Optimization and characterization of electroless co-deposited PdRu membranes: Effect of the plating variables on morphology

Journal of Membrane Science

Volumn 382, Issue 1-2, 2011, Pages 252-261

  Braun, Fernando ^a   Tarditi, Ana M ^a   Cornaglia, Laura M ^a  

^a INSTITUTO DE INVESTIGACIONES EN CATÁLISIS Y PETROQUÍMICA   (Argentina)

Author keywords

Co deposition; Electroless plating; PdRu membrane

Indexed keywords

AGITATION SPEED; CODEPOSITION; DEFECT-FREE; ELECTROLESS; ELECTROLESS CO-DEPOSITION; HIGH CONCENTRATION; HYDROGEN PERMEABILITY; HYDROGEN PERMEATION; OPTIMIZED CONDITIONS; PDRU MEMBRANE; POROUS STAINLESS STEEL SUBSTRATE; TEMPERATURE RANGE; TRANSMEMBRANE PRESSURES;

COBALT; ELECTROLESS PLATING; HYDROGEN; MEMBRANES; MORPHOLOGY; OPTIMIZATION; PHOTOELECTRON SPECTROSCOPY; SCANNING ELECTRON MICROSCOPY; SPECTROMETERS; X RAY DIFFRACTION; X RAY PHOTOELECTRON SPECTROSCOPY;

STAINLESS STEEL;

EDETIC ACID; HYDRAZINE; HYDROGEN; PALLADIUM; RUTHENIUM; STAINLESS STEEL;

ARTICLE; CHEMICAL COMPOSITION; COMPOSITE MATERIAL; CONCENTRATION RESPONSE; ELECTRODE; FILM; GAS PERMEABILITY; MEMBRANE; MEMBRANE PERMEABILITY; MEMBRANE STRUCTURE; MORPHOLOGY; PH; PRESSURE; PRIORITY JOURNAL; PROCESS OPTIMIZATION; SCANNING ELECTRON MICROSCOPY; SPECTROMETER; SURFACE PROPERTY; SYNTHESIS; TEMPERATURE; TEMPERATURE SENSITIVITY; X RAY DIFFRACTION; X RAY PHOTOELECTRON SPECTROSCOPY;

EID: 80052729950     PISSN: 03767388     EISSN: 18733123     Source Type: Journal    
DOI: 10.1016/j.memsci.2011.08.019     Document Type: Article

References (45)

1. Chen C.-H., Ma Y.H. The effect of H2S on the performance of Pd and Pd/Au composite membrane. J. Membr. Sci. 2010, 362:535-544.
2. Shi L., Goldbach A., Zeng G., Xu H. Preparation and performance of thin-layered PdAu/ceramic composite membranes. Int. J. Hydrogen Energy 2010, 35:4201-4208.
3. O'Brien C.P., Howard B.H., Miller J.B., Morreale B.D., Gellman A.J. Inhibition of hydrogen transport through Pd and Pd47Cu53 membranes by H2S at 350°C. J. Membr. Sci. 2010, 349:380-384.
4. Okazaki J., Pacheco Tanaka D.A., Llosa Tanco M.A., Wakui Y., Mizukami F., Suzuki T.M. Hydrogen permeability study of the thin Pd-Ag alloy membranes in the temperature range across the α-β phase transition. J. Membr. Sci. 2006, 282:370-374.
5. Okuno K. Application of electroless Ru deposits for electronics materials. Plat. Surf. Finish. 1990, 77:48-52.
6. Mallory G.O., Hajdu J.B. Electroless Plating - Fundamentals and Applications 1990, American Electroplaters and Surface Finishers Society, New York.
7. Mishchenko A.P., Sarylova M.E., Litvinov I.A., Bezruk L.I., Gryaznov V.M. Influence of heat-treatment conditions on formation of pore structure of surface layer of palladium-ruthenium alloy foil. Russ. Chem. Bull. 1985, 34:475-478.
8. Gade S.K., Keeling M.K., Davidson A.P., Hatlevik O., Way J.D. Palladium-ruthenium membranes for hydrogen separation fabricated by electroless co-deposition. Int. J. Hydrogen Energy 2009, 34:6484-6491.
9. Pomerantz N., Ma Y.H. Effect of H2S on the performance and long-term stability of Pd/Cu membranes. Ind. Eng. Chem. Res. 2009, 48:4030-4039.
10. Ryi S.-K., Li A., Lim C.J., Grace J.R. Novel non-alloy Ru/Pd composite membrane fabricated by electroless plating for hydrogen separation. Int. J. Hydrogen Energy 2011, 36:9335-9340.
11. Wang L., Yoshiie R., Uemiya S. Fabrication of novel Pd-Ag-Ru/Al2O3 ternary alloy composite membrane with remarkably enhanced H2 permeability. J. Membr. Sci. 2007, 306:1-7.
12. Nam S.W., Yoon S.P., Ha H.Y., Hong S., Maganyuk A.P. Methane steam reforming in a Pd-Ru membrane reactor. Korean J. Chem. Eng. 2000, 17:288-291.
13. Paturzo L., Gallucci F., Basile A., Pertici P., Scalera N., Vitulli G. Partial oxidation of methane in a catalytic ruthenium membrane reactor. Ind. Eng. Chem. Res. 2003, 42:2968-2974.
14. Gryaznov V.M., Serebryannikova O.S., Serov Y.M., Ermilova M.M., Karavanov A.N., Mischenko A.P., Orekhova N.V. Preparation and catalysis over palladium composite membranes. J. Membr. Sci. 1993, 77:284.
15. Uemiya S., Matsuda T., Kikuchi E. Hydrogen permeable palladium-silver alloy membrane supported on porous ceramics. J. Membr. Sci. 1991, 56:315-325.
16. Tong J., Shirai R., Kashima Y., Matsumura Y. Preparation of a pinhole-free Pd-Ag membrane on a porous metal support for pure hydrogen separation. J. Membr. Sci. 2005, 260:84-89.
17. Bosko M.L., Yepes D., Irusta S., Eloy P., Ruiz P., Lombardo E.A., Cornaglia L.M. Characterization of Pd-Ag membranes after exposure to hydrogen flux at high temperatures. J. Membr. Sci. 2007, 306:56-65.
18. Lin W.-H., Chang H.-F. Characterizations of Pd-Ag membrane prepared by sequential electroless deposition. Surf. Coat. Technol. 2005, 194:157-166.
19. Keuler J.N., Lorenzen L., Sanderson R.D., Prozesky V., Przybylowicz W.J. Characterization of electroless plated palladium-silver alloy membranes. Thin Solid Films 1999, 347:91-98.
20. Cheng Y.S., Yeung K.L. Palladium-silver composite membranes by electroless plating technique. J. Membr. Sci. 1999, 158:127-141.
21. Shu J., Grandjean B.P.A., Ghali E., Kaliaguine S. Simultaneous deposition of Pd and Ag on porous stainless steel by electroless plating. J. Membr. Sci. 1993, 77:181-195.
22. Brenner J.R., Bhagat G., Vasa P. Hydrogen purification with palladium and palladium alloys on porous stainless steel membranes. Int. J. Oil Gas Coal Technol. 2008, 1:109-125.
23. Chen H.-I., Chu C.-Y., Huang T.-C. Characterization of PdAg/Al2O3 composite membrane by electroless co-deposition. Thin Solid Films 2004, 460:62-71.
24. Pacheco Tanaka D.A., Llosa Tanco M.A., Niwa S.-i., Wakui Y., Mizukami F., Namba T., Suzuki T.M. Preparation of palladium and silver alloy membrane on a porous a-alumina tube via simultaneous electroless plating. J. Membr. Sci. 2005, 247:21-27.
25. Yepes D., Cornaglia L.M., Irusta S., Lombardo E.A. Different oxides used as diffusion barriers in composite hydrogen permeable membranes. J. Membr. Sci. 2006, 274:92-101.
26. Ayturk M.E., Engwall E.E., Ma Y.H. Microstructure analysis of the intermetallic diffusion-induced alloy. Ind. Eng. Chem. Res. 2007, 46:4295-4306.
27. Ayturk M.E., Ma Y.H. Electroless Pd and Ag deposition kinetics of the composite Pd and Pd/Ag membranes synthesized from agitated plating baths. J. Membr. Sci. 2009, 330:233-245.
28. Li A., Grace J.R., Lim C.J. Preparation of thin Pd-based composite membrane on planar metallic substrate: Part I: Pre-treatment of porous stainless steel substrate. J. Membr. Sci. 2007, 298:175-181.
29. Ma Y.H., Akis B.C., Ayturk M.E., Guazzone F., Enqwall E.E., Mardilovich I.P. Characterization of intermetallic diffusion barrier and alloy formation for Pd/Cu and Pd/Ag porous stainless steel composite membranes. Ind. Eng. Chem. Res. 2004, 43:2936-2945.
30. Bosko L.M., Miller J.B., Lombardo E.A., Gellman A., Cornaglia L.M. Surface characterization of Pd-Ag composite membranes after annealing at various temperatures. J. Membr. Sci. 2011, 369:267-276.
31. Yeung K.L., Christiansen S.C., Varma A. Palladium composite membranes by electroless plating technique: relationships between plating kinetics, film microstructure and membrane performance. J. Membr. Sci. 1999, 159:107-122.
32. Bhandari R., Ma Y.H. Pd-Ag membrane synthesis: the electroless and electro-plating conditions and their effect on the deposits morphology. J. Membr. Sci. 2009, 334:50-63.
33. Dogan M., Kilicarslan S. Effects of process parameters on the synthesis of palladium membranes. Nucl. Instr. Methods Phys. Res. B 2008, 266:3458-3466.
34. Cullity B.D., Stock S.R. Elements of X-ray Diffraction 2001, Prentice-Hall. 3rd ed.
35. Tarditi A.M., Cornaglia L.M. Novel PdAgCu ternary alloy as promising materials for hydrogen separation membranes: synthesis and characterization. Surf. Sci. 2011, 605:62-71.
36. Mekonnen W., Arstad B., Klette H., Walmsley J.C., Bredesen R., Benvik H., Holmestad R. Microstructural characterization of self-supported 1.6μm Pd/Ag membranes. J. Membr. Sci. 2008, 310:337-348.
37. Mun C., Ehrhardt J.J., Lambert J., Madic C. XPS investigations of ruthenium deposited onto representative inner surfaces of nuclear reactor containment buildings. Appl. Surf. Sci. 2007, 253:7613-7621.
38. Sakamoto Y., Chen F.L., Kinari Y., Sakamoto F. Effect of carbon monoxide on hydrogen permeation in some palladium-based alloy membranes. Int. J. Hydrogen Energy 1996, 210:1017-1024.
39. Gallucci F., Chiaravalloti F., Tosti S., Drioli E., Basile A. The effect of mixture gas on the hydrogen permeation through a palladium membrane: experimental studies and theoretical approach. Int. J. Hydrogen Energy 2007, 32:1837-1845.
40. Wrobel R.J., Becker S. Carbon and sulphur on Pd (111) and Pt (111): experimental problems during cleaning of the substrates and impact of sulphur on the redox properties of CeOx in the CeOx/Pd (111) system. Vacuum 2010, 84:1258-1265.
41. Mardilovich I.P., She Y., Ma Y.H., Rei M.H. Defect-free palladium membranes on porous stainless-steel support. AIChE J. 1998, 44:310-322.
42. Rothenberger K.S. The permeability of hydrogen in bulk palladium at elevated temperatures and pressures. J. Membr. Sci. 2003, 212:87-97.
43. Foletto E.L., Wirbitzki da Silveira J.V., Jahn S.L. Preparation of palladium-silver alloy membranes for hydrogen permeation. Latin Am. Appl. Res. 2008, 38:79-84.
44. Tong J., Su L., Kashima Y., Shirai R., Suda H., Matsumura Y. Simultaneously depositing Pd-Ag thin membrane on asymmetric porous stainless steel tube and application to produce hydrogen from steam reforming of methane. Ind. Eng. Chem. Res. 2006, 45:648-655.
45. Zhang K., Wei X., Rui Z., Li Y., Lin Y.S. Effect of metal-support interface on hydrogen permeation through palladium membranes. AIChE J. 2009, 55:630-639.