Remaining useful life, technical health, and life extension

Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability

Volumn 225, Issue 2, 2011, Pages 219-231

  Vaidya, P ^a   Rausand, M ^a  

^a NORWEGIAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Norway)

Author keywords

Life extension; Prognostics; Remaining useful life; Technical health

Indexed keywords

DECISION MAKING; GAS INDUSTRY;

AVIATION INDUSTRY; EXPERT OPINION; INFLUENCING FACTOR; MULTIDISCIPLINARY PROBLEMS; OPERATIONAL CONDITIONS; OVERALL-MODEL; PHYSICS-BASED MODELLING; PROGNOSTICS; REMAINING USEFUL LIVES; SENSOR DATA; SUBSEA OIL; TECHNICAL HEALTH;

HEALTH;

EID: 80051916612     PISSN: 1748006X     EISSN: 17480078     Source Type: Journal    
DOI: 10.1177/1748007810394557     Document Type: Article

References (61)

1. Marcus, B. Condition Based System Technology - where is development heading? In Proceedings of the 17th European Maintenance Congress (Euro Maintenance), Spain, 2004.
2. OSA-CBM V3.3.1 Production, http://www.mimosa.org/?q=resources/specs/osa- cbm-v331-production, 2010.
3. Condition Monitoring and Diagnostics of Machines Prognostics Part 1: ISO 13381-1 General Guidelines, 2004 (International Organization for Standardization, Geneva).
4. Jardine, A. K. S., Daming, L., and Banjevik, D. A review on machinery diagnostics and prognostics implementing condition-based maintenance. Mech. Systems Signal Proc., 2006, 20, 1483-2510.
5. Farrar, C. R. and Lieven, N. N. J. Damage prognosis: The future of structural health monitoring. Philos. Trans. Royal Soc., 2006, 365, 623-632.
6. Vaidya, P. and Rausand, M. Life extension of machinery in the oil and gas industry. In Proceedings of European Safety and Reliability Conference ESREL, Praha, 2009.
7. Vaidya, P. and Rausand, M. Technical health - in the context of Condition Based Maintenance. In Proceedings of European Safety and Reliability Conference ESREL, Greece 2010.
8. Rausand, M. and Høyland, A. System Reliability Theory - Models, Statistical Methods, Applications, 2nd edition, 2004 (Wiley, Hoboken, NJ).
9. Karassik, I. J., Messina, J. P., Cooper, P., and Heald, C. C. Pump Handbook, 3rd edition, 2001 (McGraw-Hill).
10. Aven, T. Perspectives on a risk in a decision making context - review and discussion. Safety Sci., 2009, 47(6), 798-806.
11. Lindley, D. V. Understanding Uncertainty, 2007, (Wiley, Hoboken, NJ).
12. Niewhof, G. G. E. The concept of failure in reliability engineering. Reliability Engng., 1984, 7, 53-59.
13. Reinertsen, R. Residual life of technical systems; diagnosis, prediction and life estimation. Reliability Engng Syst. Safety, 1996, 54, 23-34. (Pubitemid 126371065)
14. Bolch, H. P. and Geiter, F. K. An Introduction to Machinery Reliability Assessment, 1994 (Gulf Publishing Company, Houston, TX).
15. Singpurwalla, N. D. Survival in dynamic environments. Statist Sci., 1995, 10(1), 86-103.
16. Modarres, M. Risk Analysis in Engineering - Techniques Tools, Trends, 2006, (Taylor and Francis Group, Boca Raton, FL).
17. Gelman, A., Carlin, J. B., Stern, H. S., and Rubin, D. B. Bayesian Data Analysis, 1995, (Chapman and Hall, New York).
18. MIL-HDBK-217F. Military Handbook Reliability Prediction of Electronic Equipment, 1991 (Department of Defence, Washington, DC).
19. Singpurwalla, N. D. Survival in dynamic environments. Statist. Sci., 1995, 1(10), 86-103.
20. Cox, D. Regression models and life tables. J. Roy. Statist. Soc., Series B (Methodological), 1972, 34(2), 187-220.
21. Newby, M. Perspectives on Weibull proportional hazards model. IEEE Trans. Reliability, 1994, 43(2), 217-223.
22. Singpurwalla, N. D. and Wilson, S. P. The Exponential Formula of Reliability and Survival: Does it Always Hold? Lifetime Data Analysis, vol. 1, 1995, pp. 187-194 (Springer, The Netherlands).
23. Kumar, D. and Westberg, U. Proportional hazards modelling of time dependent covariates using linear regression. IEEE Trans. Reliability, 1996, 45, 386-392. (Pubitemid 126771044)
24. Volk, P. J., Coetzee, J. L., Banjevic, D., and Jardine, A. A. S. Optimal component replacement decision using vibration monitoring and PHM. J. Operat. Res. Soc., 2002, 53(2), 193-202. (Pubitemid 34473509)
25. Wang, W. A model to predict the residual life of rolling element bearings given monitored condition monitoring information to date. IMA J. Managem. Math., 2002, 13, 3-16. (Pubitemid 34775587)
26. Noortwijk, J. J. V. A survey of the application of gamma processes in maintenance. Reliability Engng Syst. Safety, 2009, 94(1), 2-21.
27. Grall, A., Berenguer, C., and Dieulle, L. A conditionbased maintenance policy for stochastically deteriorating systems. Reliability Engng Syst. Safety, 2002, 76(2), 167-180. (Pubitemid 34524751)
28. Dieulle, L., Berenguer, A., Grall, A., and Roussignol, M. Sequential condition based maintenance scheduling for a deteriorating system. Eur. J. Operat. Res., 2003, 150(2), 451-461.
29. Lawless, J. and Crowder, M. Covariates and random effects in a gamma process model with application to degradation and failure. Lifetime Data Anal., 2004, 10(3), 213-222.
30. Dieulle, L., Berenguer, C., Grall, A., and Roussignol, M. Asymptotic failure rate of a continuously monitored system. Reliability Engng Syst. Safety, 2006, 91(2), 126-130. (Pubitemid 41394411)
31. Kallen, M. J. and Van Noortwijk, J. M. Optimal periodic inspection of a deteriorating process with sequential condition states. Int. J. Pressure Vessels Piping, 2006, 83, 249-255.
32. Pandey, M. D., Yuan, X. X., and Noortwijk, J. M. A comparison of probabilistic deterioration models for lifecycle management of structures. Struct. Infrastruct. Engng., 2009, 5(2), 145-156.
33. Abdel-Hameed, M. A gamma wear process. IEEE Trans. Reliability, 1975, 24, 152-153.
34. Whitemore, G. A. and Schenkelberg, F. Modelling accelerated degradation data using Weiner diffusion with a time scale transformation. Lifetime Data Anal., 1997, 3, 27-45. (Pubitemid 127479319)
35. Doksum, K. A. and Høyland, A. Models for variablestress accelerated life testing experiments based on Weiner processes and inverse Gaussian distribution. Technometrics, 1992, 34, 74-82.
36. Newby, M. and Barker, C. T. A bivariate process model for maintenance and inspection planning. Int. J. Pressure Vessels Piping, 2006, 83(4), 270-275.
37. Barker, C. and Newby, M. Optimal non-periodic inspection for multivariate degradation model. Reliability Engng Syst. Safety, 2009, 94(1), 33-43.
38. Revuz, D. and Yor, M. Continuous Martingales and Brownian Motion - A Series of Comprehensive Studies in Mathematics, 3rd edition, vol. 293, 1999 (Springer-Verlag, Berlin).
39. Siddique, A., Yadava, G. S., and Sing, B. Applications of artificial intelligence techniques for induction machine stator fault diagnosis review. In Proceedings of IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, NY, pp. 29-34, 2003.
40. Baruah, P. and Chinnam, R. B. HMM for diagnostic and prognostics in maintenance process. Int. J. Production Res., 2005, 43(6), 1275-1293.
41. Lin, D. and Makis, V. Filters and parameter estimation for a partially observable system subject to random failure with continuous range observations. Adv. Appl. Probabil., 2004, 36, 1212-1230. (Pubitemid 40195945)
42. Dasgupta, A. and Pecht, M. Material failure mechanisms and damage models. IEEE Trans. Reliability, 1991, 40(5), 531-536.
43. Gertler, J. J. Fault Detection and Diagnosis in Engineering Systems, 1998 (Marcel Dekker Inc, Basel Switzerland).
44. Frank, P. M. Fault diagnosis in dynamic systems using analytical and knowledge based redundancy - A survey and some new results. Automatica, 1990, 26, 459-474.
45. Williams, J. H., Davis, A., and Drake, P. R. Condition Based Maintenance and Machine Diagnostics, 1994 (Chapman and Hall, London).
46. Howard, I., Jia, S., and Wang, J. The dynamic modelling of a spur gear in mesh including friction and a crack. Mech. Syst. Signal Proc., 2001, 15, 831-838.
47. Bartelmus, W. Diagnostic information on gearbox condition for Techtronic systems. Trans. Inst. Measurement Control, 2003, 25, 451-465.
48. Loparo, K. A., Adams, M. A., and Lin, W. Fault detection and diagnosis of rotating machinery. IEEE Trans. Industrial Electronics, 2000, 47, 1005-1014.
49. Kurfess, Y., Li, T. R., and Liang, S. Y. Stochastic prognostics for rolling elements bearing. Mech. Syst. Signal Proc., 2000, 14, 747-762.
50. Oppenheimer, C. H. and Loparo, K. A. Physically based diagnosis and prognosis of cracked rotor shaft. In Proceedings of Component and Systems Diagnostics, Prognostics, Health Management II, 4733-Bellingham, 2002, pp. 122-132. (Pubitemid 35275147)
51. Kozin, F. and Bogdanoff, J. L. Probabilistic models of fatigue crack growth: Results and speculations. Nuclear Engng Design, 1989, 115, 143-171.
52. Bigerelle, M. and Iost, M. Bootstrap analysis of FCGR, application to Paris relationship and to life prediction. Int. J. Fatigue, 1999, 21, 299-307.
53. Walker, J. R. A probabilistic approach to leak before break in Candu pressure tubes. Int. J. Pressure Vessel Piping, 1990, 43(1-3), 229-239.
54. Saina, T. and Chandra Kishen, J. M. Probabilistic assessment of fatigue crack growth in concrete. Int. J. Fatigue, 2008, 30(12), 2156-2164.
55. Mayer, M. A. and Booker, J. M. Eliciting and Analyzing Expert Judgment a Practical Guide, 1991 (Academic Press, Harcourt Brace Jovanovich Publishers, UK).
56. Cook, R. Experts in Uncertainty - Opinion and Subjective Probability in Science, 1991 (Oxford University Press, Oxford, UK).
57. Noortwijk, V. J. M., Dekker, R., Cook, R. M., and Mazzuchi, T. A. Expert judgment in maintenance optimization. IEEE Trans. Reliability, 1992, 41, 427-432. (Pubitemid 23555736)
58. Peres, F., Bouzaiene, L., Bocquet, J. C., Billy, F., Lannoy, A., and Haik, P. Anticipating aging failure using feedback data and expert judgment. Reliability Engng Syst. Safety, 2007, 92, 200-210. (Pubitemid 44740213)
59. Kaplan, S. Expert information versus expert opinions, another approach to problem of eliciting/combining/using expert knowledge in PRA. Reliability Engng Syst. Safety, 1992, 39, 61-72.
60. Øien, K. Introduction to Expert Opinion, SINTEF Report no. STF75 A94012, 1994 (SINTEF, Trondheim, Norway).
61. Øien, K. and Hokstad, P. Basic Principles for Expert Judgment, SINTEF Report No. STF75 A94022, 1994 (SINTEF, Trondheim, Norway).