chirputkar Multiscale methods for mechanical science of complex materials: bridging from quantum to stochastic multiresolution continuum International Journal for Numerical Methods in Engineering 83 89 2010 1039 1080
58. R. Gracie, and T. Belytschko Concurrently coupled atomistic and XFEM models for dislocations and cracks International Journal for Numerical Methods in Engineering 78 3 2009 354 378
59. Y.F. Guo, and Y.C. Gao Combined atomistic simulation and continuum mechanics: size-dependent behavior of atomistic simulation for brittle fracture in bcc-iron Computational Materials Science 36 4 2006 432 439
60. R. Miller, M. Ortiz, R. Phillips, V. Shenoy, and E.B. Tadmor Quasicontinuum models of fracture and plasticity Engineering Fracture Mechanics 61 34 1998 427 444 (Pubitemid 29085496)
61. H. Lu, N.P. Daphalapurkar, B. Wang, S. Roy, and R. Komanduri Multiscale simulation from atomistic to continuum - coupling molecular dynamics (MD) with the material point method (MPM) Philosophical Magazine 86 20 2006 2971 2994 (Pubitemid 43977233)
62. W.A. Curtin, and R.E. Miller Atomistic/continuum coupling in computational materials science Modelling and Simulation in Materials Science and Engineering 11 2003 33 68
63. G.H. Campbell, S.M. Foiles, H. Huang, D.A. Hughes, W.E. King, D.H. Lassila, D.J. Nikkel, T.D. de la Rubia, J.Y. Shu, and V.P. Smyshlyaev Multi-scale modeling of polycrystal plasticity: a workshop report Materials Science and Engineering A 251 12 1998 1 22 (Pubitemid 129520930)
64. S.Q. Tang, W.K. Liu, E.G. Karpov, and T.Y. Hou Bridging atomistic/continuum scales in solids with moving dislocations Chinese Physics Letters 24 1 2007 161 164
65. Fish J. Bridging the scales in nano engineering and science. Journal of Nanoparticle Research 2006;8(5):57794.
66. Shenoy VB. Multi-scale modeling strategies in materials science - the quasicontinuum method. Bulletin of Materials Science 2003;26(1):5362.
67. J.D. Clayton, and P.W. Chung An atomistic-to-continuum framework for nonlinear crystal mechanics based on asymptotic homogenization Journal of the Mechanics and Physics of Solids 54 8 2006 1604 1639 (Pubitemid 43776861)
68. R.E. Miller, and E.B. Tadmor A unified framework and performance benchmark of fourteen multiscale atomistic/continuum coupling methods Modelling and Simulation in Materials Science and Engineering 17 2009 1 51
69. J. Halquist LS-DYNA users manual 2009 Livermore Software Technology Corporation
70. D.L. McDowell Internal state variable models for rate and temperature dependent behavior at finite strain S. Yip, Handbook of materials modeling: models, part 2 2005 Springer
71. T. Belytschko, W.K. Liu, and B. Moran Nonlinear finite elements for continua and structures 2000 John Wiley & Sons New York
72. Kocks UF, Mecking H. A mechanism for static and dynamic recovery. In: Proceedings of the fifth international conference on the strength of metals and alloys. Haasen P, Gerold V, Kostorz G, editors. Pergamon; 1979. p. 34550