Surface integrity of biodegradable Magnesium-Calcium orthopedic implant by burnishing

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 4, Issue 8, 2011, Pages 1888-1904

  Salahshoor, M ^a   Guo, Y B ^a  

^a University of Alabama   (United States)

Author keywords

Biomaterial; Burnishing; Implant; Magnesium; Surface integrity

Indexed keywords

BURNISHING PARAMETERS; DEGRADATION RATE; GRAIN SIZE; HARDENED DEPTH; HUMAN BODIES; IMPLANT MATERIALS; IMPLANT SURFACE; LOAD CARRYING; MACHINED SURFACE; MECHANICAL BEHAVIOR; METALLIC IMPLANTS; ORTHOPEDIC IMPLANT; ORTHOPEDIC MATERIALS; STRESS SHIELDING; SURFACE INTEGRITY;

ALLOYS; BIODEGRADABLE POLYMERS; BIODEGRADATION; BIOMATERIALS; BIOPOLYMERS; BURNISHING; DEGRADATION; IMPLANTS (SURGICAL); MAGNESIUM; MICROSTRUCTURE; RESIDUAL STRESSES; SURFACE TOPOGRAPHY;

SURFACES;

CALCIUM DERIVATIVE; MAGNESIUM DERIVATIVE;

ARTICLE; BIODEGRADABLE IMPLANT; BIOMECHANICS; BURNISHING; HARDNESS; MECHANICAL STRESS; MEMBRANE STRUCTURE; ORTHOPEDIC PROSTHESIS; PRESSURE; PRIORITY JOURNAL; SURFACE PROPERTY; VELOCITY;

ABSORBABLE IMPLANTS; CALCIUM; HARDNESS; MAGNESIUM; STRESS, MECHANICAL; SURFACE PROPERTIES;

EID: 81255185191     PISSN: 17516161     EISSN: 18780180     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2011.06.006     Document Type: Article

References (46)

1. Aksakal B., Hanyaloglu C. Bioceramic dip-coating on Ti-6Al-4V and 316L SS implant materials. J. Mater. Sci., Mater. Med. 2008, 19:2097-2104.
2. Au A.G., Raso V.J., Liggins A.B., Amirfazli A. Contribution of loading conditions and material properties to stress shielding near the tibial component of total knee replacements. J. Biomech. 2007, 40:1410-1416.
3. Bozdana A.T., Gindy N.Z. Comparative experimental study on effects of conventional and ultrasonic deep cold rolling processes on Ti-6Al-4V. Mater. Sci. Technol. 2008, 24:1378-1384.
4. Brinksmeier E., Garbrecht M., Meyer D. Cold surface hardening. CIRP Ann.-Manuf. Tech. 2008, 57:541-544.
5. Byrne G., Dornfeld D., Denkena B. Advancing cutting technology. Ann. CIRP 2003, 52:483-507.
6. Denkena, B., Witte, F., Podolsky, C., Lucas, A., 2005. Degradable implants made of magnesium alloys. In: Proc. 5th Euspen Int. Conf., Montpellier, France.
7. Denkena B., Lucas A. Biocompatible magnesium alloys as absorbable implant materials-adjusted surface and subsurface properties by machining processes. Ann. CIRP 2007, 56:113-116.
8. Denkena B., Meyer R., Breidenstein B. Development of combined manufacturing technologies for high-strength structure components. Adv. Mater. Res. 2007, 22:67-75.
9. Disegi, J.A., Sax, C., 2009. Effect of low plasticity burnishing on the fatigue strength of spinal rods. In: Proc. of ASM Materials & Processes for Medical Devices Conf. and Expo., Minneapolis, MN.
10. Completo A., Fonseca F., Simoes J.A. Strain shielding in proximal tibia of stemmed knee prosthesis: experimental study. J. Biomech. 2008, 41:560-566.
11. Gefen A. Computational simulations of stress shielding and bone resorption around existing and computer-designed orthopaedic screws. Med. Bio. Eng. Comp. 2002, 40:311-322.
12. Gill C.M., Fox N., Withers P.J. Shakedown of deep cold rolling residual stresses in titanium alloys. J. Phys. D: Appl. Phys. 2008, 41. 174005 (5pp).
13. Guo, Y.B., Brooks, V., 2009. Characterization of mechanical property and microstructure of biomedical magnesium alloy. In: Proc. of ASM Materials & Processes for Medical Devices Conf. and Expo., Minneapolis, MN.
14. Guo Y.B., Salahshoor M. Process mechanics and surface integrity by high speed dry milling of biodegradable magnesium-calcium implant alloys. CIRP Ann.-Manuf. Tech. 2010, 59:151-154.
15. Hassel T., Bach F.W. Production and properties of small tubes made from MgCa0.8 for application as stent in biomedical science. Magnesium: Proc. 7th Int. Conf. Magnesium Alloys and Their Applications 2007, 432-437. Wiley-VCH Verlag GmbH & Co. K.U. Kainer (Ed.).
16. Hassel T., Bach F.W., Krause C. Influence of alloy composition on the mechanical and electrochemical properties of binary Mg-Ca alloys and its corrosion behavior in solutions at different chloride concentrations. Magnesium: Proc. 7th Int. Conf. Magnesium Alloys and Their Applications 2007, 789-795. Wiley-VCH Verlag GmbH & Co. K.U. Kainer (Ed.).
17. Heublein B., Rohde R., Kaese V., Niemeyer M., Hartung W., Haverich A. Biocorrosion of magnesium alloys: a new principle in cardiovascular implant technology. Heart 2003, 89:651-656.
18. Ilich J.Z., Kerstetter J.E. Nutrition in bone health revisited: a story beyond calcium. J. Am. Coll. Nutr. 2000, 19:715-737.
19. Isaksson H., Lerner A.L. Mathematical modeling of stress shielding with bioresorbable materials for internal fracture fixation. Bioeng. Conf. 2003, 1041-1042.
20. Jayaraman, N., Hornbach, D.J., Prevey, P.S., 2007. Mitigation of fatigue and pre-cracking damage in aircraft structures through low plasticity burnishing. In: Proc. ASIP, Palm Springs, CA.
21. Juijerm P., Altenberger I. Effective boundary of deep-rolling treatment and its correlation with residual stress stability of Al-Mg-Mn and Al-Mg-Si-Cu alloys. Scr. Mater. 2007, 56:745-748.
22. Li Z., Gu X., Lou S., Zheng Y. The development of binary Mg-Ca alloys for use as biodegradable materials within bone. Biomaterials 2008, 29:1329-1344.
23. Liu C., Xin Y., Tang G., Chu P.K. Influence of heat treatment on degradation behavior of bio-degradable die-cast AZ63 magnesium alloy in simulated body fluid. Mat. Sci. Eng. A 2007, 456:350-357.
24. Lopez L.N., Lamikiz A., Sanchez J.A., Arana J.L. The effect of ball burnishing on heat treated steel and Inconel 718 milled surfaces. Int. J. Adv. Manuf. Technol. 2007, 32:958-968.
25. Massalski T.B. Binary Alloy Phase Diagrams 1990, 1,927-928. ASM Int. 2nd ed.
26. Nagels J., Stokdijk M., Rozing P.M. Stress shielding and bone resorption in shoulder arthroplasty. J. Shoulder Elbow Surg. 2003, 12:35-39.
27. Nikitin I., Altenberger I. Comparison of the fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic stainless steel AISI 304 in the temperature range 25-600 °C. Mater. Sci. Eng. A 2007, 465:176-182.
28. Nikitin I., Besel M. Correlation between residual stress and plastic strain amplitude during low cycle fatigue of mechanically surface treated austenitic stainless steel AISI 304 and ferritic-pearlitic steel SAE 1045. Mater. Sci. Eng. A 2008, 491:297-303.
29. Nikitin I., Besel M. Residual stress relaxation of deep-rolled austenitic steel. Scr. Mater. 2008, 58:239-242.
30. Prevey P.S., Cammett J.T. The influence of surface enhancement by low plasticity burnishing on the corrosion fatigue performance of AA7075-T6. Int. J. Fatigue 2004, 26:975-982.
31. Prevey P.S., Ravindranath R.A., Shepard M., Gabb T. Case studies of fatigue life improvement using low plasticity burnishing in gas turbine engine applications. J. Eng. Gas Turbines and Power 2006, 128:865-872.
32. Prevey P.S., Hornbach D.J., Jayaraman N. Controlled plasticity burnishing to improve the performance of friction stir processed Ni-Al bronze. Mater. Sci. Forum 2007, 539:3807-3813.
33. Prevey, P., McNulty, D., Carr, J., Sade, P., Craft, A., 2009. Fatigue strength enhancement of Ti-6Al-4V ELI femoral distal stems using low plasticity burnishing. In: Proc. of ASM Materials & Processes for Medical Devices Conf. and Expo., Minneapolis, MN.
34. Rao D.S., Hebbar H.S., Komaraiah M., Kempaiah U.N. Investigations on the effect of ball burnishing parameters on surface hardness and wear resistance of HSLA dual-phase steels. Mater. Manuf. Process. 2008, 23:295-302.
35. Scheel, J.E., Hornbach, D.J., Prevey, P.S., 2009. Safe life conversion of aircraft aluminum structures via low plasticity burnishing for mitigation of corrosion related failures. Department of Defense Corrosion Conf., Gaylord National, Washington, DC.
36. Schuh A., Zeller C., Holzwarth U., Kachler W., Wilcke G., Zeiler G., Eigenmann B., Bigoney J. Deep rolling of titanium rods for application in modular total hip arthroplasty. J. Biomed. Mater. Res. Part B: Appl. Biomater. 2006, 10.1002/jbmb.
37. Seemikeri C.Y., Brahmankar P.K., Mahagaonkar S.B. Low plasticity burnishing: an innovative manufacturing method for biomedical applications. J. Manuf. Sci. Eng. 2008, 130. 021008/1-8.
38. Seemikeri C.Y., Brahmankar P.K., Mahagaonkar S.B. Investigations on surface integrity of AISI 1045 using LPB tool. Tribol. Int. 2008, 41:724-734.
39. Seiler H.G. Handbook on Toxicity of Inorganic Compounds 1987, CRC Press. 1st ed.
40. Song G. Control of biodegradation of biocompatible magnesium alloys. Corros. Sci. 2007, 49:1696-1701.
41. Song G., Song S. A possible biodegradable magnesium implant material. Adv. Eng. Mater. 2007, 9:298-302.
42. Tsuji N., Tanaka S., Takasugi T. Evaluation of surface-modified Ti-6Al-4V alloy by combination of plasma-carburizing and deep-rolling. Mater. Sci. Eng. A 2008, 488:139-145.
43. Tsuji N., Tanaka S., Takasugi T. Effect of combined plasma-carburizing and deep rolling on notch fatigue property of Ti-6Al-4V alloy. Mater. Sci. Eng. A 2009, 499:482-488.
44. von Der Hoh N., Bormann D., Lucas A., Denkena B., Hackenbroich C., Meyer-Lindenberg A. Influence of different surface machining treatments of magnesium-based resorbable implants on the degradation behavior in rabbits. Adv. Eng. Mater. 2009, 11. B47-54.
45. Wang H., Estrin Y., Fu H., Song G., Zuberova Z. The effect of pre-processing and grain structure on the bio corrosion and fatigue resistance of magnesium alloy AZ31. Adv. Eng. Mater. 2007, 9:967-972.
46. Witte F., Kaese V., Haferkamp H., Switzer E., Meyer-Lindenberg A., Wirth C.J., Windhagen H. In vivo corrosion of four magnesium alloys and the associated bone response. Biomaterials 2005, 26:3557-3563.