Stability analysis of FPGA-based control of brushless DC motors and generators using digital PWM technique

IEEE Transactions on Industrial Electronics

Volumn 59, Issue 1, 2012, Pages 343-351

  Milivojevic, Nikola ^a   Krishnamurthy, Mahesh ^b   Gurkaynak, Yusuf ^b   Sathyan, Anand ^c   Lee, Young Joo ^d   Emadi, Ali ^e  

^a Magdrive Technologies LLC   (United States)

^b ILLINOIS INSTITUTE OF TECHNOLOGY   (United States)

^c CENTRO RICERCHE FIAT   (Italy)

^d WHIRLPOOL CORPORATION   (United States)

^e MCMASTER UNIVERSITY   (Canada)

Author keywords

Brushless dc (BLDC) drives; digital control; pulsewidth modulation (PWM) control; stability analysis

Indexed keywords

BRUSHLESS DC DRIVES; CLOSED LOOP STABILITY; CLOSED-LOOP OPERATION; CONTROL STRATEGIES; CURRENT SENSORS; DIGITAL CONTROL; DIGITAL PULSE-WIDTH MODULATION; DISCRETE MODELS; GENERATING MODE; HYBRID ELECTRIC VEHICLE; HYDRO GENERATOR; INPUT VOLTAGES; INTEGRATED STARTER ALTERNATORS; LOAD DISTURBANCES; LYAPUNOV STABILITY; MECHANICAL RELIABILITY; POTENTIAL STABILITY; PULSE WIDTH MODULATION CONTROL; PWM TECHNIQUES; STABILITY ANALYSIS;

BRUSHLESS DC MOTORS; DIGITAL CONTROL SYSTEMS; ELECTRIC DRIVES; ELECTRIC VEHICLES; ELECTROMAGNETIC PULSE; FIELD PROGRAMMABLE GATE ARRAYS (FPGA); INDUSTRIAL APPLICATIONS; MECHANICAL DRIVES; PULSE WIDTH MODULATION; RELIABILITY ANALYSIS; SYSTEM STABILITY;

STABILITY CRITERIA;

EID: 80053630357     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2011.2146220     Document Type: Article

References (33)

1. A. Emadi, Handbook of Automotive Power Electronics and Motor Drives. Boca Raton, FL: CRC, 2005.
2. T. Kenjo and S. Nagamori, Permanent Magnet Brushless DC Motors. Oxford, U.K.: Clarendon, 1985.
3. I. Boldea, "Control of electric generators: A review," in Proc. 29th IEEE IECON, Nov. 2003, vol. 1, pp. 972-980.
4. J. M. Carrasco, L. G. Franquelo, J. T. Bialasiewicz, E. Galvan, R. C. P. Guisado, M. A. M. Prats, J. I. Leon, and N. Moreno-Alfonso, "Power electronic systems for the grid integration of renewable energy sources - A survey," IEEE Trans. Ind. Electron., vol. 53, no. 4, pp. 1002-1016, Aug. 2006.
5. A. Mirecki, X. Roboam, and F. Richardeau, "Architecture complexity and energy efficiency of small wind turbines," IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 660-670, Feb. 2007.
6. K. T. Chau, C. C. Chan, and C. Liu, "Overview of permanent magnet brushless drives for electric and hybrid electric vehicles," IEEE Trans. Ind. Electron., vol. 55, no. 6, pp. 2246-2257, Jun. 2008.
7. L. Parsa and H. Lei, "Interior permanent magnet motors with reduced torque pulsation," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 602-609, Feb. 2008.
8. M. G. Egan, D. L. O'Sullivan, J. G. Hayes, M. J.Willers, and C. P. Henze, "Power-factor-corrected single-stage inductive charger for electric vehicle batteries," IEEE Trans. Ind. Electron., vol. 54, no. 2, pp. 1217-1226, Apr. 2007.
9. G. O. Cimuca, C. Saudemont, B. Robyns, and M. M. Radulescu, "Control and performance evaluation of a flywheel energy-storage system associated to a variable-speed wind generator," IEEE Trans. Ind. Electron., vol. 53, no. 4, pp. 1074-1085, Aug. 2006.
10. Y.-S. Kung, "Design and implementation of a high performance PMLSM drives using DSP chip," IEEE Trans. Ind. Electron., vol. 55, no. 3, pp. 1341-1351, Mar. 2008.
11. L. Harnefors and M. Hinkkanen, "Complete stability of reduced-order and full-order observers for sensorless IMdrives," IEEE Trans. Ind. Electron., vol. 55, no. 3, pp. 1319-1329, Mar. 2008.
12. L. Harnefors, "Globally stable speed adaptive observers for sensorless induction motor drives," IEEE Trans. Ind. Electron., vol. 54, no. 2, pp. 1243-1245, Apr. 2007.
13. C. Xia, Z. Li, and T. Shi, "A control strategy for four-switch threephase brushless dc motor using single current sensor," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 2058-2066, Jun. 2009.
14. C. W. Hung, C. T. Lin, C. W. Liu, and J. Y. Yen, "Variable-sampling controller for brushless dc motor drives with low-resolution position sensors," IEEE Trans. Ind. Electron., vol. 54, no. 5, pp. 2846-2852, Oct. 2007.
15. S. M. N. Hasan, I. Husain, R. J. Veillette, and J. E. Carletta, "A PM brushless DC starter/generator system for a series-parallel 2 × 2 hybrid electric vehicle," in Conf. Rec. 42nd IEEE IAS Annu. Meeting, 2007, pp. 1686-1693.
16. P. Bajec, B. Pevec, D. Voncina, D. Miljavec, and J. Nastran, "Extending the low-speed operation range of PM generator in automotive applications using novel ac-dc converter control," IEEE Trans. Ind. Electron., vol. 52, no. 2, pp. 436-443, Apr. 2005.
17. T. Sakurai, H. Funato, and S. Ogasawara, "Fundamental characteristics of test facility for micro-hydroelectric power generation system," in Proc. IEEE 6th IPEMC, May 2009, pp. 2612-2617.
18. S. Joshi, A. Gordon, L. Holloway, and L. Chang, "Selecting a high specific speed pump for low head hydro-electric power generation," in Proc. Can. Conf. Elect. Comput. Eng., May 2005, pp. 603-606.
19. J. T. Bialasiewicz, "Furling control for small wind turbine power regulation," in Proc. IEEE Int. Symp. Ind. Electron., 2003, vol. 2, pp. 804-809.
20. Y. R. Chang, C. M. Chan, and C. J. Chang, "The design of control system and power conditioning system for 25 kW active-control based wind turbine system," in Proc. Int. Conf. Power Electron. Drive Syst., 2009, pp. 1272-1276.
21. R. Ghosh and G. Narayanan, "Generalized feedforward control of singlephase PWM rectifiers using disturbance observers," IEEE Trans. Ind. Electron., vol. 54, no. 2, pp. 984-993, Apr. 2007.
22. A. Lazaro, A. Barrado, M. Sanz, V. Salas, and E. Olias, "New power factor correction ac-dc converter with reduced storage capacitor voltage," IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 384-397, Feb. 2007.
23. F. Rodriguez and A. Emadi, "A novel digital control technique for brushless dc motor drives," IEEE Trans. Ind. Electron., vol. 54, no. 5, pp. 2365-2373, Nov. 2007.
24. K. L. Shi and H. Li, "Optimized PWM strategy based on generic algorithms," IEEE Trans. Ind. Electron., vol. 52, no. 5, pp. 1458-1461, Oct. 2005.
25. P. C. Desai and A. Emadi, "A novel digital control technique for brushless DC motor drives: Current control," in Proc. IEEE Elect. Mach. Drives Conf., 2005, pp. 326-331.
26. F. Rodriguez and A. Emadi, "A novel digital control technique for brushless DC motor drives: Steady state and dynamics," in Proc. IEEE Ind. Electron. Conf., Nov. 2006, pp. 1545-1550.
27. A. Sathyan, N. Milivojevic, Y. J. Lee, M. Krishnamurthy, and A. Emadi, "An FPGA-based novel digital PWM control scheme for BLDC motor drives," IEEE Trans. Ind. Electron., vol. 56, no. 8, pp. 3040-3049, Aug. 2009.
28. Y. Shtessel, S. Baev, and H. Biglari, "Unity power factor control in threephase ac/dc boost converter using sliding modes," IEEE Trans. Ind. Electron., vol. 55, no. 11, pp. 3874-3882, Nov. 2008.
29. R.-J. Wai and L.-C. Shih, "Design of voltage tracking control for dc-dc boost converter via total sliding-mode technique," IEEE Trans. Ind. Electron., vol. 58, no. 6, pp. 2502-2511, 2011.
30. G. Foo and M. F. Rahman, "Sensorless direct torque and flux-controlled IPM synchronous motor drive at very low speed without signal injection," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 395-403, Jan. 2010.
31. G. Foo and M. F. Rahman, "Sensorless sliding mode MTPA control of an IPM synchronous motor drive using a sliding-mode observer and HF signal injection," IEEE Trans. Ind. Electron., vol. 57, no. 4, pp. 1270-1278, Apr. 2010.
32. E. Monmasson and M. N. Cirstea, "FPGA design methodology for industrial control systems - A review," IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 1824-1842, Aug. 2007.
33. M. W. Naouar, E. Monmasson, A. A. Naassani, I. S. Belkhodja, and N. Patin, "FPGA-based current controllers for AC machine drives - A review," IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 1907-1925, Aug. 2007