Effects of the initial α-SiC content on the microstructure, mechanical properties, and permeability of macroporous silicon carbide ceramics

Journal of the European Ceramic Society

Volumn 32, Issue 6, 2012, Pages 1283-1290

  Eom, Jung Hye ^a   Kim, Young Wook ^a   Song, In Hyuck ^b  

^a University of Seoul   (South Korea)

^b Korea Institute of Material Science   (South Korea)

Author keywords

Mechanical properties; Microstructure final; Permeability; SiC; Sintering

Indexed keywords

EQUIAXED GRAINS; EQUIAXED MICROSTRUCTURES; MACRO POROUS SILICON; MACROPOROUS; MICROSTRUCTURE-FINAL; PHASE CONTENT; PORE GROWTH; SIC; SIC CERAMICS; SIC POWDER;

CERAMIC MATERIALS; GRAIN GROWTH; MECHANICAL PERMEABILITY; MECHANICAL PROPERTIES; PLATELETS; POWDERS; SINTERING; TEXTURES;

SILICON CARBIDE;

EID: 84856564266     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2011.11.040     Document Type: Article

References (51)

1. Kitaoka S., Matsushima Y., Chen C., Awaji H. Thermal cyclic fatigue behavior of porous ceramics for gas cleaning. J Am Ceram Soc 2004, 87(5):906-913.
2. Adler J. Ceram diesel particulate filter. Int J Appl Ceram Technol 2005, 2(6):429-439.
3. Wilkes T.E., Young M.L., Sepulveda R.E., Dunand D.C., Faber K.T. Composites by aluminum infiltration of porous silicon carbide derived from wood precursors. Scripta Mater 2006, 55:1083-1086.
4. Colombo R. Conventional and novel processing methods for cellular ceramics. Phil Trans R Soc A 2006, 364:109-124.
5. Nagano T., Sato K., Saitoh T., Iwamoto Y. Gas permeation properties of amorphous SiC membranes synthesized from polycarbosilane without oxygen-curing process. J Ceram Soc Jpn 2006, 114(6):533-538.
6. Wach R.A., Sugimoto M., Yoshikawa M. Formation of silicon carbide membrane by radiation curing of polycarbosilane an polyvinylsilane and its gas separation up to 250°C. J Am Ceram Soc 2007, 90(1):275-278.
7. 2 additives as sintering aids. J Mater Sci 2007, 42:4960-4966.
8. Vogt U.F., Gyorfy L., Herzog A., Graule T., Plesch G. Macroporous silicon carbide foams for porous burner applications and catalyst supports. J Phys Chem Solids 2007, 68:1234-1238.
9. Ding S., Zeng Y.P., Jiang D. Gas permeability behavior of mullite-bonded porous silicon carbide ceramics. J Mater Sci 2007, 42:7171-7175.
10. Fukushima M., Zhou Y., Yoshizawa Y.I., Hirao K. Water vapor corrosion behavior of porous silicon carbide membrane support. J Eur Ceram Soc 2008, 28:1043-1048.
11. Fukushima M., Zhou Y., Yoshizawa Y.I. Fabrication and microstructural characterization of porous silicon carbide with nano-sized powders. Mater Sci Eng B 2008, 148:211-214.
12. Park Y.H., Park J.S., Hinoki T., Kohyama A. Development of manufacturing method for NITE-porous SiC ceramics using decarburization process. J Eur Ceram Soc 2008, 28:657-661.
13. 3 additives. J Membrane Sci 2009, 339:78-84.
14. 2 addition on the properties of cordierite-bonded porous SiC ceramics. J Eur Ceram Soc 2009, 29:1795-1802.
15. Chae S.H., Kim Y.W., Song I.H., Kim H.D., Narisawa M. Porosity control of porous silicon carbide ceramics. J Eur Ceram Soc 2009, 29:2867-2872.
16. Colombo R., Mera G., Riedel R., Soraru G.D. Polymer-derived ceramics: 40 years of research and innovation in advanced ceramics. J Am Ceram Soc 2010, 93(7):1805-1837.
17. Fukushima M., Nakata M., Ohji T., Yoshizawa Y.I. Fabrication and properties of ultra highly porous silicon carbide by the gelation-freezing method. J Eur Ceram Soc 2010, 30:2889-2896.
18. Eom J.H., Kim Y.W. Effect of additives on mechanical properties of macroporous silicon carbide ceramics. Met Mater Int 2010, 16(3):399-405.
19. Kumar B.V.M., Kim Y.W. Processing of polysiloxane-derived porous ceramics: a review. Sci Tech Adv Mater 2010, 11:044303.
20. Locs J., Berzina-Cimdina L., Zhurinsh A., Loca D. Effect of processing on the microstructure and crystalline phase composition of wood derived porous SiC ceramics. J Eur Ceram Soc 2011, 31:183-188.
21. Yamane H., Shirai T., Morito H., Yamada T., Hasegawa Y., Ikeda T. Fabrication of porous SiC ceramics having pores shaped with Si grain templates. J Eur Ceram Soc 2011, 31:409-413.
22. Esposito L., Sciti D., Piancastelli A., Bellosi A. Microstructure and properties of porous β-SiC template from soft woods. J Eur Ceram Soc 2004, 24:533-540.
23. Mouazer R., Mullens S., Thijs I., Luyten J., Buekenhoudt A. Silicon carbide foams by polyurethane replica technique. Adv Eng Mater 2005, 7(12):1124-1128.
24. Streitwieser D.A., Popovska N., Gerhard H. Optimization of the ceramization process for the production of three-dimensional biomorphic porous SiC ceramics by chemical vapor infiltration (CVI). J Eur Ceram Soc 2006, 26:2381-2387.
25. Herzog A., Vogt U., Kaczmarek O., Klingner R., Richter K., Thoemen H. Porous SiC ceramics derived from tailored wood-based fiberboards. J Am Ceram Soc 2006, 89(5):1499-1503.
26. 3 addition on the properties of reaction-bonded porous SiC ceramics. Ceram Int 2006, 32:461-466.
27. Zhang Z., Wang F., Yu X., Wang Y., Yan Y., Li K., et al. Porous silicon carbide ceramics produced by a carbon foam derived from mixtures of mesophase pitch and Si particles. J Am Ceram Soc 2009, 92(1):260-263.
28. Jin Y.J., Kim Y.W. Low temperature processing of highly porous silicon carbide ceramics with improved flexural strength. J Mater Sci 2010, 45:282-285.
29. Biasetto L., Colombo P., Innocentini M.D.M., Mullens S. Gas permeability of microcellular ceramic foams. Ind Eng Chem Res 2007, 46:3366-3372.
30. Song I.H., Kwon I.M., Kim H.D., Kim Y.W. Processing of microcellular silicon carbide ceramics with a duplex pore structure. J Eur Ceram Soc 2010, 30:2671-2676.
31. Colombo P., Bernardo E., Biasetto L. Novel microcellular ceramics from a silicone resin. J Am Ceram Soc 2004, 87(1):152-154.
32. Eom J.H., Kim Y.W. Effect of template size on microstructure and strength of porous silicon carbide ceramics. J Ceram Soc Jpn 2008, 116(10):1159-1163.
33. Kim Y.W., Mitomo M., Emoto H., Lee J.G. Effect of initial α-phase content on microstructure and mechanical properties of sintered silicon carbide. J Am Ceram Soc 1998, 81(12):3136-3140.
34. Nader M., Aldinger F., Hoffmann M.J. Influence of the α/β-SiC phase transformation on microstructural development and mechanical properties of liquid phase sintered silicon carbide. J Mater Sci 1999, 34:1197-1204.
35. Strecker K., Ribeiro S., Oberacker R., Hoffmann M.J. Influence of microstructural variation on fracture toughness of LPS-SiC ceramics. Int J Ref Met Hard Mater 2004, 22:169-175.
36. Jones R.L., Rowcliffe D.J. Use of notched bend beams to measure the toughness of ceramics. Am Ceram Soc Bull 1979, 58(12):1195.
37. Kim Y.W., Mitomo M., Hirotsuru H. Microstructural development of silicon carbide containing large seed grains. J Am Ceram Soc 1997, 80(1):99-105.
38. Kim Y.W., Mitomo M. Fine-grained silicon carbide ceramics with oxynitride glass. J Am Ceram Soc 1999, 82(10):2731-2736.
39. Kim Y.W., Jin Y.J., Eom J.H., Song I.H., Kim H.D. Engineering porosity in silicon carbide ceramics. J Mater Sci 2010, 45:2808-2815.
40. Lin P.K., Tsai D.S. Preparation and analysis of a silicon carbide composite membrane. J Am Ceram Soc 1997, 80(2):365-372.
41. Eom J.H., Kim Y.W., Song I.H., Kim H.D. Microstructure and properties of porous silicon carbide ceramics fabricated by carbothermal reduction and subsequent sintering process. Mater Sci Eng A 2007, 464:129-134.
42. Roh M.H., Kim Y.W., Kim W., Nishimura T., Seo W.S., Ko S.I., et al. Effect of aluminum nitride-scandia content on the microstructural and mechanical properties of sintered silicon carbide ceramics. Met Mater Int 2009, 15(6):937-941.
43. Eom J.H., Kim Y.W., Song I.H., Kim H.D. Processing and properties of polysiloxane-derived porous silicon carbide ceramics using hollow microspheres as template. J Eur Ceram Soc 2008, 28:1029-1035.
44. Ding S., Zeng Y.P., Jiang D. Thermal shock resistance of in situ reaction bonded porous silicon carbide ceramics. Mater Sci Eng A 2006, 425:326-329.
45. Kumar B.V.M., Eom J.H., Kim Y.W., Song I.H., Kim H.D. Effect of aluminum hydroxide content on porosity and strength of porous mullite-bonded silicon carbide ceramics. J Ceram Soc Jpn 2011, 119(5):367-370.
46. Lee S.G., Kim Y.W., Mitomo M. Relationship between microstructure and fracture toughness of toughened silicon carbide ceramics. J Am Ceram Soc 2001, 84(6):1347-1353.
47. Kim J.Y., Kim Y.W., Mitomo M., Zhan G.D., Lee J.G. Microstructure and mechanical properties of α-silicon carbide sintered with yttrium-aluminum garnet and silica. J Am Ceram Soc 1999, 82(2):441-444.
48. Zhou Y., Hirao K., Toriyama M., Yamauchi Y., Kanzaki S. Effects of intergranular phase chemistry on the microstructure and mechanical properties of silicon carbide ceramics densified with rare-earth oxide and alumina additions. J Am Ceram Soc 2001, 84(7):1642-1644.
49. Lee S.G., Shim W.H., Kim J.Y., Kim Y.W., Kwon W.T. Effect of sintering-additive composition on fracture toughness of liquid-phase-sintered SiC ceramics. J Mater Sci Lett 2001, 20:143-146.
50. Deng Z.Y., She J., Inagaki Y., Yang J.F., Ohji T., Tanaka Y. Reinforcement by crack-tip blunting in porous ceramics. J Eur Ceram Soc 2004, 24:2055-2059.
51. Kaul V.S., Faber K.T., Sepulveda R., Arellano Lopez A.R., Martinez-Fernandez J. Precursor selection and its role in the mechanical properties of porous SiC derived from wood. Mater Sci Eng A 2006, 428:225-232.