A load adaptive control approach for a zero-voltage-switching DC/DC converter used for electric vehicles

IEEE Transactions on Industrial Electronics

Volumn 59, Issue 2, 2012, Pages 920-933

  Pahlevaninezhad, Majid ^a   Drobnik, Josef ^b   Jain, Praveen K ^a   Bakhshai, Alireza ^a  

^a Queen's University   (Canada)

^b FREESCALE SEMICONDUCTOR INC   (United States)

Author keywords

DC DC converter; full bridge converter; lagging leg; leading leg; shoot through; snubber capacitor; zero voltage switching (ZVS)

Indexed keywords

FULL BRIDGE CONVERTERS; LAGGING LEG; LEADING LEG; SHOOT-THROUGH; SNUBBER CAPACITORS;

ADAPTIVE CONTROL SYSTEMS; CAPACITORS; CHARGING (BATTERIES); ELECTRIC DISCHARGES; ELECTRIC SWITCHES; ELECTRIC SWITCHGEAR; ELECTRIC VEHICLES; ZERO VOLTAGE SWITCHING;

DC-DC CONVERTERS;

EID: 80054811319     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2011.2161063     Document Type: Article

References (42)

1. G.-B. Koo, G.-W. Moon, and M.-J. Youn, "Analysis and design of phase shift full bridge converter with series-connected two transformers," IEEE Trans. Power Electron., vol. 19, no. 2, pp. 411-419, Mar. 2004.
2. J. Wang, F. Z. Peng, J. Anderson, A. Joseph, and R. Buffenbarger, "Low cost fuel cell converter system for residential power generation," IEEE Trans. Power Electron., vol. 19, no. 5, pp. 1315-1322, Sep. 2004.
3. M. J. Schutten and D. A. Torrey, "Improved small-signal analysis for the phase-shifted PWM power converter," IEEE Trans. Power Electron., vol. 18, no. 2, pp. 659-669, Mar. 2003.
4. A. Averberg and A. Mertens, "Analysis of a voltage-fed full bridge DC-DC converter in fuel cell systems," in Proc. IEEE PESC, Jun. 17-21, 2007, pp. 286-292.
5. W.-J. Lee, C.-E. Kim, G.-W. Moon, and S.-K. Han, "A new phaseshifted full-bridge converter with voltage-doubler-type rectifier for highefficiency PDP sustaining power module," IEEE Trans. Ind. Electron., vol. 55, no. 6, pp. 2450-2458, Jun. 2008.
6. Y. Jang and M. M. Jovanovic, "A new family of full-bridge ZVS converters," IEEE Trans. Power Electron., vol. 19, no. 3, pp. 701-708, May 2004.
7. X. Wu, J. Zhang, X. Xie, and Z. Qian, "Analysis and optimal design considerations for an improved full bridge ZVS DC-DC converter with high efficiency," IEEE Trans. Power Electron., vol. 21, no. 5, pp. 1225-1234, Sep. 2006.
8. R. Ayyanar and N. Mohan, "Novel soft-switching DC-DC converter with full ZVS-range and reduced filter requirement. I. Regulated-output applications," IEEE Trans. Power Electron., vol. 16, no. 2, pp. 184-192, Mar. 2001.
9. G. Hua, F. C. Lee, and M. M. Jovanovic, "An improved zero-voltageswitched PWM converter using a saturable inductor," in Conf. Rec. IEEE 22nd Annu. PESC, Jun. 24-27, 1991, pp. 189-194.
10. Y.-C. Chuang and Y.-L. Ke, "A novel high-efficiency battery charger with a buck zero-voltage-switching resonant converter," IEEE Trans. Energy Convers., vol. 22, no. 4, pp. 848-854, Dec. 2007.
11. Y.-C. Chuang and Y.-L. Ke, "High-efficiency and low-stress ZVT-PWM DC-to-DC converter for battery charger," IEEE Trans. Ind. Electron., vol. 55, no. 8, pp. 3030-3037, Aug. 2008.
12. Y.-C. Chuang, Y.-L. Ke, and S.-Y. Chang, "Highly-efficient battery chargers with parallel-loaded resonant converters," in Conf. Rec. IEEE IAS Annu. Meeting, Oct. 4-8, 2009, pp. 1-10.
13. M. G. Egan, D. L. O'Sullivan, J. G. Hayes, M. J.Willers, and C. P. Henze, "Power-factor-corrected single-stage inductive charger for electric vehicle batteries," IEEE Trans. Ind. Electron., vol. 54, no. 2, pp. 1217-1226, Apr. 2007.
14. O. D. Patterson and D. M. Divan, "Pseudo-resonant full bridge DC/DC converter," IEEE Trans. Power Electron., vol. 6, no. 4, pp. 671-678, Oct. 1991.
15. M. Nakaoka, S. Nagai, Y. J. Kim, Y. Ogino, and Y. Murakami, "The stateof-the-art phase-shifted ZVS-PWM series and parallel resonant DC-DC power converters using internal parasitic circuit components and new digital control," in Conf. Rec. IEEE 23rd Annu. PESC, Jun. 29-Jul. 3, 1992, vol. 1, pp. 62-70.
16. P. K. Jain, W. Kang, H. Soin, and Y. Xi, "Analysis and design considerations of a load and line independent zero voltage switching full bridge DC/DC converter topology," IEEE Trans. Power Electron., vol. 17, no. 5, pp. 649-657, Sep. 2002.
17. A. Emadi, K. Rajashekara, S. S. Williamson, and S. M. Lukic, "Topological overview of hybrid electric and fuel cell vehicular power system architectures and configurations," IEEE Trans. Veh. Technol., vol. 54, no. 3, pp. 763-770, May 2005.
18. A. Emadi, Y. J. Lee, and K. Rajashekara, "Power electronics and motor drives in electric, hybrid electric, and plug-in hybrid electric vehicles," IEEE Trans. Ind. Electron., vol. 55, no. 6, pp. 2237-2245, Jun. 2008.
19. H. Al-Atrash and I. Batarseh, "Digital controller design for a practicing power electronics engineer," in Proc. 22nd Annu. IEEE APEC, Feb. 25-Mar. 1, 2007, pp. 34-41.
20. Y.-F. Liu and X. Liu, "Recent developments in digital control strategies for DC/DC switching power converters," in Proc. IEEE 6th IPEMC Conf., May 17-20, 2009, pp. 307-314.
21. R. W. Erickson and D. Maksimovic, Fundamentals of Power Electronics, 2nd ed. Norwell, MA: Kluwer, 2001.
22. Ferroxcube, Ferroxcube 2009 Data Handbook Data Handbook Soft Ferrites and Accessories, Nov. 2008.
23. M. B. Camara, H. Gualous, F. Gustin, A. Berthon, and B. Dakyo, "DC/DC converter design for supercapacitor and battery power management in hybrid vehicle applications-Polynomial control strategy," IEEE Trans. Ind. Electron., vol. 57, no. 2, pp. 587-597, Feb. 2010.
24. F. Krismer and J. W. Kolar, "Accurate power loss model derivation of a high-current dual active bridge converter for an automotive application," IEEE Trans. Ind. Electron., vol. 57, no. 3, pp. 881-891, Mar. 2010.
25. Z. Amjadi and S. S. Williamson, "Power-electronics-based solutions for plug-in hybrid electric vehicle energy storage and management systems," IEEE Trans. Ind. Electron., vol. 57, no. 2, pp. 608-616, Feb. 2010.
26. M. Van Wieringen and R. Pop-Iliev, "Development of a dual-fuel power generation system for an extended range plug-in hybrid electric vehicle," IEEE Trans. Ind. Electron., vol. 57, no. 2, pp. 641-648, Feb. 2010.
27. B.-R. Lin, C.-L. Huang, and Y.-E. Lee, "Asymmetrical pulse-width modulation bidirectional DC-DC converter," IET Power Electron., vol. 1, no. 3, pp. 336-347, Sep. 2008.
28. Texas Instrument, TMS320x2833 Analog-to-Digital Converter (ADC) Module, SPRU812A, Sep. 2007.
29. Texas Instrument, TMS320x2833, 2823 ×, SPRUG04A, Oct. 2008. Revised July 2009.
30. Texas Instrument, TMS320x2833, 2823 ×, SPRUG02, Feb. 2009.
31. F. L. Mapelli, D. Tarsitano, andM.Mauri, "Plug-in hybrid electric vehicle: Modeling, prototype realization, and inverter losses reduction analysis," IEEE Trans. Ind. Electron., vol. 57, no. 2, pp. 598-607, Feb. 2010.
32. A. Hajimiragha, C. A. Caizares, M.W. Fowler, and A. Elkamel, "Optimal transition to plug-in hybrid electric vehicles in Ontario, Canada, considering the electricity-grid limitations," IEEE Trans. Ind. Electron., vol. 57, no. 2, pp. 690-701, Feb. 2010.
33. K. Gummi and M. Ferdowsi, "Double-input DC-DC power electronic converters for electric-drive vehicles-Topology exploration and synthesis using a single-pole triple-throw switch," IEEE Trans. Ind. Electron., vol. 57, no. 2, pp. 617-623, Feb. 2010.
34. M. Takagi, K. Shimizu, and T. Zaitsu, "Ultra high efficiency of 95 percent for DC/DC converter-Considering theoretical limitation of efficiency," in Proc. 17th Annu. IEEE APEC, 2002, vol. 2, pp. 735-741.
35. Y. Panov and M. M. Jovanovic, "Design and performance evaluation of low-voltage/high-current DC/DC on-board modules," IEEE Trans. Power Electron., vol. 16, no. 1, pp. 26-33, Jan. 2001.
36. H. Zhang, L. M. Tolbert, and B. Ozpineci, "Impact of SiC devices on hybrid electric and plug-in hybrid electric vehicles," IEEE Trans. Ind. Appl., vol. 47, no. 2, pp. 912-921, Mar.-Apr. 2011.
37. S. G. Wirasingha and A. Emadi, "Classification and review of control strategies for plug-in hybrid electric vehicles," IEEE Trans. Veh. Technol., vol. 60, no. 1, pp. 111-122, Jan. 2011.
38. M. L. G. Kissin, G. A. Covic, and J. T. Boys, "Steady-state flat-pickup loading effects in polyphase inductive power transfer systems," IEEE Trans. Ind. Electron., vol. 58, no. 6, pp. 2274-2282, Jun. 2011.
39. J. Bauman and M. Kazerani, "A novel capacitor-switched regenerative snubber for DC/DC boost converters," IEEE Trans. Ind. Electron., vol. 58, no. 2, pp. 514-523, Feb. 2011.
40. A. Y. Saber and G. K. Venayagamoorthy, "Plug-in vehicles and renewable energy sources for cost and emission reductions," IEEE Trans. Ind. Electron., vol. 58, no. 4, pp. 1229-1238, Apr. 2011.
41. H.-C. Chang and C.-M. Liaw, "An integrated driving/charging switched reluctance motor drive using three-phase power module," IEEE Trans. Ind. Electron., vol. 58, no. 5, pp. 1763-1775, May 2011.
42. I. Aharon and A. Kuperman, "Topological overview of powertrains for battery-powered vehicles with range extenders," IEEE Trans. Power Electron., vol. 26, no. 3, pp. 868-876, Mar. 2011.