Quasi-static axial crush response of a thin-wall, stainless steel box component

International Journal of Solids and Structures

Volumn 41, Issue 14, 2004, Pages 3707-3733

  DiPaolo, B P ^a   Monteiro, P J M ^b   Gronsky, R ^c  

^a US ARMY ENGINEER RESEARCH AND DEVELOPMENT CENTER   (United States)

^b Berkeley   (United States)

^c UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

Axial crush; Collapse initiators; Energy absorption; Progressive collapse; Stainless steel; Thin wall box components

Indexed keywords

ALLOYS; COMPOSITION; ENERGY ABSORPTION; MACHINING; MICROSTRUCTURE; PRODUCTION; WELDS;

AISI 304 STAINLESS STEEL; CONFIGURATION RESPONSE; QUASI-STATIC AXIAL CRUSHES; STAINLESS STEEL BOXES;

STAINLESS STEEL;

CRUSHING; STEEL;

EID: 2442696793     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijsolstr.2004.02.031     Document Type: Article

References (67)

1. Abah L. Limam A. Dejeammes M. Effects of cutouts on static and dynamic behaviour of square aluminium extrusions Jones N. Talaslidis D.G. Brebbia C.A. Manolis G.D. Structures Under Shock and Impact V--SUSI 98 1998 133-142 Computational Mechanics Publications Southampton, UK
2. Abramowicz W. Jones N. Dynamic axial crushing of square tubes International Journal of Impact Engineering 2 2 1984 179-208
3. Abramowicz W. Jones N. Dynamic progressive buckling of circular and square tubes International Journal of Impact Engineering 4 4 1986 243-270
4. Abramowicz W. Jones N. Transition from initial global bending to progressive buckling of tubes loaded statically and dynamically International Journal of Impact Engineering 19 5-6 1997 415-437
5. Abramowicz W. Wierzbicki T. A kinematic approach to crushing of shell structures Record of Conference Papers--Annual Petroleum and Chemical Industry Conference--International Conference on Vehicle Structural Mechanics, 3rd, October 10-12, 1979, Troy, MI, P-83 (790992) 1979 211-223 Society of Automotive Engineers Warrendale, PA
6. Andrews K.R.F. England G.L. Ghani E. Classification of the axial collapse of cylindrical tubes under quasi-static loading International Journal of Mechanical Sciences 25 9-10 1983 687-696
7. Angel T. Formation of martensite in austenitic stainless steels--effects of deformation, temperature, and composition Journal of the Iron and Steel Institute May 1954 402-412
8. ASTM Designation: A 666-99, 2000. Standard specification for annealed or cold-worked austenitic stainless steel sheet, strip, plate, and flat bar. Annual Book of ASTM Standards 2000, Section 1, Iron and Steel Products, Volume 01.03, Steel--Plate, Sheet, Strip, Wire; Stainless Steel Bar. ASTM, West Conshohocken, PA, 360-366
9. ASTM Designation: E8-96 a, 1997. Standard Test Methods for Tension Testing of Metallic Materials, Annual Book of ASTM Standards 1997, Section 3, Metals, Test Methods and Analytical Procedures, Volume 03.01, Metals--Mechanical Testing; Elevated and Low Temperature Tests; Metallography. ASTM, West Conshohocken, PA, 56-76
10. Bleich F. Buckling Strength of Metal Structures 1952 McGraw-Hill Book Company, Inc. New York, NY
11. Buehler Consumables Buyer's Guide, 1999. Buehler Ltd., Lake Bluff, IL, USA
12. Chou C.C. The measurement of impact forces under dynamic crush using a drop tower test facility International Congress and Exposition February 28-March 4, 1983, Detroit, MI (830467) 1983 1-16 Society of Automotive Engineers Warrendale, PA
13. Coppa A.P. New ways to soften shock Machine Design March 28 1968 130-140
14. DiPaolo, B.P., 1992. An experimental and analytical investigation of the axial crush of an aluminum box section. Unpublished M.S. Thesis, Department of Civil Engineering, School of Engineering, University of Pittsburgh, Pittsburgh, PA
15. DiPaolo, B.P., 2000. An experimental investigation on the axial crush of a thin-walled, stainless steel box component. Ph.D. Dissertation, Department of Civil and Environmental Engineering, College of Engineering, University of California, Berkeley, CA
16. Ezra A.A. Fay R.J. An assessment of energy absorbing devices for prospective use in aircraft impact situations Herrmann G. Perrone N. Dynamic Response of Structures--Proceedings of a Symposium June 28 and 29, 1971, Stanford, CA 1972 225-246 Pergamon Press New York
17. Foreman, E.A., 1999. (November 19). Laboratory certificate number 5003.1578. FTI Anamet, Hayward, CA, USA
18. Gray R.J. Holbert R.K. Thrasher T.H. Microstructural analysis for series 300 stainless steel sheet welds and tensile samples Northwood D.O. White W.E. Vander Voort G.F. Proceedings of the Sixteenth Annual Technical Meeting of the International Metallographic Society--Corrosion, Microstructure and Metallography Microstructural Science vol. 12 1985 345-370 ASM International Materials Park, OH
19. Griffiths A.J. Wright J.C. Mechanical properties of austenitic and metastable stainless steel sheet and their relationships with pressforming behaviour Stainless Steels--Proceedings of the Conference on Stainless Steels for the Fabricator and User September 10-12, 1968, Birmingham, UK, 117 1969 51-65 Staples Printers Limited for The Iron and Steel Institute London
20. Grimm T.R. Johnson D.M. Kajander J.E. Viegelahn G.L. An Investigation of the Crush Characteristics of Flanged Sheet Metal Columns (880904) 1988 Society of Automotive Engineers Warrendale, PA
21. Gupta N.K. Gupta S.K. Effect of annealing, size and cut-outs on axial collapse behaviour of circular tubes International Journal of Mechanical Sciences 35 7 1993 597-613
22. Hecker S.S. Stout M.G. Staudhammer K.P. Smith J.L. Effects of strain state and strain rate on deformation-induced transformation in 304 stainless steel: Part I. Magnetic measurements and mechanical behavior Metallurgical Transactions A 13 April 1982 619-626
23. Hordijk W. Written Communication 2003 Phoenix Tube Co., Inc. Bethlehem, PA, USA
24. Horton W.H. Bailey S.C. Edwards A.M. Nonsymmetric buckle patterns in progressive plastic buckling Experimental Mechanics September 1966 433-444
25. Johnson W. Reid S.R. Metallic Energy Dissipating Systems Applied Mechanics Reviews 31 3 1978 277-288
26. Johnson W. Soden P.D. Al-Hassani S.T.S. Inextensional collapse of thin-walled tubes under axial compression Journal of Strain Analysis 12 4 1977 317-330
27. Jones N. Structural Impact 1997 Cambridge University Press Cambridge, UK
28. Kindervater, C., 1981. Quasi-static and dynamic crushing of energy absorbing materials and structural components with the aim of improving helicopter crashworthiness. In: Seventh European Rotorcraft and Powered Lift Aircraft Forum (66), September 8-11, 1981, Stuttgart, Germany, pp. 1-26
29. Lampinen B.E. Jeryan R.A. Effectiveness of Polyurethane Foam in Energy Absorbing Structures (820494) 1983 Society of Automotive Engineers Warrendale, PA
30. Langseth M. Berstad T. Hopperstad O.S. Clausen A.H. Energy absorption in axially loaded square thin-walled aluminium extrusions Bulson P.S. Structures Under Shock and Impact III--Proceedings of the Third International Conference SUSI/94, 1st-3rd June, 1994, Madrid, Spain 1994 401-410 Computational Mechanics Publications Southampton, UK
31. Logan, R.W., Burger, M.J., McMichael, L.D., Parkinson, R.D., 1993. Crashworthiness analysis using advanced material models in Dyna3D. In: Crashworthiness and Occupant Protection in Transportation Systems 1993--The 1993 ASME Winter Annual Meeting, November 28-December 3, 1993, New Orleans, LA, AMD169/BED 25. The American Society of Mechanical Engineers, New York, pp. 127-136
32. Macaulay M.A. Redwood R.G. Small scale model railway coaches under impact Engineer 218 1964 1041-1046
33. Magee C.L. Thornton P.H. Design Considerations in Energy Absorption by Structural Collapse (780434) 1979 Society of Automotive Engineers Warrendale, PA
34. Mahmood H.F. Paluszny A. Design of thin walled columns for crash energy management--their strength and mode of collapse Proceedings of Fourth International Conference on Vehicle Structural Mechanics (811302) 1981 7-18 Society of Automotive Engineers Warrendale, PA
35. Mahmood H.F. Paluszny A. Stability of plate-type box columns under crush loading Kamal M.M. Wolf J.A. Computational Methods in Ground Transportation Vehicles--The Winter Annual Meeting of the American Society of Mechanical Engineers November 14-19, 1982, Phoenix, AZ 1982 17-33 American Society of Mechanical Engineers New York
36. Mallock A. Note on the instability of tubes subjected to end pressure, and on the folds in a flexible material Proceedings of the Royal Society A 81 December 1908 388-393
37. Mamalis A.G. Johnson W. The quasi-static crumpling of thin-walled circular cylinders and frusta under axial compression International Journal of Mechanical Sciences 25 9-10 1983 713-732
38. Mamalis A.G. Johnson W. Viegelahn G.L. The crumpling of steel thin-walled tubes and frusta under axial compression at elevated strain-rates: some experimental results International Journal of Mechanical Sciences 26 11/12 1984 537-547
39. Mamalis A.G. Viegelahn G.L. Manolakos D.E. Johnson W. Experimental investigation into the axial plastic collapse of steel thin-walled grooved tubes International Journal of Impact Engineering 4 2 1986 117-126
40. Mamalis A.G. Manolakos D.E. Viegelahn G.L. The axial crushing of thin PVC tubes and frusta of square cross-section International Journal of Impact Engineering 8 3 1989 241-264
41. Marshall N.S. Nurick G.N. The effect of induced imperfections on the formation of the first lobe of symmetric progressive buckling of thin-walled square tubes Jones N. Talaslidis D.G. Brebbia C.A. Manolis G.D. Structures Under Shock and Impact V--SUSI 98 1998 155-168 Computational Mechanics Publications Southampton UK
42. McGregor I.J. Meadows D.J. Scott C.E. Seeds A.D. Impact performance of aluminium structures Jones N. Wierzbicki T. Structural Crashworthiness and Failure vol. 10 1993 385-421 Elsevier Applied Science London
43. Meng Q. Al-Hassani S.T.S. Soden P.D. Axial crushing of square tubes International Journal of Mechanical Sciences 25 9-10 1983 747-773
44. Ohkubo Y. Akamatsu T. Shirasawa K. Mean Crushing Strength of Closed-Hat Section Members (740040) 1974 Society of Automotive Engineers Warrendale, PA
45. Powell G.W. Marshall E.R. Backofen W.A. Strain hardening of austenitic stainless steel Transactions of the ASM 50 1958 478-497
46. Pugsley A. The crumpling of tubular structures under impact conditions Symposium on the Use of Aluminium in Railway Rolling Stock 1960 The Institution of Locomotive Engineers and the Aluminium Development Association London
47. Pugsley A. Macaulay M. The large-scale crumpling of thin cylindrical columns The Quarterly Journal of Mechanics and Applied Mathematics 13 Pt. 1 1960 1-9
48. Redwood R.G. On the buckling of thin walled tubes under axial impact Journal of the Royal Aeronautical Society 68 7 1964 418-419
49. Reid S.R. Reddy T.Y. Axially loaded metal tubes as impact energy absorbers Bevilacqua L. Feijoo R. Valid R. Inelastic Behaviour of Plates and Shells--International Union of Theoretical and Applied Mechanics (IUTAM) Symposium August 5-9, 1985, Rio de Janeiro, Brazil 1986 569-595 Springer-Verlag Berlin
50. Reid S.R. Reddy T.Y. Static and dynamic crushing of tapered sheet metal tubes of rectangular cross-section International Journal of Mechanical Sciences 28 9 1986 623-637
51. Reid S.R. Reddy T.Y. Gray M.D. Static and dynamic axial crushing of foam-filled sheet metal tubes International Journal of Mechanical Sciences 28 5 1986 295-322
52. Ren W. Mingbao H. Zhuping H. Qingchun Y. An experimental study on the dynamic axial plastic buckling of cylindrical shells International Journal of Impact Engineering 1 3 1983 249-256
53. Ryerson Stock List--Steel, Aluminum, Nickel, Plastics, Copper, Brass--Processing and Fabricating, 1991. Joseph T. Ryerson - Son, Inc., Chicago, USA
54. Singace A.A. Axial crushing analysis of tubes deforming in the multi-lobe mode International Journal of Mechanical Sciences 41 1999 865-890
55. Soden, P.D., Al-Hassani, S.T.S., Johnson, W., 1974. The Crumpling of Polyvinylchloride Tubes Under Static and Dynamic Axial Loads. Institute of Physics Conference Series No. 21, Oxford, 327-338
56. Tani M. Funahashi A. Energy absorption by the plastic deformation of body structural members SAE Congress and Exposition, Cobo Hall February 27-March 3, 1978, Detroit, MI (780368) 1978 1-12 Society of Automotive Engineers Warrendale, PA
57. Thornton P.H. Static and dynamic collapse characteristics of scale model corrugated tubular sections Transactions of the ASME--Journal of Engineering Materials and Technology 75 October 1975 357-362
58. Thornton P.H. Energy absorption by structural collapse in dual phase steel tubes Metallurgical Transactions A 10 August 1979 1199-1201
59. Thornton P.H. Magee C.L. The interplay of geometric and materials variables in energy absorption Transactions of the ASME--Journal of Engineering Materials and Technology 99 2 1977 114-120
60. Toda K. Gondoh H. Takechi H. Usuda M. Absorbed energy during compression and crushing of high strength steel sheets Metallurgical Transactions A 7 November 1976 1637-1642
61. VanKuren R.C. Scott J.E. Energy Absorption of High-Strength Steel Tubes Under Impact Crush Conditions (770213) 1978 Society of Automotive Engineers Warrendale, PA
62. Wierzbicki T. Abramowicz W. On the crushing mechanics of thin-walled structures Transactions of the ASME--Journal of Applied Mechanics 50 4a 1983 727-734
63. Wierzbicki T. Abramowicz W. The mechanics of deep plastic collapse of thin-walled structures Wierzbicki T. Jones N. Structural Failure vol. 9 1989 281-329 John Wiley New York
64. Wierzbicki T. Molnar C. Matolcsy M. Experimental-theoretical correlation of dynamically crushed components of bus frame structure 17th FISITA Congress (785124) 1978 1673-1685 Society of Automotive Engineers Warrendale, PA
65. Wong H.F. Rhodes J. Zaras J. Ujihashi S. Experimental investigation of static progressive crushing of closed-hat section members Gupta N.K. Plasticity and Impact Mechanics 1997 250-272 New Age International Ltd. New Delhi
66. Yamaguchi, S., Kato, H., Okazaki, T., 1985. Efficient energy absorption of automobile side rails. In: Tenth International Technical Conference on Experimental Safety Vehicles, July 1-4, 1985, Oxford, England. US Department of Transportation, National Highway Traffic Safety Administration, pp. 321-326
67. Yamaya, M., Tani, M., 1971 (June). Energy absorption by the plastic deformation of sheet metal columns with box-shaped cross section. Technical Review. Mitsubishi Heavy Industries, Ltd., pp. 59-66