Determination of local material properties of OSB sample by coupling advanced imaging techniques and morphology-based FEM simulation

Holzforschung

Volumn 65, Issue 6, 2011, Pages 811-818

  Sebera, Vaclav ^a   Muszyński, Lech ^b  

^a MENDEL UNIVERSITY IN BRNO   (Czech Republic)

^b OREGON STATE UNIVERSITY   (United States)

Author keywords

digital image correlation; finite element method; inverse problem methodology; morphological modeling; OSB

Indexed keywords

DIGITAL IMAGE CORRELATIONS; FINITE ELEMENT; INVERSE PROBLEM METHODOLOGY; MORPHOLOGICAL MODELING; OSB;

COMPRESSION TESTING; COMPUTER SIMULATION; COMPUTERIZED TOMOGRAPHY; IMAGE ANALYSIS; IMAGE SEGMENTATION; IMAGING TECHNIQUES; INVERSE PROBLEMS; MATERIALS PROPERTIES; MECHANICAL PROPERTIES; MORPHOLOGY; OPTICAL CORRELATION; STRAIN MEASUREMENT;

FINITE ELEMENT METHOD;

EID: 80053603013     PISSN: 00183830     EISSN: 1437434X     Source Type: Journal    
DOI: 10.1515/HF.2011.110     Document Type: Article

References (44)

1. ASTM Standard (2005) D3501-05a. Standard Test Methods for Wood-Based Structural Panels in Compression. American Society for Testing and Materials.
2. Axelsson, M., Svensson, S. (2010) 3D pore structure characterization of paper. Pattern Anal. Appl. 13:159-172.
3. Bache-Wiig, J., Henden, P. Ch. (2005) Individual fiber segmentation of three-dimensional microtomograms of paper and fiber-reinforced composite materials. Master thesis. Paper and Fiber Research Institute, Norway.
4. Badel, É., Perré, P. (2002) Predicting oak wood properties using X-ray inspection: representation, homogenisation and localisation. Part I: digital X-ray imaging and representation by finite elements. Ann. For. Sci. 59:767-776. (Pubitemid 36803445)
5. Badel, É., Perré, P. (2003) Predicting of oak wood properties using X-ray inspection: representation, homogenisation and localisation. Part II: computation of macroscopic properties and microscopic stress fields. Ann. For. Sci. 60:247-257.
6. Badel, É., Delisee, C., Lux, J. (2008) 3D structural characterisation, deformation measurements and assessment of low-density wood fiberboard under compression: the use of X-ray microtomogra-phy. Compos. Sci. Technol. 68:1654-1663.
7. Bucur, V. (2003) Nondestructive Characterization and Imaging of Wood. Springer-Verlag, Berlin.
8. Dai, Ch. (2007) Modeling formation and bonding of wood composites. Presentation presented at FPInnovation-Forintek Division, Vancouver, Canada.
9. De Moura, M.F.S.F., Silva, M.A.L., Morais, J.J.L., de Morais, A.B., Lousada, J.J.L. (2009) Data reduction scheme for measuring GIIc of wood in end-notched flexure (ENF) tests. Holzforschung 63:99-106.
10. Dourado, N.M.M., de Moura, M.F.S.F., Morais, J.J.L., Silva, M.A.L. (2010) Estimate of resistance-curve in wood through the double cantilever beam test. Holzforschung 64:119-126.
11. Faessel, M., Delisee, C., Bos, F., Castera, P. (2005) 3D Modelling of random cellulosic fibrous networks based on X-ray tomography and image analysis. Compos. Sci. Technol. 65:1931-1940. (Pubitemid 41086673)
12. Feraboli, P., Clevelend, T., Stickler, P., Halpin, J. (2010) Stochastic laminate analogy for simulating the variability in modulus of discontinuous composite materials. Compos. Pt. A-Appl. Sci. Manuf. 41:557-570.
13. Forest Product Laboratory (2010) Wood handbook-Wood as an engineering material. General Technical Report FPL-GTR-190. U.S.D.A., Forest Products Laboratory, Madison.
14. Forsberg, F., Mooser, R., Arnold, M., Hack, E., Wyss, P. (2008) 3D micro-scale deformations of wood in bending: synchrotron radiation mCT data analyzed with digital volume correlation. J. Struct. Biol. 164:255-262.
15. Gonzales, R.C., Woods R.E., Eddins, S.L. (2004) Digital Image processing Using Matlab. Pearson Prentice Hall.
16. Grediac, M., Pierron, F. (1998) A T-shaped specimen for the direct characterization of orthotropic materials. Int. J. Numer. Methods Eng. 41:293-309. (Pubitemid 128556868)
17. Haitao, X., Yulong, L., Lingcheng, Z., Weiguo, G. (2009) Nonlinear finite element analysis of the vibration characteristics of the maxillary central incisor related to periodontal attachment. Med. Biol. Eng. Comput. 47:1189-1195.
18. Hindman, P.D., Lee, N.J. (2007) Modeling wood strands as multilayer composites: bending and tension loads. Wood Fiber Sci. 39:515-526.
19. Holmberg, S., Persson, K., Petterson, H. (1999) Nonlinear mechanical behaviour and analysis of wood and fibre materials. Comput. Struct. 72:459-480.
20. Holz, D. (1974) On some important properties of non-modified coniferous and broad leaved woods in view of mechanical and acoustical data in piano soundboards. Arch. Akustyki. 9:37-57.
21. Holz, D. (1981) Zum Alterungsverhalten des Werkstoffes Holz-einige Ansichten, Untersuchungen, Ergebnisse. Holztechnologie 22:80-85.
22. Javoŕk, J. (2000) Numerical simulation of mechanical behavior of wood on microscopic level. MendelNet conference. MU in Brno. p. 43. win Czechx
23. Javoŕk, J. (2002) A numerical model of microstructure of the wood and a structural analysis of the wood. MendelNet conference. MU in Brno. pp. 117-124. win Czechx
24. Kherlopian, R.A., Song, T., Duan, Q., Neimark, M.A., Po, M.J., Gohagan, J.K., Laine, A.F. (2008) A review of imaging techniques for systems biology. BMC Syst. Biol. 2:74.
25. Konas, P. (2003) General concept of finite element (FE) model based on anatomy structure (Part V-probabilistic FEM model of wood). Acta Univ. Agric. et Silvic. Mendel. Brun. 1:69-79.
26. Konas, P., Gryc, V., Vavrćk, H. (2009) 3D visualization and finite element mesh formation from wood anatomy samples, Part I-Theoretical approach. Acta Univ. Agric. et Silvic. Mendel. Brun. 1:1-16.
27. Lecompte, D., Sol, H., Vantomme, J., Habraken, A.M. (2005) Identification of Elastic Orthotropic Material Parameters Based on ESPI Measurements. SEM Annual Conference & Exposition on Experimental and Applied Mechanics. Portland, USA, 1-7.
28. Li, P., Dai, Ch., Wang, S. (2009) A simulation of void variation in wood-strand composites during consolidation. Holzforschung 63:357-361.
29. Lindgren, L.O. (1985) On the relationship between density/moisture content in wood and X-ray attenuation in computer tomography. Proceedings 5th Symposium Nondestructive testing of wood; Washington state university, Eng. Publishing, Pullman, pp 193-203.
30. Ludwig, W., King, A., Reischig, P., Herbig, M., Lauridsen, E.M., Schmidt, S., Proudhon, H., Forest, S., Cloetens, P., Rolland du Roscoat, S., Buffière, J.Y., Marrow, T.J., Poulsen, H.F. (2009) New opportunities for 3D materials science of polycrystalline materials at the micrometre lengthscale by combined use of X-ray diffraction and X-ray imaging. Mat. Sci. Eng. A-Struct. 24:69-76.
31. Lüpke, M., Gardemin, M., Kopke, S., Seifert, H., Staczyk, C. (2010) Finite element analysis of the equine periodontal ligament under masticatory loading. Wien. Tierarz. Monats. 97:101-106.
32. Mackerle (2005) Finite element analyses in wood research: a bibliography. Wood Sci. Technol. 39:579-600.
33. Muszyński, L. (2009) Is what you see all you can get? Bridging experimentation and modelling with advanced imaging techniques. In proceedings of the Final Conference of COST Action E49: processes and Performance of Wood-based Panels, Nantes, France, September 14-15, (Ed. M. Irle): 71-83.
34. Muszyński L., Launey, M.E. (2010) Advanced imaging techniques in wood-based panels research. In: Wood-Based Panels-An Introduction for Specialists. State-of-the-Art in Wood-Based Panels Research. COST Action E49:177-201.
35. Nairn, J. (2006) Numerical Simulations of Transverse Compression and Densification in Wood. Wood Fiber Sci. 38:576-591. (Pubitemid 44782432)
36. Nairn, J.A. (2007) Material point method simulations of transverse fracture in wood with realistic morphologies. Holzforschung 61:375-381. (Pubitemid 46910955)
37. Pan, B., Qian, K., Xie, H., Asundi, A. (2009) Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review. Meas. Sci. Technol. 20:1-17.
38. Perre, P. (2005) Meshpore: a software able to apply image-based meshing techniques to anisotropic and heterogeneous porous media. Dry. Technol. 23:1993-2006. (Pubitemid 41490131)
39. Pierron, F., Grediac, M. (2000) Identification of the through-thickness moduli of thick composites from whole-field measurements using the Iosipescu fixture: theory and simulations. Compos. Pt. A-Appl. Sci. Manuf. 31:309-318. (Pubitemid 30576621)
40. Smith, I., Snow, M., Asiz, A., Vasic, S. (2007) Failure mechanisms in wood-based materials: a review of discrete, continuum, and hybrid finite-element representations. Holzforschung 61:352-359. (Pubitemid 46910953)
41. Sutton, M.A. (2008) Digital image correlation for shape and deformation measurements. In: Springer handbook of experimental solid mechanics. Ed. Sharpe, W.N. Springer-Verlag, Heidelberg. pp. 565-600.
42. Trtik, P., Dual, J., Keunecke, D., Mannes, D., Niemz, P., Stähli, P., Kaestner, A., Groso, A., Stampanoli, M. (2007) 3D imaging of microstructure of spruce wood. J. Struct. Biol. 159:46-55. (Pubitemid 46887690)
43. Vavrćk, H., Gryc, V., Rybńcek, M. (2008) Variability of selected physical and mechanical properties of English oak wood. Influence of age, trunk radius and height. Lesnická práce, s.r.o., Kos-telec nad Cernými lesy. win Czechx
44. Zombori, B.G., Kamke, F.A., Watson, L.T. (2001) Simulation of the mat formation process. Wood Fiber Sci. 33:564-579. (Pubitemid 33617649)