Adhesion analysis and dry machining performance of CVD diamond coatings deposited on surface modified WC-Co turning inserts

Journal of Materials Processing Technology

Volumn 212, Issue 2, 2012, Pages 523-533

  Gomez, Humberto ^a,e   Durham, Delcie ^a   Xiao, Xingcheng ^b   Lukitsch, Michael ^b   Lu, Ping ^c   Chou, Kevin ^c   Sachdev, Anil ^b   Kumar, Ashok ^a,d  

^a University of South Florida   (United States)

^b GENERAL MOTORS CORPORATION   (United States)

^c University of Alabama   (United States)

^d UNIVERSITY OF SOUTH FLORIDA   (United States)

^e UNIVERSIDAD DEL NORTE   (Colombia)

Author keywords

Adhesion; Diamond; Dry machining; Surface modification

Indexed keywords

ADHESION ANALYSIS; CATALYTIC EFFECTS; CEMENTED CARBIDE TOOLS; CEMENTED CARBIDES; CHEMICAL ETCHING; COATED TOOLS; CVD DIAMOND; CVD DIAMOND COATINGS; DIAMOND COATING; DRY CUTTING; DRY MACHINING; HIGH-SILICON ALUMINUM ALLOY; INTERFACIAL CHARACTERISTICS; MANUFACTURING CHAIN; MICROCRYSTALLINE DIAMOND; ROCKWELL INDENTATION; SURFACE CHARACTERISTICS; SURFACE PRE-TREATMENTS; SURFACE-MODIFIED; SYSTEMATIC STUDY; TOOL SURFACES; TURNING INSERTS;

ADHESION; ALUMINUM; ALUMINUM ALLOYS; CARBIDE TOOLS; CERIUM ALLOYS; CHEMICAL MODIFICATION; COATINGS; COBALT; DIAMOND CUTTING TOOLS; DIAMOND FILMS; DIAMONDS; ETCHING; RAMAN SPECTROSCOPY; SILICON ALLOYS; SURFACE TREATMENT; SYNTHETIC DIAMONDS; TUNGSTEN ALLOYS; TUNGSTEN CARBIDE;

ALUMINUM COATINGS;

EID: 81855201708     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmatprotec.2011.10.020     Document Type: Article

References (32)

1. D.P. Adler, W.W-S. Hii, D.J. Michalek, and J.W. Sutherland Examining the role of cutting fluids in machining and efforts to address associated environmental/health concerns Mach. Sci. Technol. 10 1 2006 23 58 (Pubitemid 43348674)
2. J.W. Ager, and M.D. Drory Quantitative measurement of residual biaxial stress by Raman spectroscopy in diamond grown on a Ti alloy by chemical vapor deposition Phys. Rev. B. 48 1993 2601 2607
3. K.-D. Bouzakis, A. Asimakopoulos, G. Skordaris, E. Pavlidou, and G. Erkens The inclined impact test: a novel method for the quantification of the adhesion properties of PVD films Wear 262 2007 1471 1478 (Pubitemid 46590276)
4. J.G. Buijnsters, P. Shankar, W.J.P. van Enckevort, J.J. Schermer, and J.J. ter Meulen Adhesion analysis of polycrystalline diamond films on molybdenum by means of scratch, indentation and sand abrasion testing Thin Solid Films 474 2005 186 196
5. Ch.-Ch. Chou, J.-W. Lee, and Y.-I. Chen Tribological and mechanical properties of HFCVD diamond-coated WC-Co substrates with different Cr interlayers Surface Coat. Technol. 203 2008 704 708
6. Y.K. Chou, R.G. Thompson, and A. Kumar CVD-diamond technologies for dry drilling applications Thin Solid Films 518 2010 7487 7491
7. G. Cristofanilli, R. Polini, and M. Barletta HF-CVD of diamond coatings onto fluidized bed (FB) treated CrN interlayers Thin Solid Films 519 2010 1594 1599
8. A. Delanoë, M. Bacia, E. Pauty, S. Lay, and C.H. Allibert Cr-rich layer at the WC/Co interface in Cr-doped WC-Co cermets: segregation or metastable carbide? J. Cryst. Growth 270 2004 219 227
9. D.M. Drory, D.B. Bogy, M.S. Donley, and J.E. Field Mechanical Behavior of Diamond and Other Forms of Carbon 1995 Materials Research Society Pittsburgh, PA
10. S. Gangopadhyay, R. Acharya, A.K. Chattopadhyay, and V.G. Sargade Effect of cutting speed and surface chemistry of cutting tools on the formation of BUL or BUE and surface quality of the generated surface in dry turning of AA6005 aluminum alloy Mach. Sci. Technol. 14 2010 208 223
11. O. Glozman, G. Halperin, I. Etsion, A. Berner, D. Shectman, G.H. Lee, and A. Hoffman Study of the wear behavior and adhesion of diamond films deposited on steel substrates by use of a Cr-N interlayer Diamond Relat. Mater. 8 1999 859 864 10.1016/S0925-9635(98)00321-5 (Pubitemid 29346372)
12. R. Haubner, and W. Kalss Diamond deposition on hardmetal substrates - comparison of substrate pre-treatments and industrial applications Int. J. Refract. Met. Hard Mater. 28 2010 475 483
13. J. Hu, Y.K. Chou, and R.G. Thompson Nanocrystalline diamond coating tools for machining high-strength Al alloys J. Refract. Met. Hard Mater. 26 2007 135 144
14. J. Hu, Y.K. Chou, F. Qin, R.G. Thompson, J. Burgess, and S. Street Characterizations of nano-crystalline diamond coating cutting tools Surface Coat. Technol. 202 2007 1113 1117 (Pubitemid 350082285)
15. A. Köpf, S. Feistritzer, and K. Udier Diamond coated cutting tools for machining of non-ferrous metals and fibre reinforced polymers Int. J. Refract. Met. Hard Mater. 24 2006 354 359
16. Y.S. Li, and A. Hirose The effects of substrate compositions on adhesion of diamond films deposited on Fe-base alloys Surf. Coat. Technol. 202 2007 280 287 (Pubitemid 47570930)
17. A.K. Mallik, S.R. Binu, L.N. Satapathy, C. Narayana, M.M. Seikh, S.A. Shivashankar, and S.K. Biswas Effect of substrate roughness on growth of diamond by hot filament CVD Bull. Mater. Sci. 33 2010 251 255
18. K. Mallika, and R. Komanduri Diamond coatings on cemented tungsten carbide tools by low-pressure microwave CVD Wear 224 1999 245 266 (Pubitemid 30102383)
19. K. Okada, T. Taniuchi, and T. Tanase Advances in Powder Metallurgy & Particulate Materials 1998 MPIF Princeton p. 1
20. R. Polini Chemically vapour deposited diamond coatings on cemented tungsten carbides: substrate pretreatments, adhesion and cutting performance Thin Solid Films 515 2006 4 13 (Pubitemid 44572066)
21. R. Polini, and M. Barletta On the use of CrN/Cr and CrN interlayers in hot filament chemical vapour deposition (HF-CVD) of diamond films onto WC-Co substrates Diamond Relat. Mater. 17 2008 325 335 (Pubitemid 351381367)
22. R. Polini, and M. Barletta Wear resistance of nano- and micro-crystalline diamond coatings onto WC-Co with Cr/CrN interlayers Thin Solid Films 519 2010 1629 1635
23. C.Y. Poon, and B. Bhushan Comparison of surface roughness measurements by stylus profiler, AFM and non-contact optical profiler Wear 190 1995 76 88
24. P. Roy, S.K. Sarangi, A. Ghosh, and A.K. Chattopadhyay Machinability study of pure aluminum and Al-12% Si alloys against uncoated and coated carbide inserts Int. J. Refract. Met. Hard Mater. 27 2009 535 544
25. S.K. Sarangi, A. Chattopadhyay, and A.K. Chattopadhyay Effect of pretreatment, seeding and interlayer on nucleation and growth of HFCVD diamond films on cemented carbide tools Int. J. Refract. Met. Hard Mater. 26 2008 220 231 (Pubitemid 351215664)
26. K. Sutherland Machinery and processing: managing cutting fluids used in metal working Filtration Separation 45 2008 20 23
27. E. Uhlmann, and J. Koenig CVD diamond coatings on geometrically complex cutting tools CIRP Annals Manuf. Technol. 58 2009 65 68
28. A.A. Volinsky, N.R. Moody, and W.W. Gerberich Interfacial toughness measurements for thin films on substrates Acta Mater. 50 2002 441 466 (Pubitemid 34064992)
29. B. Warcholinski, and A. Gilewicz Tribological properties of CrNx coatings JAMME 37 2009 498 504
30. X. Xiao, B.W. Sheldon, E. Konca, L.C. Lev, and M.J. Lukitsch The failure mechanism of chromium as the interlayer to enhance the adhesion of nanocrystalline diamond coatings on cemented carbide Diamond Relat. Mater. 18 2009 1114 1117
31. Z. Xu, L. Lev, M. Lukitsch, and A. Kumar Effects of surface pretreatments on the deposition of adherent diamond coatings on cemented tungsten carbide substrates Diamond Relat. Mater. 16 2007 461 466 (Pubitemid 46209717)
32. Z.M. Zhang, X.C. He, H.S. Shen, F.H. Sun, M. Chen, and Y.Z. Wan Pre-treatment for diamond coatings on free-shape WC-Co tools Diamond Relat. Mater. 9 2000 1749 1752