The effect of implant design on insertion torque and immediate micromotion

Clinical Oral Implants Research

Volumn 23, Issue 1, 2012, Pages 113-118

  Freitas Jr , Amilcar C ^a   Bonfante, Estevam A ^b   Giro, Gabriela ^c   Janal, Malvin N ^d   Coelho, Paulo G ^a  

^a NEW YORK UNIVERSITY   (United States)

^b UNIVERSITY OF SÃO PAULO   (Brazil)

^c SÃO PAULO STATE UNIVERSITY UNESP   (Brazil)

^d NEW YORK UNIVERSITY COLLEGE OF DENTISTRY   (United States)

Author keywords

Dental implant; Insertion torque; Micromotion; Osseointegration; Primary stability

Indexed keywords

POLYURETHAN;

ANALYSIS OF VARIANCE; ARTICLE; BONE REGENERATION; COMPARATIVE STUDY; DENTAL PROCEDURE; DENTAL SURGERY; MECHANICAL STRESS; METHODOLOGY; SURFACE PROPERTY; TOOTH IMPLANTATION; TOOTH PROSTHESIS; TORQUE;

ANALYSIS OF VARIANCE; DENTAL IMPLANTATION, ENDOSSEOUS; DENTAL IMPLANTS; DENTAL PROSTHESIS DESIGN; DENTAL PROSTHESIS RETENTION; DENTAL RESTORATION FAILURE; DENTAL STRESS ANALYSIS; OSSEOINTEGRATION; POLYURETHANES; STRESS, MECHANICAL; SURFACE PROPERTIES; TORQUE;

EID: 84155167465     PISSN: 09057161     EISSN: 16000501     Source Type: Journal    
DOI: 10.1111/j.1600-0501.2010.02142.x     Document Type: Article

References (34)

1. Abuhussein, H., Pagni, G., Rebaudi, A. & Wang, H.L. (2010) The effect of thread pattern upon implant osseointegration. Clinical Oral Implants Research21: 129-136.
2. Akca, K., Kokat, A.M., Comert, A., Akkocaoglu, M., Tekdemir, I. & Cehreli, M.C. (2010) Torque-fitting and resonance frequency analyses of implants in conventional sockets versus controlled bone defects in vitro. The International Journal of Oral and Maxillofacial Surgery39: 169-173.
3. Akkocaoglu, M., Cehreli, M.C., Tekdemir, I., Comert, A., Guzel, E., Dagdeviren, A. & Akca, K. (2007) Primary stability of simultaneously placed dental implants in extraoral donor graft sites: a human cadaver study. Journal of Oral and Maxillofacial Surgery65: 400-407.
4. Akkocaoglu, M., Uysal, S., Tekdemir, I., Akca, K. & Cehreli, M.C. (2005) Implant design and intraosseous stability of immediately placed implants: a human cadaver study. Clinical Oral Implants Research16: 202-209.
5. Annual Book of ASTM Standards. (2003) Medical devices and services 13.01. Pennsylvania: ASTM International.
6. Atieh, M.A., Atieh, A.H., Payne, A.G. & Duncan, W.J. (2009) Immediate loading with single implant crowns: a systematic review and meta-analysis. International Journal of Prosthodontics22: 378-387.
7. Bardyn, T., Gedet, P., Hallermann, W. & Buchler, P. (2009) Quantifying the influence of bone density and thickness on resonance frequency analysis: an in vitro study of biomechanical test materials. The International Journal of Oral and Maxillofacial Implants24: 1006-1014.
8. Battula, S., Schoenfeld, A., Vrabec, G. & Njus, G.O. (2006) Experimental evaluation of the holding power/stiffness of the self-tapping bone screws in normal and osteoporotic bone material. Clinical Biomechanics (Bristol, Avon)21: 533-537.
9. Branemark, P.I., Adell, R., Breine, U., Hansson, B.O., Lindstrom, J. & Ohlsson, A. (1969) Intra-osseous anchorage of dental prostheses. I. Experimental studies. Scandinavian Journal of Plastics and Reconstructive Surgery3: 81-100.
10. Branemark, P.I., Hansson, B.O., Adell, R., Breine, U., Lindstrom, J., Hallen, O. & Ohman, A. (1977) Osseointegrated implants in the treatment of the edentulous jaw. Experience from a 10-year period. Scandinavian Journal of Plastics and Reconstructive Surgery Supplement16(Suppl.): 1-132.
11. Cameron, H.U., Pilliar, R.M. & MacNab, I. (1973) The effect of movement on the bonding of porous metal to bone. Journal of Biomedical Materials Research7: 301-311.
12. Cameron, H., Macnab, I. & Pilliar, R. (1972) Porous surfaced vitallium staples. South African Journal of Surgery10: 63-70.
13. Chuang, S.K., Tian, L., Wei, L.J. & Dodson, T.B. (2001) Kaplan-meier analysis of dental implant survival: a strategy for estimating survival with clustered observations. Journal of Dental Research80: 2016-2020.
14. Cochran, D.L., Schenk, R.K., Lussi, A., Higginbottom, F.L. & Buser, D. (1998) Bone response to unloaded and loaded titanium implants with a sandblasted and acid-etched surface: a histometric study in the canine mandible. Journal of Biomedical Materials Research40: 1-11.
15. Coelho, P.G., Granjeiro, J.M., Romanos, G.E., Suzuki, M., Silva, N.R., Cardaropoli, G., Thompson, V.P. & Lemons, J.E. (2009) Basic research methods and current trends of dental implant surfaces. Journal of Biomedical Materials Research Part B: Applied Biomaterials88: 579-596.
16. Coelho, P.G., Suzuki, M., Guimaraes, M.V., Marin, C., Granato, R., Gil, J.N. & Miller, R.J. (2010) Early bone healing around different implant bulk designs and surgical techniques: a study in dogs. Clinical Implant Dentistry and Related Research12: 202-208.
17. da Cunha, H.A., Francischone, C.E., Filho, H.N. & de Oliveira, R.C. (2004) A comparison between cutting torque and resonance frequency in the assessment of primary stability and final torque capacity of standard and tiunite single-tooth implants under immediate loading. The International Journal of Oral & Maxillofacial Implants19: 578-585.
18. Engelke, W., Decco, O.A., Rau, M.J., Massoni, M.C. & Schwarzwaller, W. (2004) In vitro evaluation of horizontal implant micromovement in bone specimen with contact endoscopy. Implant Dentistry13: 88-94.
19. Friberg, B., Sennerby, L., Grondahl, K., Bergstrom, C., Back, T. & Lekholm, U. (1999) On cutting torque measurements during implant placement: a 3-year clinical prospective study. Clinical Implant Dentistry and Related Research1: 75-83.
20. Gotfredsen, K., Wennerberg, A., Johansson, C., Skovgaard, L.T. & Hjorting-Hansen, E. (1995) Anchorage of tio2-blasted, ha-coated, and machined implants: an experimental study with rabbits. Journal of Biomedical Materials Research29: 1223-1231.
21. Jasty, M., Bragdon, C., Burke, D., O'Connor, D., Lowenstein, J. & Harris, W.H. (1997) In vivo skeletal responses to porous-surfaced implants subjected to small induced motions. The Journal of Bone and Joint Surgery79: 707-714.
22. Javed, F. & Romanos, G.E. (2010) The role of primary stability for successful immediate-loading of dental implants. A literature review. Journal of Dentistry38: 612-620.
23. Kahraman, S., Bal, B.T., Asar, N.V., Turkyilmaz, I. & Tozum, T.F. (2009) Clinical study on the insertion torque and wireless resonance frequency analysis in the assessment of torque capacity and stability of self-tapping dental implants. Journal of Oral Rehabilitation36: 755-761.
24. Lekholm, U. & Zarb, G.A. (1985) Patient selection and preparation. In: Quintessence International ed. Tissue-integrated prostheses: osseointegration in clinical dentistry, 199-209. Chicago: Quintessence.
25. Niimi, A., Ozeki, K., Ueda, M. & Nakayama, B. (1997) A comparative study of removal torque of endosseous implants in the fibula, iliac crest and scapula of cadavers: preliminary report. Clinical Oral Implants Research8: 286-289.
26. O'Sullivan, D., Sennerby, L. & Meredith, N. (2000) Measurements comparing the initial stability of five designs of dental implants: a human cadaver study. Clinical Implant Dentistry and Related Research2: 85-92.
27. Ottoni, J.M., Oliveira, Z.F., Mansini, R. & Cabral, A.M. (2005) Correlation between placement torque and survival of single-tooth implants. The International Journal of Oral & Maxillofacial Implants20: 769-776.
28. Pilliar, R.M., Lee, J.M. & Maniatopoulos, C. (1986) Observations on the effect of movement on bone ingrowth into porous-surfaced implants. Clinical Orthopaedics and Related Research208: 108-113.
29. Schnitman, P.A., Wohrle, P.S., Rubenstein, J.E., DaSilva, J.D. & Wang, N.H. (1997) Ten-year results for branemark implants immediately loaded with fixed prostheses at implant placement. The International Journal of Oral & Maxillofacial Implants12: 495-503.
30. Szmukler-Moncler, S., Piattelli, A., Favero, G.A. & Dubruille, J.H. (2000) Considerations preliminary to the application of early and immediate loading protocols in dental implantology. Clinical Oral Implants Research11: 12-25.
31. Szmukler-Moncler, S., Salama, H., Reingewirtz, Y. & Dubruille, J.H. (1998) Timing of loading and effect of micromotion on bone-dental implant interface: review of experimental literature. Journal of Biomedical Materials Research43: 192-203.
32. Tabassum, A., Meijer, G.J., Wolke, J.G. & Jansen, J.A. (2010) Influence of surgical technique and surface roughness on the primary stability of an implant in artificial bone with different cortical thickness: a laboratory study. Clinical Oral Implants Research21: 213-220.
33. Trisi, P., Perfetti, G., Baldoni, E., Berardi, D., Colagiovanni, M. & Scogna, G. (2009) Implant micromotion is related to peak insertion torque and bone density. Clinical Oral Implants Research20: 467-471.
34. Turkyilmaz, I., Sennerby, L., McGlumphy, E.A. & Tozum, T.F. (2009) Biomechanical aspects of primary implant stability: a human cadaver study. Clinical Implant Dentistry and Related Research11: 113-119.