Simultaneously depositing Pd-Ag thin membrane on asymmetric porous stainless steel tube and application to produce hydrogen from steam reforming of methane

Industrial and Engineering Chemistry Research

Volumn 45, Issue 2, 2006, Pages 648-655

  Tong, Jianhua ^a,b   Su, Lingling ^b   Kashima, Yukari ^a   Shirai, Ryuichi ^a   Suda, Hiroyuki ^b   Matsumura, Yasuyuki ^b  

^a RESEARCH INSTITUTE OF INNOVATIVE TECHNOLOGY FOR THE EARTH   (Japan)

^b NATIONAL INSTITUTE OF ADVANCED INDUSTRIAL SCIENCE AND TECHNOLOGY AIST   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

ARGON; CATALYST SELECTIVITY; ELECTROLESS PLATING; ELECTROPLATING; HYDROGEN; MECHANICAL PERMEABILITY; METHANE; MICROANALYSIS; POROUS MATERIALS; PRESSURE EFFECTS; REACTION KINETICS; REFORMING REACTIONS; STAINLESS STEEL; X RAY DIFFRACTION;

ASYMMETRIC POROUS STAINLESS STEEL (APSS) TUBES; ELECTRON PROBE MICROANALYSIS; GAS-EXCHANGING CYCLES; PERMEATION FLUX; TEMPERATURE-CHANGING CYCLES;

PALLADIUM ALLOYS;

ARGON; CATALYST SELECTIVITY; ELECTROLESS PLATING; ELECTROPLATING; HYDROGEN; MECHANICAL PERMEABILITY; METHANE; MICROANALYSIS; PALLADIUM ALLOYS; POROUS MATERIALS; PRESSURE EFFECTS; REACTION KINETICS; REFORMING REACTIONS; STAINLESS STEEL; X RAY DIFFRACTION;

EID: 31644438986     PISSN: 08885885     EISSN: None     Source Type: Journal    
DOI: 10.1021/ie050935u     Document Type: Article

References (39)

1. Shu, J.; Grandjean, B. P. A.; Ghali, E.; Kaliaguine, S. Simultaneous deposition of Pd and Ag on porous stainless steel by electroless plating. J. Membr. Sci. 1993, 77, 181.
2. Gobina, E. N.; Oklany J. S.; Hughes, R. Elimination of ammonia from coal-gasification streams by using a catalytic membrane reactor. Ind. Eng. Chem. Res. 1995, 34, 3777.
3. Paglieri, S. N.; Way, J. D. Innovations in palladium membrane research. Sep. Purif. Methods. 2002, 31, 1.
4. Tong, H. D.; Gielens, F. C.; Gardeniers, J. G. E.; Jansen, H. V.; van Rijn, C. J. M.; Elwenspoek, M. C.; Nijdam, W. Microfabricated palladium-silver alloy membranes and their application in hydrogen separation. Ind. Eng. Chem. Res. 2004, 43, 4182.
5. Ma, Y. H.; Akis, B. C.; Ayturk, M. E.; Guazzone, F. Characterization of intermetallic diffusion barrier and alloy formation for Pd/Cu and Pd/Ag porous stainless steel composite membranes. Ind. Eng. Chem. Res. 2004, 43, 2936.
6. Kamakoti, P.; Morreale, B. D.; Ciocco, M. V.; Howard, B. H.; Killmeyer, R. P.; Cugini, A. V.; Sholl, D. S. Prediction of hydrogen flux through sulfur-tolerant binary alloy membranes. Science 2005, 307, 569.
7. Li, Z. Y.; Maeda, H.; Kusakabe, K.; Morooka, S.; Anzai, H.; Akiyama, S. Preparation of palladium-silver alloy membranes for hydrogen separation by the spray pyrolysis method. J. Membr. Sci. 1993, 78, 247.
8. Jayaraman, V.; Lin, Y. S. Synthesis and hydrogen permeation properties of ultrathin palladium-silver alloy membranes. J. Membr. Sci. 1995, 104, 251.
9. Xomeritakis, G.; Lin, Y. S. Fabrication of thin metallic membranes by MOCVD and sputtering. J. Membr. Sci. 1997, 133, 217.
10. O'Brien, J.; Hughes, R.; Hisek, J. Pd/Ag membranes on porous alumina substrates by unbalanced magnetron sputtering. Surf. Coat. Technol. 2001, 142-144, 253.
11. Uemiya, S.; Sato, N.; Ando, H.; Kude, Y.; Matsuda, T.; Kikuchi, E. Separation of hydrogen through palladium thin film supported on a porous glass tube. J. Membr. Sci. 1991, 56, 303.
12. Jemaa, N.; Shu, J.; Kaliaguine, S.; Grandjean, B. P. A. Thin Palladium Film Formation on Shot Peening Modified Porous Stainless Steel Substrates. Ind. Eng. Chem. Res. 1996, 35, 973.
13. Li, A. W.; Liang, W. Q.; Hughes, R. Characterisation and permeation of palladium/stainless steel composite membranes. J. Membr. Sci. 1998, 149, 259.
14. Roa, F.; Way, J. D. Influence of Alloy Composition and Membrane Fabrication on the Pressure Dependence of the Hydrogen Flux of Palladium-Copper Membranes. Ind. Eng. Chem. Res. 2003, 42, 5827.
15. Tong, J. H.; Matsumura, Y. Thin Pd membrane prepared on macroporous stainless steel tube filter by an in-situ multidimensional plating mechanism. Chem. Commun. 2004, 2460.
16. Tong, J. H.; Suda, H.; Haraya, K.; Matsumura, Y. A novel method for the preparation of thin dense Pd membrane on macroporous stainless steel tube filter. J. Membr. Sci. 2005, 260, 10.
17. Cheng, Y. S.; Yeung, K. L.; Palladium-silver composite membranes by electroless plating technique. J. Membr. Sci. 1999, 158, 127.
18. Zhao, H. B.; Xiong, G. X.; Baron, G. V. Preparation and characterization of palladium-based composite membranes by electroless plating and magnetron sputtering. Catal. Today 2000, 56, 89.
19. 3 composite membrane by electroless co-deposition. Thin Solid Films 2004, 460, 62.
20. Lin, W. H.; Chang, H. F. Characterizations of Pd-Ag membrane prepared by sequential electroless deposition. Surf. Coat. Technol. 2005, 194, 157.
21. Nam, S. E.; Lee, S. H.; Lee, K. H. Preparation of a palladium alloy composite membrane supported in a porous stainless steel by vacuum electrodeposition. J. Membr. Sci. 1999, 153, 163.
22. Nam, S. E.; Lee, K. H. Preparation and Characterization of Palladium Alloy Composite Membranes with a Diffusion Barrier for Hydrogen Separation. Ind. Eng. Cliem. Res. 2005, 44, 100.
23. Hasler P.; Allmendinger, T. Electrodeposition of thin Pd - Ag films. Surf. Coat. Technol. 1993, 55, 179.
24. Chen, S. H.; Xing, P. F.; Zhao, P. J.; Chen, W. M. A palladium alloy composite membrane for the purification of hydrogen isotopes. Sep. Sci. Technol. 2002, 37, 2701.
25. Dittmeyer, R.; Höllein, V.; Daub, K. Membrane reactors for hydrogenation and dehydrogenation processes based on supported palladium. J. Mol. Catal. A: Chem. 2001, 173, 135.
26. Mardilovich, I. P, Engwall, E.; Ma, Y. H. Dependence of hydrogen flux on the pore size and plating surface topology of asymmetric Pd-porous stainless steel membranes. Desalination 2002, 144, 85.
27. Iliuta, M. C.; Grandjean, B. P. A.; Larachi, F. Methane Nonoxidative Aromatization over Ru-Mo/HZSM-5 at Temperatures up to 973 K in a Palladium-Silver/Stainless Steel Membrane Reactor. Ind. Eng. Chem. Res. 2003, 42, 323.
28. Lee, D. W.; Lee, Y. G.; Nam, S. E.; Ihm, S. K.; Lee, K. H. Study on the variation of morphology and separation behavior of the stainless steel supported membranes at high temperature. J. Membr. Sci. 2003, 220, 137.
29. Tong, J. H.; Kashima, Y.; Shirai, R.; Suda, H.; Matsumura, Y. Thin Defect-Free Pd Membrane Deposited on Asymmetric Porous Stainless Steel Substrate. Ind. Eng. Chem. Res. 2005, 44, 8025.
30. Tong, J. H.; Matsumura, Y.; Suda, H.; Haraya, K. Experimental Study of Steam Reforming of Methane in a Thin (6 μm) Pd-Based Membrane Reactor. Ind. Eng. Chem. Res. 2005, 44, 1454.
31. Mardilovich, P. P.; She, Y.; Ma, Y. H.; Rei, M. H. Defect-free palladium membranes on porous stainless steel support. AIChE J. 1998, 44, 310.
32. Wang, D.; Tong, J. H.; Xu, H. Y.; Matsumura, Y. Preparation of palladium membrane over porous stainless steel tube modified with zirconium oxide. Catal. Today 2004, 93-95, 689.
33. Tosti, S.; Bettinali, L.; Castelli, S.; Sarto, F.; Scaglione, S.; Violante, V. Sputtered, electroless, and rolled palladium-ceramic membranes. J. Membr. Sci. 2002, 196, 241.
34. Gallucci, F.; Paturzo, L.; Famà, A.; Basile, A. Experimental study of the methane steam reforming reaction in a dense Pd/Ag membrane reactor. Ind. Eng. Chem. Res. 2004, 43, 928.
35. Tong, J. H.; Matsumura, Y. Effect of catalytic activity on methane steam reforming in hydrogen-permeable membrane reactor. Appl. Catal., A 2005, 286, 226.
36. Uemiya, S.; Sato, N.; Ando, H.; Matsuda, T.; Kikuchi, E. Steam reforming of methane in a hydrogen-permeable membrane reactor. Appl. Catal. 1991, 67, 223.
37. Shu, J.; Grandjean, B. P. A.; Kaliaguine, S. Methane steam reforming in asymmetric Pd- and Pd-Ag/porous SS membrane reactors. Appl. Catal., A 1994, 119, 305.
38. Lin, Y. M.; Lee, G. L.; Rei, M. H. An integrated purification and production of hydrogen with a palladium membrane-catalytic reactor. Catal. Today 1998, 44, 343.
39. Kikuchi, E. Palladium/ceramic membranes for selective hydrogen permeation and their application to membrane reactor. Catal. Today 1995, 25, 333.