Cyclic behaviour of structures under thermomechanical loadings: Application to exhaust manifolds

International Journal of Fatigue

Volumn 38, Issue , 2012, Pages 65-74

  Benoit, A ^a,b,c   Maitournam, M H ^c   Remy L ^b   Oger, F ^a  

^a CENTRO RICERCHE FIAT   (Italy)

^b PSL RESEARCH UNIVERSITY   (France)

^c LABORATOIRE DE MÉCANIQUE DES SOLIDES   (France)

Author keywords

Cyclic loading; Cyclic plasticity; Ratchetting; Shakedown; Thermomechanical fatigue

Indexed keywords

CYCLIC LOADINGS; CYCLIC PLASTICITY; RATCHETTING; SHAKEDOWN; THERMOMECHANICAL FATIGUE;

CYCLIC LOADS; ELASTICITY; FATIGUE TESTING;

LOADING;

EID: 84855999107     PISSN: 01421123     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijfatigue.2011.11.012     Document Type: Article

References (43)

1. K.L. Johnson The application of shakedown principles in rolling and sliding contact Eur J Mech A/Solids 11 1992 155 172 [Special issue]
2. Kapoor A, Johnson KL. Plastic ratchetting as a mechanism of erosive wear. Wear 1995;186-7 [8th International conference on erosion by liquid and solid impact, 1:86-91].
3. A. Kapoor, K.L. Johnson, and J.A. Williams A model of a mild ratchetting wear of metals Wear 200 1996 38 44
4. J.A. Williams, and The influence of repeated loading residual stresses and shakedown on the behaviour of tribological contacts Tribol Int 38 9 2005 786 797 (Pubitemid 41108365)
5. A. Constantinescu, K. Dang Van, and M.H. Maitournam A unified approach for high and low cycle fatigue based on shakedown concepts Fatigue Fract Engng Mater Struct 26 6 2003 561 568
6. M. Jabbado, and M.H. Maitournam A high-cycle fatigue life model for variable amplitude multiaxial loading Fatigue Fract Eng Mater Struct 31 2008 67 75
7. M.H. Maitournam, C. Krebs, and A. Galtier A multiscale fatigue life model for complex cyclic multiaxial loading Int J Fatigue 33 2011 2:232 240
8. Y. Liu, G. Kang, and Q. Gao Stress-based fatigue failure models for uniaxial ratchetting-fatigue interaction Int J Fatigue 30 6 2008 1065 1073 (Pubitemid 351374589)
9. G. Kang, Y. Liu, and J. Ding Multiaxial ratchetting-fatigue interactions of annealed and tempered 42CrMo steels: experimental observations Int J Fatigue 30 12 2008 2104 2118
10. D.L. McDowell, and F.P.E. Dunne Microstructure-sensitive computational modeling of fatigue crack formation Int J Fatigue 32 9 2010 1521 1542
11. D.L. McDowell Simulation-based strategies for microstructure-sensitive fatigue modeling Mater Sci Eng 468-70 2007 4 14 (Pubitemid 47300123)
12. A. Manonukul, and F.P.E. Dunne High- and low-cycle fatigue crack initiation using polycrystal plasticity Proc Roy Soc Lond Ser A - Math Phys Eng Sci 460 2047 2004 1881 1903 (Pubitemid 38822380)
13. R.P. Skelton, T. Vilhelmsen, and G.A. Webster Energy criteria and cumulative damage during fatigue crack growth Int J Fatigue 20 9 1998 641 649 (Pubitemid 128413101)
14. R.P. Skelton, and M.S. Loveday A re-interpretation of the BCR/VAMAS low cycle fatigue intercomparison programme using an energy criterion Mater High Temp 14 1 1997 53 68 (Pubitemid 127555351)
15. E. Charkaluk, and A. Constantinescu An energetic approach in thermomechanical fatigue for silicon molybdenum cast iron Mater High Temp 17 3 2000 1199 1206
16. E. Charkaluk, A. Bignonnet, A. Constantinescu, and K. Dang Van Fatigue design of structures under thermomechanical loadings Fatigue Fract Engng Mater Struct 25 2002 1199 1206
17. A. Constantinescu, E. Charkaluk, G. Lederer, and L. Verger A computational approach to thermomechanical fatigue Int J Fatigue 26 8 2004 805 818
18. J.L. Chaboche Continuum damage mechanics I: General concepts & II: Damage growth, crack initiation and crack growth J Appl Mech 55 1988 59 72
19. J.L. Chaboche, and P.M. Lesne A nonlinear continuous fatigue damage model Fatigue Fract Engrg Mater Struct 11 1 1988 1 17 (Pubitemid 18622571)
20. Lesne PM, Savalle S. An efficient cycles jump technique for viscoplastic structure calculations involving large numbers of cycles. In: 2nd International conference on computational plasticity, Barcelona; 1989. p. 591-602.
21. D. Cojocaru, and A.M. Karlsson A simple numerical method of cycle jumps for cyclically loaded structures Int J Fatigue 28 12 2006 1677 1689 (Pubitemid 44344322)
22. J.L. Chaboche, and G. Cailletaud Integration methods for complex plastic constitutive equations Comput Methods Appl Mech Eng 133 1996 125 155 (Pubitemid 126395558)
23. M.H. Maitournam, B. Pommier, and J.J. Thomas Determination of the asymptotic response of a structure under cyclic thermomechanical loading Comp Rend Mec 330 10 2002 703 708 (Pubitemid 35408150)
24. Nguyen-Tajan TML, Pommier B, Maitournam H, Houari M, Verger L, Du ZZ et al. Determination of the stabilized response of a structure undergoing cyclic thermal-mechanical loads by a direct cyclic method. In: ABAQUS users' conference proceedings; 2003.
25. M. Peigney, and C. Claude Stolz An optimal control approach to the analysis of inelastic structures under cyclic loading J Mech Phys Solids 51 4 2003 575 605
26. M.R. Begley, and J.W. Hutchinson Plasticity in fretting of coated substrates Eng Fract Mech 62 1999 145 164
27. J.M. Ambrico, and M.R. Begley Plasticity in fretting contact J Mech Phys Solids 48 2000 2391 2417
28. J.M. Ambrico, and M.R. Begley The role of macroscopic plastic deformation in fretting fatigue life predictions Int J Fatigue 23 2 2001 121 128 (Pubitemid 32093249)
29. B. Halphen, and Q.S. Nguyen Sur les matériaux standards généralisés J Méc 14 1 1975 39 63
30. P. Germain, Q.S. Nguyen, and P. Suquet Continuum thermodynamics J Appl Mech 50 4 1983 1010 1020
31. Armstrong PJ, Frederick CO. A mathematical representation of the multiaxial Bauschinger effect. CEGB Report No. RD/B/N 731, 1966.
32. J. Lemaitre, and J.L. Chaboche Mechanics of solid materials 1990 Cambridge Univeristy Press Cambridge
33. Q.S. Nguyen On shakedown analysis in hardening plasticity J Mech Phys Solids 51 2003 101 125
34. J.L. Chaboche Modeling of ratchetting: evaluation of various approaches Eur J Mech A/Solids 13 4 1994 501 518
35. N. Ohno Constitutive modeling of cyclic plasticity with emphasis on ratchetting Int J Mech Sci 40 1998 251 261 (Pubitemid 128391363)
36. M. Abdel-Karim, and N. Ohno Kinematic hardening model suitable for ratcheting with steady-state Int J Plast 16 2000 225 240 (Pubitemid 30564249)
37. G. Kang Ratchetting: Recent progresses in phenomenon observation, constitutive modeling and application Int J Fatigue 30 2008 1448 1472 (Pubitemid 351680480)
38. S. Pycko, and Z. Mroz Alternative approach to shakedown as a solution of min-max problem Acta Mech 93 1992 205 222
39. J. Mandel, J. Zarka, and B. Halphen Adaptation d'une structure élastoplastique à écrouissage cinématique Mech Res Commun 4 1977 309 314
40. I.V. Papadopoulos, P. Davoli, C. Gorla, M. Filippini, and A. Bernasconi A comparative study of multiaxial high-cycle fatigue criteria for metals Int J Fatigue 19 3 1997 219 235 (Pubitemid 127413485)
41. S. Amiable, S. Chapuliot, A. Constantinescu, and A. Fissolo A comparison of lifetime prediction methods for a thermal fatigue experiment Int J Fatigue 28 7 2006 692 706 (Pubitemid 43821209)
42. F. Szmytka, L. Rémy, H. Maitournam, A. Köster, and M. Bourgeois New flow rules in elasto-viscoplastic constitutive models for spheroidal graphite cast-iron Int J Plast 26 6 2009 905 924
43. Bucher L. Etude de l'endommagement en fatigue thermique des aciers inoxydables F17TNb et R20-12 pour application automobile. PhD thesis, Ecole Nationale Supérieure des Mines, Paris, 2004.