The effect of loading rates and particle geometry on compressive properties of polypropylene/zinc oxide nanocomposites: Experimental and numerical prediction

Polymer Composites

Volumn 33, Issue 1, 2012, Pages 99-108

  Omar, Mohd Firdaus ^a,b   Akil, Hazizan Md ^a   Ahmad, Zainal Arifin ^a   Mahmud, Shahrom ^a  

^a SCHOOL OF PHYSICS   (Malaysia)

^b UNIVERSITY MALAYSIA PERLIS   (Malaysia)

Author keywords

[No Author keywords available]

Indexed keywords

COMPRESSIVE PROPERTIES; DISSIPATION ENERGY; DYNAMIC LOADINGS; LOADING RATE; NUMERICAL PREDICTIONS; NUMERICAL RESULTS; PARTICLE GEOMETRIES; SPLIT HOPKINSON PRESSURE BARS; STATIC LOADING; STRAIN RATE SENSITIVITY; STRENGTH PROPERTY; UNIVERSAL TESTING MACHINES; YIELD STRAIN;

DYNAMIC LOADS; FILLED POLYMERS; GEOMETRY; LOADING; MECHANICAL TESTING; NANOCOMPOSITES; POLYMER MATRIX COMPOSITES; YIELD STRESS;

STRAIN RATE;

EID: 83955161056     PISSN: 02728397     EISSN: 15480569     Source Type: Journal    
DOI: 10.1002/pc.21253     Document Type: Article

References (44)

1. B. Alcock, N.O. Cabrera, N.M. Barkoula, A.B. Spoelstra, J. Loos, and, T. Peijs, Compos. Part A: Appl., 38, 147 (2007).
2. M.F. Omar, H.M. Akil, and, Z.A. Ahmad, Mater. Sci. Eng. A, 528, 1567 (2011).
3. P.W. Balasuriya, L. Ye, and, Y.W. Mai, Compos. Part A: Appl., 32, 619 (2001).
4. S. Jeong, S. Yeo, and, S. Yi, J. Mater. Sci., 40, 5407 (2005).
5. E. Thostenson, C. Li, and, T. Chou, Compos. Sci. Technol., 65, 491 (2005).
6. J. Cho, M. Joshi, and, C. Sun, Compos. Sci. Technol., 66, 1941 (2006).
7. K. Friedrich, Z. Zhang, and, A. Schlarb, Compos. Sci. Technol., 65, 2329 (2005).
8. I. Javni, W. Zhang, V. Karajkov, Z. Petrovic, and, V. Divjakovic, J. Cell. Plast., 38, 229 (2002).
9. D. Look, Mater. Sci. Eng. B, 80, 383 (2001).
10. E. Fortunato, P. Barquinha, A. Pimentel, A. Gonèalves, A. Marques, R. Martins, and, L. Pereira, Appl. Phys. Lett., 85, 2541 (2004).
11. H. Chiang, J. Wager, R. Hoffman, J. Jeong, and, D. Keszler, Appl. Phys. Lett., 86, 013503 (2005).
12. H. Cheng, C. Chen, and, C. Tsay, Appl. Phys. Lett., 90, 012113 (2007).
13. C. Huang, S. Chen, and, W. Wei, J. Appl. Polym. Sci., 102, 6009 (2006).
14. J. Tang, Y. Wang, H. Liu, and, L. Belfiore, Polymer 45, 2081 (2004).
15. N. Sanpo, Proceeding of the 2008 International Conference on BioMedical Engineering and Informatic. Washington. 488 (2008).
16. M. Shah, M. Al-Shahry, and, A. Asiri, Int. J. Nanopart, 2, 66 (2009).
17. J. Zhang, L. Sun, J. Yin, H. Su, C. Liao, and, C. Yan, Chem. Mater., 14, 4172 (2002).
18. C. Lu, and, C. Yeh, Ceram. Int., 26, 351 (2000).
19. H. Lin, Adv. Compos. Lett., 18, 77 (2009).
20. K. Nakai, and, T. Yokoyama, J. Solid Mech. Mater. Eng., 2, 557 (2008).
21. E. Davies, and, S. Hunter, J. Mech. Phys. Solids, 11, 155 (1963).
22. N. Dioh, P. Leevers, and, J. Williams, Polymer 34, 4230 (1993).
23. M.F. Omar, H. Md Akil, Z.A. Ahmad, A.A.M. Mazuki, and, T. Yokoyama, J. Mater. Des., 31, 4209 (2010).
24. X. Wu, and, D. Gorham, J. Phys. IV France Colloq. (DYMAT 97), 7, 91 (1997).
25. N. Naik, V. Ch, and, V. Kavala, Mater. Sci. Eng. A, 498, 87 (2008).
26. T. Gõmez-del Río, E. Barbero, R. Zaera, and, C. Navarro, Compos. Sci. Technol., 65, 61 (2005).
27. A. Mulliken, and, M. Boyce, Int. J. Solids Struct., 43, 1331 (2006).
28. Z. Stachurski, Prog. Polym. Sci., 22, 407 (1997).
29. Y. Guo, and, Y. Li, Mater. Sci. Eng. A, 458, 330 (2007).
30. S. Deschanel, B. Greviskes, K. Bertoldi, S. Sarva, W. Chen, S. Samuels, R. Cohen, and, M. Boyce, Polymer, 50, 227 (2009).
31. M.F. Omar, H.M. Akil, and, Z.A. Ahmad, Mater. Des., 32, 4207 (2011).
32. M.F. Omar, H.M. Akil, and, Z.A. Ahmad, Polym. Compos., 32, 565 (2011).
33. S. Chiou, W. Cheng, and, W. Lee, Mater. Sci. Eng. A, 392, 156 (2005).
34. F. Rietsch, and, B. Bouette, Eur. Polym. J., 26, 1071 (1990).
35. R. Walter, K. Friedrich, V. Privalko, and, A. Savadori, J. Adhesion, 64, 87 (1997).
36. S. Fu, X. Feng, B. Lauke, and, Y. Mai, Compos. Part B: Eng., 39, 933 (2008).
37. A. Kalendova, and, D. Vesely, Anti-Corros. Method M., 56, 84 (2009).
38. R. Picu, G. Vincze, F. Ozturk, J. Gracio, F. Barlat, and, A. Maniatty, Mater. Sci. Eng. A, 390, 334 (2005).
39. M. Malatynski, and, J. Klepaczko, Int. J. Mech. Sci., 22, 173 (1980).
40. Z. Li, and, J. Lambros, Int. J. Mech. Sci., 38, 3549 (2001).
41. F. Yi, Z. Zhu, F. Zu, S. Hu, and, P. Yi, Mater. Char., 47, 417 (2001).
42. S. Fu, and, Y. Wang, Polym. test., 28, 724 (2009).
43. J. Richeton, S. Ahzi, K. Vecchio, F. Jiang, and, R. Adharapurapu, Int. J. Solids Struct., 43, 2318 (2006).
44. J. Richeton, S. Ahzi, L. Daridon, and, Y. Rémond, Polymer 46, 6035 (2005).