Multi-scale modeling of polycrystal plasticity: A workshop report

Materials Science and Engineering: A

Volumn 251, Issue 1-2, 1998, Pages 1-22

  Campbell, Geoffrey H ^a   Foiles, Stephen M ^b   Huang, Hanchen ^a   Hughes, Darcy A ^b   King, Wayne E ^a   Lassila, David H ^a   Nikkel, Daniel J ^a   De La Rubia, Tomas Diaz ^a   Shu, John Y ^a   Smyshlyaev, Valery P ^c  

^a LAWRENCE LIVERMORE NATIONAL LABORATORY   (United States)

^b SANDIA NATIONAL LABORATORIES   (United States)

^c UNIVERSITY OF BATH   (United Kingdom)

Author keywords

Dislocation dynamics; Mechanics; Multi scale modeling; Plasticity

Indexed keywords

COMPUTER SIMULATION; DISLOCATIONS (CRYSTALS); INTERFACES (MATERIALS); MATHEMATICAL MODELS; MECHANICS; PLASTIC DEFORMATION; PLASTICITY;

ATOMIC SCALE; CONTINUUM SCALE; DISLOCATION DYNAMICS; MESO SCALE; MICRO SCALE; MULTI SCALE MODELING;

POLYCRYSTALS;

EID: 0002190916     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/s0921-5093(98)00640-6     Document Type: Conference Paper

References (141)

1. King W.E., Campbell G., Gonis T., Henshall G., Lesuer D., Zywicz E., Foiles S. Mat. Sci. Eng. A 191:1995;1-16.
2. D.H. Lassila, Strength Modeling Issues Associated with Shaped-Charge Hydrocode Simulations, presented at the conference on Multi-Scale Modeling of Polycrystal Plasticity, in La Jolla, CA, April 9, 1997.
3. J.C. Foster, Challenges of Modeling the Inelastic Behavior of Materials in Conventional Warhead Design Problem, presented at the conference on Multi-Scale Modeling of Polycrystal Plasticity, in La Jolla, CA, April 9, 1997.
4. W.P. Walters, J.A. Zukas, Fundamentals of Shaped Charges, John Wiley and Sons, New York, 1989.
5. D.J. Nikkel, D.H. Lassila, The effect of the constitutive response on the predicted temperatures, in: S.C. Schmidt, J.W. Shaner, G.A. Samara, M. Ross (Eds.), Copper Jets, High Pressure Science and Technology - 1993, American Institute of Physics, New York, 1994, p. 1857.
6. Steinberg D.J., Cochran S.G., Guinan M.W. J. Appl. Phys. 51:1980;1498.
7. Follansbee P.S., Kocks U.F. Acta Metall. 36:1988;81-93.
8. Maudlin P.J., Wright S.I., Kocks U.F., Sahota M.S. Acta. Mater. 44:1996;4027-4032.
9. Maudlin P.J., Schiferl S.K. Comp. Meth. Appl. Mech. Eng. 131:1996;1-30.
10. Schiferl S.K., Maudlin P.J. Comp. Meth. Appl. Mech. Eng. 143:1997;249-270.
11. U.F. Kocks, C.N. Tome, H.R. Wenk, Texture and Anisotropy, Cambridge University Press, Cambridge, 1998.
12. Koiter W.T. Quart. Appl. Math. 11:1953;350.
13. P.J. Maudlin, An Application of Multisurface Plasticity Theory in Solid Mechanics Codes: Yield Surfaces of Textured Materials, presented at the conference on Multi-Scale Modeling of Polycrystal Plasticity, in La Jolla, CA, April 9, 1997.
14. Beaudoin A.J., Mathur K.K., Dawson P.R., Johnson G.C. Int. J. Plast. 9:1993;833-860.
15. Sarma G.B., Dawson P.R. Acta. Mater. 44:1996;1937-1953.
16. P.R. Dawson, Predicting Continuum Manifestions of Anisotropy by Including Crystallographic Texture in Finite Element Formulations, presented at the conference on Multi-Scale Modeling of Polycrystal Plasticity, in La Jolla, CA, April 9, 1997.
17. Beaudoin A.J., Dawson P.R., Mathur K.K., Kocks U.F. Comp. Meth. Appl. Mech. Eng. 117:1994;49-70.
18. Dawson P.R., Follansbee P.S. J. Eng. Mat. Tech. 115:1993;446-454.
19. Lee Y.S., Dawson P.R. J. Appl. Mech. 56:1989;318-327.
20. Chastel Y.B., Dawson P.R., Wenk H.R., Bennett K. J. Geophys. Res. Solid Earth. 98:1993;17757-17771.
21. U.F. Kocks, Strain Hardening and 'Strain-Rate Hardening', in: R.W. Rohde, J.C. Swearengen (Eds.), Mechanical Testing for Deformation Model Development, American Society for Testing and Materials, Philadelphia, PA, 765, 1982, pp. 121-138.
22. Mecking H., Kocks U.F. Acta Metall. 29:1981;1865-1875.
23. U.F. Kocks, Quantitative Analysis and Prediction of Strain Hardening Curves, presented at the conference on Multi-Scale Modeling of Polycrystal Plasticity, in La Jolla, CA, April 9, 1997.
24. U.F. Kocks, Constitutive behavior based on crystal plasticity, in: A.K. Miller (Ed.), Unified Constitutive Equations for Creep and Plasticity, Elsevier, New York, NY, 1987, pp. 1-88.
25. S.R. Chen, U.F. Kocks, High-Temperature Plasticity in Copper Polycrystals, in: A.D. Freed, K.P. Walker (Eds.), High Temperature Constitutive Modeling, American Society of Mechanical Engineers, New York, 1991, pp. 1-12.
26. S. Ahzi, New Developments in Polycrystalline Plasticity Interaction Laws and Applications, presented at the conference on Multi-Scale Modeling of Polycrystal Plasticity, in La Jolla, CA, April 9, 1997.
27. Molinari A., Ahzi S., Kouddane R. Mech. Mater. 26:1997;43-62.
28. Schoenfeld S.E., Ahzi S., Asaro R.J. J. Mech. Phys. Sol. 43:1995;415-446.
29. Lee B.J., Ahzi S., Asaro R.J. Mech. Mater. 20:1995;1-8.
30. Lee B.J., Ahzi S., Kad B.K., Asaro R.J. Scripta Metall. Mater. 29:1993;823-828.
31. Nemat-Nasser S., Isaacs J.B. Acta. Mater. 45:1997;907-919.
32. Hoge K.H., Mukherjee A.K. J. Mater. Sci. 12:1977;1666-1672.
33. Meyers M.A., Chen Y.-J., Marquis F.D.S., Kim D.S. Metall. Trans. A. 26A:1995;2493-2501.
34. Nemat-Nasser S., Li Y. Acta. Mater. 46:1998;565-577.
35. Rashid M.M., Gray III G.T., Nemat-Nasser S. Philos. Mag. A 65:1992;707-735.
36. S. Nemat-Nasser, Dislocation-Based Models of Flow Stress of BCC and FCC Metals with Application to Tantalum and Copper, presented at the conference on Multi-Scale Modeling of Polycrystal Plasticity, in La Jolla, CA, April 11, 1997.
37. Nemat-Nasser S., Isaacs J.B., Starrett J.E. Proc. R. Soc. London. A 435:1991;371-391.
38. R. Hill, Mathematical Theory of Plasticity, Clarendon, Oxford, 1950.
39. Taylor G.I. J. Inst. Met. 62:1938;307-324.
40. Bishop J.F.W., Hill R. Philos. Mag. 42:1951;414-427.
41. V. Smyshlyaev, Hashin-Shtrikman Type Techniques for Homogenization from Crystals to Polycrystals, presented at the conference on Multi-Scale Modeling of Polycrystal Plasticity, in La Jolla, CA, April 9, 1997.
42. Hashin Z., Shtrikman S. J. Mech. Phys. Sol. 10:1962;343-352.
43. Smyshlyaev V.P., Fleck N.A. J. Mech. Phys. Sol. 44:1996;465-495.
44. H. Garmestani, Statistical Continuum Theory for Microstructure Evolution of an Inelastic Heterogeneous Medium, presented at the conference on Multi-Scale Modeling of Polycrystal Plasticity, in La Jolla, CA, April 10, 1997.
45. Adams B.L., Canova G.R., Molinari A. Textures Microtextures. 11:1989;57-71.
46. Molinari A., Canova G.R., Ahzi S. Acta Metall. 35:1987;2983-2994.
47. R. Dendievel, G. Bonnet, J.R. Willis, Bounds for the creep behavior of polycrystalline materials, in: G.J. Dvorak (Ed.), Inelastic Deformation of Composite Materials, Springer-Verlag, New York, 1991, pp. 175-192.
48. De Botton G., Ponte Casteneda P. Variational estimates for the creep behavior of polycrystals. Proc. R. Soc. London. A 448:1995;121-142.
49. Ponte Castaneda P., Zaidman M. J. Mech. Phys. Sol. 42:1994;1459-1497.
50. Ponte Castañeda P., Zaidman M. Int. J. Solid Struct. 33:1996;1271-1286.
51. Ponte Castañeda P., Zaidman M. Int. J. Solid Struct. 33:1996;1287-1303.
52. Ponte Castañeda P., Willis J.R. J. Mech. Phys. Sol. 43:1996;1919-1951.
53. Kailasam M., Ponte Castaneda P., Willis J.R. Phil. Trans. R. Soc. A. 355:1997;1835-1852.
54. Kailasam M., Ponte Castañeda P., Willis J.R. Phil. Trans. R. Soc. A 355:1997;1853-1872.
55. Peirce D., Asaro R.J., Needleman A. Acta Metall. 31:1983;1951-1976.
56. J.L. Bassani, Incompatible Lattice Deformations and Nonlocal Crystal Plasticity, presented at the conference on Multi - Scale Modeling of Polycrystal Plasticity, in La Jolla, CA, April 9, 1997.
57. Bassani J.L. Plastic flow of crystals. Adv. Appl. Mech. 30:1994;191-256.
58. Kalidindi S.R., Bronkhorst C.A., Anand L. J. Mech. Phys. Sol. 40:1992;537-569.
59. Stelmashenko N.A., Walls M.G., Brown L.M., Milman Y.V. Acta Metall. Mater. 41:1993;2855-2865.
60. J.Y. Shu, Strain Gradient Crystal Plasticity: Bridging the Micro- and Macro-Length Scales, presented at the conference on Multi - Scale Modeling of Polycrystal Plasticity, in La Jolla, CA, April 10, 1997.
61. Nye J.F. Acta Metall. 1:1953;153-162.
62. Ashby M.F. Philos. Mag. 21:1970;399-424.
63. A. Acharya, J.L. Bassani, On Non-Local Flow Theories that Preserve the Classical Structure of Incremental Boundary Value Problems, Micromechanics of Plasticity and Damage of Multiphase Materials, Paris, 1995.
64. Fleck N.A., Hutchinson J.W. Appl. Mech. 33:1997;295-362.
65. J.Y. Shu, N.A. Fleck, J. Mech. Phys. Sol. (in press).
66. D.K. Chan, D.H. Lassila, W.E. King, E.B. Baker, Experimental evidence for sulfur induced loss of ductility in copper shaped-charge jets, in: R.L. Blumberg-Selinger, J.J. Mecholsky, A.E. Carlsson, E.R. Fuller Jr. (Eds.), Fracture-Instability Dynamics, Scaling and Ductile-Brittle Behavior, Materials Research Society, Pittsburgh, PA, 409, 1996, pp. 195-200.
67. Robertson I.M., Lee T.C., Birnbaum H.K. Ultramicroscopy. 40:1992;330-338.
68. Lee T.C., Robertson I.M., Birnbaum H.K. Metall. Trans. A 21:1990;2437-2447.
69. Lee T.C., Robertson I.M., Birnbaum H.K. Philos. Mag. A 62:1990;131-153.
70. Mason T.A., Adams B.L. JOM J. Min. Metal Mater. Soc. 46:1994;43-45.
71. Adams B.L. Mat. Sci. Eng. A 166:1993;59-66.
72. Adams B.L., Wright S.I., Kunze K. Metall. Trans. A 24:1993;819-831.
73. Doherty R.D., Samajdar I., Kunze K. Scripta Metall. Mater. 27:1992;1459-1464.
74. A.J. Schwartz, D.H. Lassila, M.M. LeBlanc, Mat. Sci. Eng. A 244 (1998) 178-190.
75. Etingof P.I., Sam D.D., Adams B.L. Philos. Mag. A 72:1995;199-208.
76. Fleck N.A., Muller G.M., Ashby M.F., Hutchinson J.W. Acta Metall. Mater. 42:1994;475-487.
77. Fleck N.A., Hutchinson J.W. J. Mech. Phys. Sol. 41:1993;1825-1857.
78. B.L. Adams, (private communication), (1996).
79. W. Bollmann, Crystal Defects and Crystalline Interfaces, Springer-Verlag, Berlin 1970.
80. G. Palumbo, Intercrystalline Defects and Deformation and Fracture of Micro- and Nano-scale Polycrystalline Materials, presented at the conference on Multi-Scale Modeling of Polycrystal Plasticity, in La Jolla, CA, April 10, 1997.
81. Palumbo G., Aust K.T. Can. Metall. Quart. 34:1995;165-173.
82. Brandon D.G. Acta Metall. 14:1966;1479.
83. Palumbo G., King P.J., Aust K.T., Erb U., Lichtenberger P.C. Scripta Metall. Mater. 25:1991;1775-1780.
84. G. Palumbo, P.J. King, K.T. Aust, U. Erb, P.C. Lichtenberger, Grain boundary structure control for intergranular stress-corrosion resistance, in: W.A.T. Clark, U. Dahmen, C.L. Briant (Eds.), Structure and Properties of Interfaces in Materials, Materials Research Society, Pittsburgh, PA, 238, 1992, pp. 311-316.
85. G. Palumbo, K.T. Aust, Special properties of Σ grain boundaries, in: D. Wolf, S. Yip (Eds.), Materials Interfaces: Atomic Level Structure and Properties, Chapman and Hall, London, UK, 1992, pp. 190-211.
86. Palumbo G., Aust K.T. Scripta Metall. Mater. 24:1990;1771-1776.
87. Palumbo G., Aust K.T. Mat. Sci. Eng. A 205:1996;254-254.
88. Palumbo G., Aust K.T. Scripta Metall. Mater. 22:1988;847-852.
89. Palumbo G., Aust K.T. Mat. Sci. Eng. A 113:1989;139-147.
90. C.B. Thompson, V. Randle, Towards optimization of grain-boundary structures in annealed nickel, in: G.W. Bailey, J.M. Corbett, R.V.W. Dimlich, J.R. Michael, N.J. Zaluzec (Eds.), 1996 MAS Annual Meeting, Minneapolis, MN, 11-15 August 1996.
91. G. Palumbo, P.J. King, K.T. Aust, U. Erb, P.C. Lichtenberger, A grain boundary engineering approach to materials reliability, in: C.L. Briant, C.B. Carter, E.L. Hall (Eds.), Interfacial Engineering for Optimized Properties, Materials Research Society, Pittsburgh, PA, 458, 1997, pp. 273-282.
92. U. Erb, G. Palumbo, R. Zugic, K.T. Aust, Structure-properties relationships for electrodeposited nanocrystals, in: S. Suryanarayana (Ed.), Processing and Properties of Nanocrystalline Materials, The Minerals, Metals, and Materials Society, Pittsburgh, PA, 1996, pp. 93-110.
93. Palumbo G., Erb U., Aust K.T. Scripta Metall. Mater. 24:1990;2347-2350.
94. Palumbo G., Thorpe S.J., Aust K.T. Scripta Metall. Mater. 24:1990;1347-1350.
95. D.C. Chrzan, Dynamic Scaling Theories: Applications to Dislocation Dynamics, presented at the conference on Multi-Scale Modeling of Polycrystal Plasticity, in La Jolla, CA, April 11, 1997.
96. Paidar V., Pope D.P., Vitek V. Acta Metall. 32:1984;435-448.
97. Chrzan D.C., Mills M.J. Phys. Rev. B 50:1994;30-42.
98. Chrzan D.C., Daw M.S. Phys. Rev. B 55:1997;798-811.
99. Hughes D.A., Liu Q., Chrzan D.C., Hansen N. Acta. Mater. 45:1997;105-112.
100. Amodeo R.J., Ghoniem N.M. Res. Mechanica. 23:1988;137-160.
101. N.M. Ghoniem, R.J. Amodeo, Solid State Phenomena 3-4 (1988) 377-388.
102. Amodeo R.J., Ghoniem N.M. Phys. Rev. B 41:1990;6958-6967.
103. Amodeo R.J., Ghoniem N.M. Phys. Rev. B 41:1990;6968-6976.
104. N. Ghoniem, Dislocation Dynamics Methodology for Localized Micro-Scale Plasticity, presented at the conference on Multi-Scale Modeling of Polycrystal Plasticity, in La Jolla, CA, April 10, 1997.
105. H. Zbib, Dislocations Patterning and Plastic Deformation: A Microscopic Numerical Model, presented at the conference on Multi-Scale Modeling of Polycrystal Plasticity, in La Jolla, CA, April 10, 1997.
106. H. Zbib, M. Rhee, J. Hirth, Int. J. Mech. Sci. 40 (1998) 113-127.
107. Hirth J., Rhee M., Zbib H. J. Computer-aided Mater. Des. 3:1996;164-166.
108. H. Zbib, M. Rhee, J. Hirth, 3-D simulation of curved dislocations: discretization and long range interactions, in: Abe Tsuta, T. Tsuta (Eds.), Advances in Engineering Plasticity and its Applications, Elsevier, New York, 1996, pp. 15-20.
109. D. Raabe, On Some Physical Foundations of Microstructure Simulation, Part I: Introduction of a Hybrid Model for 3-D Dislocation Dynamics Simulations at the Nanoscale, Part II: On the Combination of Microstructure Mechanics with 3-D Cellular Automaton Simulations of Recrystallization Phenomena at the Mesoscale, presented at the conference on Multi-Scale Modeling of Polycrystal Plasticity, in La Jolla, CA, April 10, 1997.
110. Raabe D. Model. Sim. Mat. Sci. Eng. 3:1995;655-664.
111. Raabe D. Z. Metallkd. 87:1996;493-497.
112. Nabarro F.R.N. Proc. Phys. Soc. 59:1947;256.
113. J.R. Willis, Stability of Discrete Peierls-Type Models of Dislocations in Two and Three Dimensions, presented at the conference on Multi-Scale Modeling of Polycrystal Plasticity, in La Jolla, CA, April 11, 1997.
114. R. Peierls, Proc. Phys. Soc. 52 (1940).
115. A.B. Movchan, R. Bullough, J.R. Willis, Eur. J. Appl. Math. (in press).
116. Vítek V. Cryst. Latt. Def. 5:1974;1-34.
117. Xu W., Moriarty J.A. Phys. Rev. B 54:1996;6941.
118. C.L. Briant, Experimental Studies of Dislocation Structure in BCC and FCC Metals, presented at the conference on Multi-Scale Modeling of Polycrystal Plasticity, in La Jolla, CA, April 10, 1997.
119. C.L. Briant, R.H. Batcheler, D.H. Lassila, W. Gourdin, The microstructure of Ta and Ta-W alloys deformed at low and high strain rates, in: E. Chen, A. Crowson, E.J. Laveria, W. Ebihara, P. Kumar (Eds.), Tantalum, TMS, Warrendale, PA, 1997, pp. 191-204.
120. W. Gourdin, D.H. Lassila, Multiple mechanisms of thermally activated plastic flow in shocked and unshocked tantalum, in: E. Chen, A. Crowson, E.J. Laveria, W. Ebihara, P. Kumar (Eds.), Tantalum, TMS, Warrendale, PA, 1997, pp. 219-223.
121. D.A. Hughes, Deformation microstructures in refractory metals and alloys: past and present research, in: E.N.C. Dalder, T. Grobstein, C.S. Olsen (Eds.), Evolution of Refractory Metals and Alloys, TMS, Warrendale, PA, 1994, pp. 219-235.
122. Vandermeer R.A., Snyder J.W.B. Metall. Trans. A. 24A:1979;1031-1044.
123. F.C. Frank, Report of the symposium on the plastic deformation of crystalline metals, Carnegie Institute of Technology, Pittsburgh, PA, 1950, p. 150.
124. J.W. Morris Jr., The Importance of Inhomogeneities in Plastic Deformation, presented at the conference on Multi-Scale Modeling of Polycrystal Plasticity, in La Jolla, CA, April 10, 1997.
125. Frear D., Grivas D., Morris J.W. Jr. J. Elect. Mater. 18:1989;671-680.
126. J.W. Morris Jr., H.L. Reynolds, The influence of microstructure on the failure of eutectic solders, in: R.K. Mahidara, D.R. Frear, S.M.L. Sastry, K.L. Murty, P.K. Liaw, W.L. Winterbottom (Eds.), Design and Reliability of Solders and Solder Interconnects, TMS, Warrendale, PA, 1997, p. 49-58.
127. Chu D., Morris J.W. Jr. Acta. Mater. 44:1996;2599-2610.
128. G.E. Dieter, Mechanical Metallurgy, McGraw-Hill, New York, NY 1976, p. 774.
129. K. Sato, J. Chan, J.W. Morris Jr., (unpublished research).
130. Handerhan K.J., Garrison W.M., Moody N.R. N. Metall. Trans. A. 20A:1989;105-123.
131. P. Gumbsch, Atomistic Input to the Dislocation Dynamics at Crack Tips, presented at the conference on Multi-Scale Modeling of Polycrystal Plasticity, in La Jolla, CA, April 11, 1997.
132. Daw M.S., Foiles S.M., Baskes M.I. Mater. Sci. Rep. 9:1993;251-310.
133. J.A. Moriarty, Atomistic Simulations for Multiscale Modeling in BCC Metals, presented at the conference on Multi-Scale Modeling of Polycrystal Plasticity, in La Jolla, CA, April 11, 1997.
134. Moriarty J.A. Phys. Rev. B 42:1990;1609-1628.
135. Campbell G.H., Foiles S.M., Gumbsch P., Rühle M., King W.E. Phys. Rev. Lett. 70:1993;449-452.
136. W. Xu, J.A. Moriarty, Comp. Mater. Sci. Eng. 9 (1998) 348-356.
137. E.B. Tadmor, Bridging the Atomistic and Continuum Scales, presented at the conference on Multi-Scale Modeling of Polycrystal Plasticity, in La Jolla, CA, April 11, 1997.
138. Tadmor E.B., Ortiz M., Phillips R. Philos. Mag. A 73:1996;1529-1563.
139. Ortiz M. Comput. Mech. 18:1996;321-338.
140. S.M. Foiles, Dislocations and Impurities at Grain Boundaries: Comparison of Atomistic and Continuum Results, presented at the conference on Multi-Scale Modeling of Polycrystal Plasticity, in La Jolla, CA, April 11, 1997.
141. Naghdi P.M. J. Appl. Math. Phys. 41:1990;315-394.