Characterization of interfacial stress transfer ability of particulate cellulose composite materials

Mechanics of Materials

Volumn 43, Issue 11, 2011, Pages 693-704

  Gamstedt, E Kristofer ^a   Sandell, Robert ^b   Berthold, Fredrik ^b   Pettersson, Torbjörn ^c   Nordgren, Niklas ^c  

^a UPPSALA UNIVERSITY   (Sweden)

^b INNVENTIA AB   (Sweden)

^c ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

Author keywords

Adhesion; Cellulose spheres; Composite materials; Interfaces; Micromechanics; Stress transfer

Indexed keywords

ADHESIVE FORCE MEASUREMENT; ATOMIC FORCE MICROSCOPES; CELLULOSE FIBRES; COMPOSITE SPHERES; EFFICIENCY PARAMETERS; FITTING PARAMETERS; HIGHER-DEGREE; IMPERFECT INTERFACE; INTERFACE PARAMETERS; INTERFACIAL CHARACTERIZATION; INTERFACIAL INTERACTION; INTERFACIAL STRESS TRANSFER; INVERSE MODELLING; MATRIX; MICROMECHANICAL MODEL; MODEL MATERIALS; PARTICULATE COMPOSITES; SELF-CONSISTENT SCHEME; SPRING CONSTANTS; STIFFNESS MEASUREMENTS; STRESS TRANSFER;

ATOMIC FORCE MICROSCOPY; CHARACTERIZATION; COMPOSITE MATERIALS; ELASTIC MODULI; FIBERS; FRACTURE; FRACTURE TOUGHNESS; MICROMECHANICS; POLYMER MATRIX; REINFORCEMENT; SPHERES; STIFFNESS MATRIX; STRESSES; TRANSFER MATRIX METHOD;

CELLULOSE;

EID: 80054026932     PISSN: 01676636     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.mechmat.2011.06.015     Document Type: Article

References (46)

1. C. AulS. Ahola, P. Josefsson, T. Nishino, Y. Hirose, M. Österberg, and L. Wgberg Nanoscale cellulose films with different crystallinities and mesostructures - their surface properties and interaction with water Langmuir 25 2009 7675 7685
2. J. Agde Tjernlund, E.K. Gamstedt, and P. Gudmundson Length-scale effects on damage development in tensile loading of glass-sphere filled epoxy Int. J. Solids Struct. 43 2006 7337 7357 (Pubitemid 44488680)
3. K.M. Almgren, and E.K. Gamstedt Characterization of interfacial stress transfer ability by dynamic mechanical analysis of cellulose fiber based composite materials Compos. Interfaces 17 2010 845 861
4. J.R. Barnett, and V.A. Bonham Cellulose microfibril angle in the cell wall of wood fibres Biol. Rev. 79 2004 461 472 (Pubitemid 38691099)
5. G.P. Carman, R.C. Averill, K.L. Reifsnider, and J.N. Reddy Optimization of fiber coatings to minimize stress concentrations in composite materials J. Compos. Mater. 27 1993 589 612
6. B.V. Derjaguin Friction and adhesion IV. The theory of adhesion of small particles Kolloid-Zeitschrift 69 1934 155 164
7. W.A. Ducker, T.J. Senden, and R.M. Pashley Direct measurement of colloidal forces using an atomic force microscope Nature 353 1991 239 241 (Pubitemid 21896759)
8. S.J. Eichhorn, and R.J. Young The Young's modulus of microcrystalline cellulose Cellulose 8 2001 197 207
9. S.J. Eichhorn, and R.J. Young Deformation micromechanics of natural cellulose fibre networks and composites Compos. Sci. Technol. 63 2003 1225 1230 (Pubitemid 36689448)
10. A.A. Feiler, J. Stiernstedt, K. Theander, P. Jenkins, and M.W. Rutland Effect of capillary condensation on friction force and adhesion Langmuir 23 2007 517 522 (Pubitemid 46226561)
11. F. Huang, K. Li, and A. Kulachenko Measurement of interfiber friction force for pulp fibers by atomic force microscopy J. Mater. Sci. 44 2009 3770 3776
12. D. Garlotta A literature review of poly(lactic acid) J. Polym. Environ. 9 2001 63 84
13. J. George, M.S. Sreekala, and S. Thomas A review on interface modification and characterization of natural fiber reinforced plastic composites Polym. Eng. Sci. 41 2001 1471 1485 (Pubitemid 33006128)
14. J.C. Halpand J.L. Kardon The Halpin-Tsai equation: a review Polym. Eng. Sci. 16 1974 344 352
15. Z. Hashin Thermoelastic properties of particulate composites with imperfect interface J. Mech. Phys. Solids 39 1990 745 762
16. V. Hristov, and S. Vasileva Dynamic mechanical and thermal properties of modified poly(propylene) wood fiber composites Macromol. Mater. Eng. 288 2003 798 806
17. D.S. Hughes, E.B. Blankenship, and R.L. Mims Variation of elastic moduli and wave velocity with pressure and temperature in plastics J. Appl. Phys. 21 1949 294 297
18. R. Joffe, J. Andersons, and L. Wallström Strength and adhesion characteristics of elementary flax fibres with different surface treatments Composites: Part A 34 2003 603 612
19. K.L. Johnson Contact Mechanics 1985 Cambridge University Press Cambridge
20. P. Kakavas, and N. Anifantis Numerical simulation of interfacial debonding in particulate composites considering material inhomogeneities Macromol. Symp. 180 2002 89 108
21. R.M. Kellogg, and F.F. Wangaard Variation in the cell-wall density of wood Wood Fiber Sci. 1 1969 180 204
22. J.-K. Kim, and Y.-W. Mai High strength, high fracture toughness fibre composites with interface control - a review Compos. Sci. Technol. 41 1991 333 378
23. L.-T. Lim, R. Auras, and M. Rubino Processing technologies for poly(lactic acid) Progr. Polym. Sci. 33 2008 820 852
24. H. Lönnberg, L. Fogelström, Q. Zhou, A. Hult, L. Berglund, and E. Malmström Investigation of the graft length impact on the interfacial toughness in a cellulose/poly(-caprolactone) bilayer laminate Compos. Sci. Technol. 71 2011 9 12
25. H. Mizuno, M. KjellN. Nordgren, T. Pettersson, V. Wallqvist, M. Fielden, and M.W. Rutland Friction measurement between polyester fibres using the fibre probe SPM Aust. J. Chem. 59 2006 390 393 (Pubitemid 44022485)
26. J.A. Nairn Generalized shear-lag analysis including imperfect interfaces Adv. Compos. Lett. 13 2004 263 274 (Pubitemid 40567493)
27. J.A. Nairn Numerical implementation of imperfect interfaces Comput. Mater. Sci. 40 2007 525 536 (Pubitemid 47380303)
28. Nairn, J.A., Le, E., 2009. Numerical modeling and experiments on the role of strand-to-strand interface quality on the properties of oriented strand board. In: Proceedings of the 9th International Conference on Wood Adhesives, Lake Tahoe, USA.
29. N. Nordgren, P. Eronen, M. Österberg, J. Laine, and M.W. Rutland Mediation of the nanotribological properties of cellulose by chitosan adsorption Biomacromolecules 10 2009 645 650
30. N. Nordgren, H. Lönnberg, A. Hult, E. Malmström, and M.W. Rutland Adhesion dynamics for cellulose nanocomposites ACS Appl. Mater. Interfaces 1 2009 2098 2103
31. S.M. Notley, B. Pettersson, and L. Wgberg Direct measurement of attractive van der Waals' forces between regenerated cellulose surfaces in an aqueous environment J. Am. Chem. Soc. 126 2004 13930 13931 (Pubitemid 39447061)
32. K. Oksman, and C. Clemons Mechanical properties and morphology of impact modified polypropylene-wood flour composites J. Appl. Polym. Sci. 67 1998 1503 1513 (Pubitemid 128562687)
33. D.H. Page, F. El-Husseiny, and K. Winkler Behaviour of single wood fibres under axial tensile stress Nature 229 1971 252 253
34. S. Pilla, S. Gong, E.O. Neill, L. Yang, and R.M. Rowell Polylactide-recycled wood fiber composites J. Appl. Polym. Sci. 111 2009 37 47
35. T. Pettersson, N. Nordgren, W. Rutland Mark, and A. Feiler Comparison of different methods to calibrate torsional spring constant and photodetector for atomic force microscopy friction measurements in air and liquid Rev. Sci. Instrum. 78 2007 093702
36. M.J. Pitkethly A round-robin programme on interfacial test methods Compos. Sci. Technol. 48 1992 205 214
37. I. PillN. Montrelay, A. Bourmaud, and Y. Grohens Effect of thermo-mechanical cycles on the physico-chemical properties of poly(lactic acid) Polym. Degrad. Stab. 93 2007 321 328
38. T. Pullawan, A.N. Wilkinson, and S.J. Eichhorn Discrimination of matrix-fibre interactions in all-cellulose nanocomposites Compos. Sci. Technol. 70 2010 2325 2330
39. J. Ralston, I. Larson, M.W. Rutland, A.A. Feiler, and M. Kleijn Atomic force microscopy and direct surface force measurements (IUPAC technical report) Pure Appl. Chem. 77 2005 2149 2170 (Pubitemid 41832271)
40. M.W. Rutland, A. Carambassis, G.A. Willing, and R.D. Neuman Surface force measurements between cellulose surfaces using scanning probe microscopy Colloids Surface A 1997 369 374 (Pubitemid 27292727)
41. J.E. Sader, J.W.M. Chon, and P. Mulvaney Calibration of rectangular atomic force microscope cantilevers Rev. Sci. Instrum. 70 1999 3967 3969 (Pubitemid 129589035)
42. Sandell, R., 2010. Development of a model system for stress transfer evaluation in cellulose composites. MSc Thesis. KTH, Department of Fibre and Polymer Technology.
43. A. Stamboulis, C. Baillie, and E. Schulz Interfacial characterisation of flax fibre-thermoplastic polymer composites by the pull-out test Angew. Makromol. Chem. 272 1999 117 120
44. J. Stiernstedt, N. Nordgren, L. Wgberg, H. Brumer, D.G. Gray, and M.W. Rutland Friction and forces between cellulose model surfaces: a comparison J. Colloid Interface Sci. 303 2006 117 123 (Pubitemid 44436187)
45. E. Thormann, T. Pettersson, and P.M. Claesson How to measure forces with atomic force microscopy without significant influence from nonlinear optical lever sensitivity Rev. Sci. Instrum. 80 2009 093701
46. K. Wilson, and D.J.B. White The Anatomy of Wood: Its Diversity and Variability 1986 Stobart & Son London