A functional classification framework for the conceptual design of layered manufacturing technologies

Proceedings of the ASME Design Engineering Technical Conference

Volumn 5, Issue , 2008, Pages 35-48

  Williams, Christopher B ^a   Mistree, Farrokh ^b   Rosen, David W ^b  

^a Virginia Polytechnic Institute and State University   (United States)

^b GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CLASSIFICATION FRAMEWORK; FUNCTIONAL CLASSIFICATION; LAYERED MANUFACTURING TECHNOLOGIES; METAL ARTIFACTS; THREE-DIMENSIONAL PRINTING;

CONCEPTUAL DESIGN; MACHINE DESIGN; TECHNOLOGY;

LAYERED MANUFACTURING;

EID: 81155123698     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/DETC2008-49353     Document Type: Conference Paper

References (67)

1. 3D Systems, 2007, 3D Modeling & Desktop Prototyping with V-Flash by 3D Systems. http://www.modelin3d.com/.
2. Agarwala, M., D. Bourell, J. Beaman, H. Marcus and J. Barlow, 1995, "Direct Selective Laser Sintering of Metals," Rapid Prototyping Journal, Vol. 1, No. 1, pp. 26-36.
3. Agarwala, M. K., V. R. Jamalabad, N. A. Langrana, A. Safari, P. J. Whalen and S. C. Danforth, 1996, "Structural Quality of Parts Processed by Fused Deposition," Rapid Prototyping Journal, Vol. 2, No. 4, pp. 4-19. (Pubitemid 126637034)
4. Aljdelsztajn, L., B. Jodoin, G. E. Kim and J. M. Schoenung, 2005, "Cold Spray Deposition of Nanocrystalline Aluminum Alloys," Metallurgial and Materials Transactions, Vol. 36A, No. 3, pp. 657-666. (Pubitemid 40466671)
5. Beaman, J. J., J. W. Barlow, D. L. Bourell, R. H. Crawford, H. L. Marcus and K. P. McAlea, 1997, Solid Freeform Fabrication: A New Direction in Manufacturing Kluwer Academic Publishers, Boston, Mass.
6. Bender, B. A., R. J. Rayne and T. L. Jessen, 2001, "Laminated Object Manufacturing of Functional Ceramics," Ceramic Engineering and Science Proceedings, pp. 127-134.
7. Blazdell, P. F., J. R. G. Evans, M. J. Edirisinghe, P. Shaw and M. J. Binstead, 1995, "The Computer Aided Manufacture of Ceramics Using Multilayer Jet Printing," Journal of Materials Science Letters, 14, pp. 1562-1565.
8. Clarinval, A., R. Carrus and T. Dormal, 2003, "Development of Material for Optoform Process," 1st International Conference on Advanced Research in Virtual and Rapid Prototyping (VRAP), Leiria, Portugal, pp. 279-282.
9. Cochran, J. K., K. J. Lee, D. L. McDowell and T. H. Sanders, 2002, "Multifunctional Metallic Honeycombs by Thermal Chemical Processing," Processing and Properties of Lightweight Cellular Metals and Structures (TMS), pp. 127-136.
10. Cormier, D., O. Harrysson and H. West, 2004, "Characterization of H13 Steel Produced via Electron Beam Melting," Rapid Prototyping Journal, Vol. 10, No. 1, pp. 35-41.
11. Das, A., G. Madras, N. Dasgupta and A. M. Umarji, 2003, "Binder Removal Studies in Ceramic Thick Shapes Made by Laminated Object Manufacturing," Journal of the European Ceramic Society, Vol. 23, pp. 1013-1017. (Pubitemid 36270386)
12. Derby, B. and N. Reis, 2003, "Inket Printing of Highly Loaded Particulate Suspensions," Materials Research Society Bulletin, Vol. 28, No. 11, pp. 815-818.
13. Desktop Factory, Inc., 2007, "Desktop Factory: 3D Printers", http://www.desktopfactory.com/.
14. Evans, J. R. G., 2001, "Direct Ink Jet Printing of Ceramics: Experiment in Teleology," British Ceramic Transactions, Vol. 100, No. 3, pp. 124-128. (Pubitemid 34108688)
15. Evans, R. S., D. L. Bourell, J. Beaman and M. I. Campbell, 2005, "Rapid Manufacturing of Silicon Carbide Composites," Rapid Prototyping Journal, Vol. 11, No. 1, pp. 37-40. (Pubitemid 40242608)
16. Fu, Q., O. Jongprateep, A. Abbott and F. Dogan, 2006, "Freeze-Spray Processing of Layered Ceramic Composites," Solid Freeform Fabrication Symposium, Austin, TX., pp. 339-348.
17. Geving, B., A. Kataria, C. Moore, I. Ebert-Uphoff, T. R. Kurfess and D. W. Rosen, 2000, "Conceptual Design of a Generalized Stereolithography Machine," Japan-USA Symposium on Flexbile Automation, Ann Arbor, MI.
18. Grau, J., J. Moon, S. Uhland, M. J. Cima and E. Sachs, 1997, "High Green Density Ceramic Components Fabricated by the Slurry-Based 3DP Process," Solid Freeform Fabrication Symposium, Austin, TX., pp. 371-378.
19. Greul, M., F. Petzoldt, M. Greulich and J. Wunder, 1997, "Rapid Prototyping Moves on Metal Powders," Metal Powder Report, Vol. 52, No. 10, pp. 24-27.
20. Greul, M., T. Pintat and M. Greulich, 1996, "Rapid Prototyping of Functional Metallic and Ceramic Parts Using the Multiphase Jet Solidification (MJS) Process," Advances in Powder Metallurgy and Particulate Materials, Washington, D.C., pp. 7.281-7.287.
21. Greulich, M., 1997, "Rapid Prototyping and Fabrication of Tools and Metal Parts by Laser Sintering of Metal Powders," Materials Technology, Vol. 12, No. 5, pp. 155-157.
22. Grida, I. and J. R. G. Evans, 2003, "Extrusion Freeforming of Ceramics through Fine Nozzles," Journal of European Ceramic Society, Vol. 23, pp. 629-635. (Pubitemid 36141413)
23. Griffith, M. L. and J. W. Halloran, 1994, "Ultraviolet Curable Ceramic Suspensions for Stereolithography of Ceramics," Manufacturing Science and Engineering, ASME, Production Engineering Division, Vol. 68, No. 2, pp. 529-534.
24. Hedges, M. and D. M. Keicher, 2002, "Laser Engineered Net Shaping - Technology and Applications," 3rd National Conference on Rapid Prototyping, Rapid Tooling, and Rapid Manufacturing, Buckinghamshire, UK, pp. 17-23.
25. Himmer, T., T. Nakagawa and H. Noguchi, 1997, "Stereolithography of Ceramics," Solid Freeform Fabrication Symposium, Austin, TX., pp. 363-369.
26. Hinczewski, C., S. Corbel and T. Chartier, 1998, "Stereolithography for the Fabrication of Ceramic Three-Dimensional Parts," Rapid Prototyping Journal, Vol. 4, No. 3, pp. 104-111. (Pubitemid 128725112)
27. Hopkinson, N. and P. Erasenthiran, 2004, "High Speed Sintering - Early Research into a New Rapid Manufacturing Process," Solid Freeform Fabrication Symposium, Austin, TX., pp. 312-320.
28. Huang, T., M. S. Mason, G. E. Hilmas and M. C. Leu, 2006, "Freeze-form Extrusion Fabrication of Ceramic Parts," International Journal of Virtual and Physical Prototyping, Vol. 1, No. 2, pp. 93-100.
29. Jardini, A. L., R. Maciel, M. A. Scarparo, S. R. Andrade and L. F. Moura, 2003, "The Development in Infrared Stereolithography Using Thermosensitive Polmers," International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal, pp. 273-277.
30. Johnson, R. W., J.-H. Park, W. J. Lackey and D. W. Rosen, 2003, "Advances in Laser Chemical Vapor Depostion of Metals and Ceramics," International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal.
31. Karlsen, R. and J. Reitan, 2003, "Metal Printing - Development of a New Rapid Manufacturing Process for Metal and Ceramic Objects," International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal, pp. 569-589.
32. Khoshnevis, B., S. Bukkapatnam, H. Kwon and J. Saito, 2001, "Experimental Investigation of Contour Crafting Using Ceramic Materials," Rapid Prototyping Journal, Vol. 7, No. 1, pp. 32-41. (Pubitemid 32690550)
33. Kruth, J. P., P. Mercelis, L. Froyen and M. Rombouts, 2004, "Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting," Solid Freeform Fabrication Symposium, Austin, TX., pp. 44-59.
34. Kruth, J. P., P. Mercelis, J. VanVaerenbergh, L. Froyen and M. MRombouts, 2003, "Advances in Selective Laser Sintering," International Conference on Advanced Research in Virtual and Rapid Prototyping, pp. 59-69.
35. Levy, G. N., R. Schindel and J. P. Kruth, 2003, "Rapid Manufacturing and Rapid Tooling with Layer Manufacturing (LM) Technologies, State of the Art and Future Perspectives," Annals of the CIRP, Vol. 52, No. 2, pp. 589-609.
36. Lewis, J. A., 2000, "Colloidal Processing of Ceramics," Journal of the American Ceramic Society, Vol. 83, No. 10, pp. 2341-2359.
37. Li, X., H. Choi and Y. Yang, 2002, "Micro Rapid Prototyping System for Micro Components," Thin Solid Films, Vol. 420-421, pp. 515-523. (Pubitemid 35459771)
38. Limaye, A. and D. W. Rosen, 2006, "Process Planning for Mask Projection Stereolithography," Rapid Prototyping Journal, Vol. 12, No. 5.
39. Liu, Z. E., T. C. Ko, J. Best, J. D. Cawley and A. H. Heuer, 1997, "CAM-LEM Processing: Materials Flexibility," Solid Freeform Fabrication Symposium, Austin, TX, pp. 379-382.
40. Lu, X., S. Yang, L. Chen and J. R. G. Evans,2006. "Dry Powder Microfeeding System for Solid Freeform Fabrication," Austin, TX.: pp. 636-643.
41. Michaels, S., E. M. Sachs and M. J. Cima, 1992, "Metal Parts Generation by Three Dimensional Printing," Solid Freeform Fabrication Symposium, Austin, TX., pp. 244 - 250.
42. Morissette, S. L., J. A. Lewis, J. Cesarno, D. B. Dimos and T. Baer, 2000, "Solid Freeform Fabrication of Aqueous Alumina-Poly(vinyl alcohol) Gelcasting Suspensions," Journal of the American Ceramic Society, Vol. 83, No. 10, pp. 2409-2416.
43. Mott, M., J. H. Song and J. R. G. Evans, 1999, "Microengineering of Ceramics by Direct Ink-Jet Printing," Journal of the American Ceramic Society, Vol. 82, No. 7, pp. 1653-1658.
44. Orme, M., Q. Liu and R. Smith, 2000, "Molten Aluminum Micro-Droplet Formation and Deposition for Advanced Manufacturing Applications," Aluminum Transactions Journal, Vol. 3, No. 1, pp. 95-103.
45. Pahl, G. and W. Beitz, 1996, Engineering Design: A Systematic Approach, Springer-Verlag, London.
46. Percin, G. and B. T. Khuri-Yakub, 2003, "Piezoelectric Droplet for Ink-Jet Printing of Fluids and Solid Particles," Review of Scientific Instruments, Vo. 74, No. 2, pp. 1120-1127.
47. Phenix Systems, 2005, "Phenix Systems Products", http://www.phenix-systems.com/home-en.php.
48. Rice, C. S., P. F. Mendez and S. B. Brown, 2000, "Metal Solid Freeform Fabrication Using Semi-Solid Slurries," The Member Journal of the Minerals, Metals & Materials Society, Vol. 52, No. 12.
49. Sachs, E. M., 2000, "Powder Dispensing Apparatus Using Vibration," 6,036,777, Massachusetts Institute of Technology, United States.
50. Seepersad, C. C., R. S. Kumar, J. K. Allen, F. M. Mistree and D. L. McDowell, 2004, "Multifunctional Design of Prismatic Cellular Materials," Journal of Computer-Aided Materials Design, Vol. 11, No 2, pp. 163-181. (Pubitemid 40890934)
51. Sirringhaus, H. and T. Shimoda, 2003, "Inkjet Printing of Functional Materials," Materials Research Society Bulletin: Inket Printing of Functional Materials, Vol. 28, No. 11, pp. 802-806.
52. Slade, C. E. and J. R. G. Evans, 1998, "Freeforming Ceramics Using a Thermal Jet Printer," Journal of Materials Science Letters, Vol. 17, pp. 1669-1671. (Pubitemid 128510130)
53. Solidica, Inc., 2004, "Solidica: Direct to Metal Aluminum Tooling for Advanced Manufacturing", www.solidica.com/technology.html.
54. Stratasys, February 2007, 2007, The Added Convenience of WaterWorks. http://www.stratasys.com/systems-misc.aspx?id=132.
55. Thomas, H. R., N. Hopkinson and P. Erasenthiran, 2007, "High Speed Sintering - Continuing Research into a New Rapid Manufacturing Process," Solid Freeform Fabrication Symposium, Austin, TX., pp. 682-691.
56. Utela, B., R. L. Anderson and H. Kuhn, 2006, "Advanced Ceramic Materials and Three-Dimensional Printing (3DP)," 17th Solid Freeform Fabrication Symposium, Austin, TX, pp. 290-303, pp. 290-303.
57. Vaidyanathan, R., J. L. Lombardi, J. Walish, S. Kasichainula, P. Calvert and K. Cooper, 1999, "Extrusion Freeform Fabrication of Functional Ceramic Prototypes," Solid Freeform Fabrication Symposium, Austin, TX, pp. 327-334.
58. Wang, H. and D. W. Rosen, 2002, "Computer-Aided Design Methods for Additive Fabrication of Truss Structures," International Conference on Manufacturing Automation, Hong Kong.
59. Wang, H. V., S. R. Johnston and D. W. Rosen, 2006, "Design of a Graded Cellular Structure for an Acetabular Hip Replacement Component," 17th Solid Freeform Fabrication Symposium, Austin, TX, pp. 111-123.
60. Watson, J. K., K. M. B. Taminger, R. A. Hafley and D. D. Peterson, 2002, "Development of a Prototype Electron Beam Freeform Fabrication System," 13th Solid Freeform Fabrication Symposium, Austin, TX, pp. 458-465.
61. White, D. and D. E. E. Carmein, 2002, "Ultrasonic Object Consolidation System and Method," 6,463,349, Solidica, Inc., United States.
62. Williams, C. B., F. Mistree and D. W. Rosen, 2005a, "Investigation of Solid Freeform Fabrication Processes for the Manufacture of Parts with Designed Mesostructure," ASME IDETC Design for Manufacturing and the Life Cycle Conference, Long Beach, California, DETC2005/DFMLC-84832.
63. Williams, C. B., F. Mistree and D. W. Rosen, 2005b, "Towards the Design of a Layer-Based Additive Manufacturing Process for the Realization of Metal Parts of Designed Mesostructure," 16th Solid Freeform Fabrication Symposium, Austin, TX, pp. 217-230.
64. Williams, C. B., F. Mistree and D. W. Rosen, 2008, "The Systematic Design of a Layered Manufactruing Process for the Realization of Metallic Parts of Designed Mesostructure," ASME International Design and Technical Conferences & Computers and Information in Engineering Conference, Brooklyn, New York, DETC2008/DEC-49457.
65. Williams, C. B. and D. W. Rosen, 2007, "Manufacturing Cellular Materials via Three-Dimensional Printing of Spray-Dried Metal Oxide Ceramic Powder," 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal.
66. Yang, S. and J. R. G. Evans, 2004, "Acoustic Control of Powder Dispensing in Open Tubes," Powder Technology, Vol. 139, pp. 55-60. (Pubitemid 38050139)
67. Zwicky, F., 1967, "The Morphological Approach to Discovery, Invention, Research and Construction," New Methods of Thought and Procedure, (F. Zwicky and A. G. Wilson, eds.), Springer-Verlag, New York, pp. pp. 273-297.