Mahalanobis-Taguchi system as a multi-sensor based decision making prognostics tool for centrifugal pump failures

IEEE Transactions on Reliability

Volumn 60, Issue 4, 2011, Pages 864-878

  Soylemezoglu, Ahmet ^a   Jagannathan, Sarangapani ^a   Saygin, Can ^b  

^a Architectural and Environmental Engineering   (United States)

^b The University of Texas at San Antonio   (United States)

Author keywords

Centrifugal pump; fault isolation and prognostics; Mahalanobis distance based fault detection; Mahalanobis Taguchi system; real time decision making

Indexed keywords

CLUSTERING ANALYSIS; FAULT DETECTION AND ISOLATION; FAULT ISOLATION; FLOW-SENSORS; INDUSTRIAL ENVIRONMENTS; IS PROCESS; KEY PARAMETERS; LINEAR APPROXIMATIONS; MAHALANOBIS; MAHALANOBIS DISTANCES; MAHALANOBIS TAGUCHI SYSTEM; MAHALANOBIS-TAGUCHI SYSTEMS; MULTI SENSOR; MULTI VARIATE ANALYSIS; MULTIPLE SENSORS; OPERATING CONDITION; REAL TIME MONITORING; REAL-TIME DECISION MAKING; SYSTEM-LEVEL PERFORMANCE; TIME TO FAILURE; WATER PUMP;

CENTRIFUGAL PUMPS; CENTRIFUGATION; DECISION MAKING; EXPERIMENTS; MULTIVARIANT ANALYSIS; PUMPS; SENSOR NODES;

FAULT DETECTION;

EID: 82455212786     PISSN: 00189529     EISSN: None     Source Type: Journal    
DOI: 10.1109/TR.2011.2170255     Document Type: Article

References (37)

1. E. Lihovd, T. I. Johannessen, C. Steinebach, and M. Rasmussen, "Intelligent diagnosis and maintenance management" Journal of Intelligent Manufacturing, vol. 9, pp. 523-537, 1998.
2. H. Falkner and D. Reeves, Study on improving the energy efficiency of pump ETSU, AEAT PLC. SAVE Study, U.K., 2001.
3. R. K. Byskov, C. B. Jacobsen, and N. Pedersen, "Flow in a centrifugal pump impeller at design and off-design conditions-Part II: Large eddy simulations" Journal of Fluids Engineering, vol. 125, pp. 73-83, 2003.
4. O. Coutier-Delgosha, R. Fortes-Patella, J. L. Reboud, M. Hofmann, and B. Stoffel, "Experimental and numerical studies in a centrifugal pump with two-dimensional curved blades in cavitating condition" Journal of Fluids Engineering, vol. 125, pp. 970-978, 2003.
5. R. Hirschi, P. Dupont, F. Avellan, J. N. Favre, J. F. Guelich, and E. Parkinson, "Centrifugal pump performance drop due to leading edge cavitation: Numerical predictions compared with model tests" Journal of Fluids Engineering, vol. 120, pp. 705-711, 1998.
6. M. A. Langthjem and N. Olhoff, "A numerical study of flow-induced noise in a two-dimensional centrifugal pump. Part I. Hydrodynamics" Journal of Fluids and Structures, vol. 19, pp. 349-368, 2004.
7. R. B. Medvitz, R. F. Kunz, D. A. Boger, J. W. Lindau, A. M. Yocum, and L. L. Pauley, "Performance analysis of cavitating flow in centrifugal pumps using multiphase CFD" Journal of Fluids Engineering, vol. 124, pp. 377-383, 2002.
8. C. S. Byington, M.Watson, D. Edwards, and B. Dunkin, "In-line health monitoring system for hydraulic pumps and motors" in Aerospace Conference, 2003, pp. 3279-3287.
9. R. Dong, S. Chu, and J. Katz, "Effect of modification to tongue and impeller geometry on unsteady flow, pressure fluctuations, and noise in a centrifugal pump" Journal of Turbomachinery, vol. 119, pp. 506-515, 1997.
10. I. S. Koo and W. W. Kim, "The development of reactor coolant pump vibration monitoring and a diagnostic system in the nuclear power plant" ISA Transactions, vol. 39, pp. 309-316, 2000.
11. M. S. Lebold, K. Maynard, K. Reichard, M. Trethewey, J. Hasker, C. Lissenden, and D. Dobbins, "A non-intrusive technique for on-line shaft crack detection and tracking" in Aerospace Conference, 2005, pp. 1-11.
12. S. Perovic, P. J. Unsworth, and E. H. Higham, "Fuzzy logic system to detect pump faults from motor current spectra" in Industry Applications Conference, 2001. Thirty-Sixth IAS Annual Meeting. Conference Record of the 2001 IEEE, vol. 1, pp. 274-280.
13. N. R. Sakthivel, V. Sugumaran, and S. Babudevasenapati, "Vibration based fault diagnosis of monoblock centrifugal pump using decision tree" Expert Systems with Applications, vol. 37, pp. 4040-4049, 2010.
14. N. R. Sakthivel, V. Sugumaran, and B. B. Nair, "Comparison of decision tree-fuzzy and rough set-fuzzy methods for fault categorization of mono-block centrifugal pump" Mechanical Systems and Signal Processing, vol. 24, pp. 1187-1906, 2010.
15. S. Zhang, T. Asakura, X. Xu, and B. Xu, "Fault diagnosis system for rotary machine based on fuzzy neural networks" JSME, vol. 46, pp. 1035-1041, 2003.
16. G. Taguchi, S. Chowdury, and Y. Wu, The Mahalanobis Taguchi System. New York: McGraw Hill, 2001.
17. P. C. Mahalanobis, "On the generalized distance in statistics" in Proceedings, National Institute of Science of India, 1936, vol. 2, pp. 49-55.
18. G. Taguchi and R. Jugulum, The Mahalanobis-Taguchi Strategy -A Pattern Technology System. New York: John Wiley & Sons, 2002.
19. R. B. Chinnam, B. Rai, and N. Singh, "Tool-condition monitoring from degradation signals using Mahalanobis Taguchi System" in Robust Engineering, ASI's 20th Annual Symposium, 2004, presented at the.
20. H. Wang, C. Chiu, and C. Su, "Data classification using Mahalanobis Taguchi System" Journal of Chinese Institute of Industrial Engineers, vol. 21, pp. 606-618, 2004.
21. E. A. Cudney, K. Paryani, and K. M. Ragsdell, "Applying the Mahalanobis-Taguchi System to vehicle ride" Journal of Industrial and Systems Engineering, vol. 1, pp. 251-259, 2007.
22. E. A. Cudney, R. Jugulum, and K. Paryani, "Forecasting consumer satisfaction for vehicle ride using a multivariate measurement system" International Journal of Industrial and Systems Engineering, vol. 4, pp. 683-696, 2009.
23. C. R. Foster, R. Jugulum, and D. D. Frey, "Evaluating an adaptive One-Factor-At-a-Time search procedure within the Mahalanobis-Taguchi System" International Journal of Industrial and Systems Engineering, vol. 4, pp. 600-614, 2009.
24. M. Asada, "Wafer yield prediction by the Mahalanobis-Taguchi system" in Statistical Methodology, IEEE International Workshop on, 2001, pp. 25-28.
25. S. Hayashi, Y. Tanaka, and E. Kodama, "A new manufacturing control system using Mahalanobis distance for maximizing productivity" Semiconductor Manufacturing, IEEE Trans., vol. 15, pp. 442-446, 2002.
26. D. Mohan, C. Saygin, and J. Sarangapani, "Real-time detection of grip length deviation during pull-type fastening: A Mahalanobis-Taguchi System (MTS)-based approach" The International Journal of Advanced Manufacturing Technology, vol. 39, pp. 995-1008, 2008.
27. C. Saygin, D. Mohan, and J. Sarangapani, "Real-time detection of grip length during gastening of bolted joints: A Mahalanobis-Taguchi System (MTS)-based approach" Journal of Intelligent Manufacturing, vol. 21, pp. 377-392, 2010.
28. T. Dasgupta, "Integrating the improvement and the control phase of Six Sigma for categorical responses through application of Mahalanobis-Taguchi System MTS" International Journal of Industrial and Systems Engineering, vol. 4, pp. 615-630, 2009.
29. J. Srinivasaraghavan and V. Allada, "Application of mahalanobis distance as a lean assessment metric" The International Journal of Advanced Manufacturing Technology, vol. 29, pp. 1159-1168, 2006.
30. S. B. Kim, K.-L. Tsui, T. Sukchotrat, and V. C. P. Chen, "A comparison study and discussion of the Mahalanobis-Taguchi System" International Journal of Industrial and Systems Engineering, vol. 4, pp. 631-644, 2009.
31. E. A. Cudney, D. Drain, K. Paryani, and S. Naresh, "A comparison of the Mahalanobis-Taguchi System to a standard statistical method for defect detection" Journal of Industrial and Systems Engineering, vol. 2, pp. 250-258, 2009.
32. R. Jugulum, "Comparison between Mahalanobis-Taguchi System and Artificial Neural Networks" Journal of Quality Engineering Forum, vol. 10, pp. 60-73, 2002.
33. W. H. Woodall, R. Koudelik, K.-L. Tsui, S. B. Kim, Z. G. Stoumbos, and C. P. Carvounis, "A review and analysis of the Mahalanobis-Taguchi System" Technometrics, vol. 45, pp. 1-15, 2003.
34. C. T. Su and Y. H. Hsiao, "An Evaluation of the robustness of MTS for imbalanced data" IEEE Trans. Knowledge and Data Engineering, vol. 19, pp. 1321-1332, 2007.
35. T. Yang and Y.-T. Cheng, "The use of Mahalanobis-Taguchi System to improve flip-chip bumping height inspection efficiency" Microelectronics Reliability, vol. 50, pp. 407-414, 2010.
36. R. Isermann, Fault Diagnosis Systems: An Introduction from Fault Detection to Fault Tolerance. Berlin, Germany: Springer, 2005.
37. A. Soylemezoglu, "Sensor data-based decision making" Ph.D. Dissertation, Engineering Management and Systems Engineering, Missouri University of Science and Technology, Rolla, MO, 2010.