Hydrodynamic characteristics of crossflow over MEMS-based pillars

Journal of Fluids Engineering, Transactions of the ASME

Volumn 133, Issue 8, 2011, Pages

  Koşar, Ali ^a   Schneider, Brandon ^b   Peles, Yoav ^b  

^a SABANCI UNIVERSITY   (Turkey)

^b RENSSELAER POLYTECHNIC INSTITUTE   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CROSS FLOWS; DEVICE GEOMETRIES; FLOW CONDITION; FRICTION FACTORS; GEOMETRICAL CONFIGURATIONS; HYDRODYNAMIC CHARACTERISTICS; HYDRODYNAMIC PROCESS; KEY PARAMETERS; MICRO FLUIDIC SYSTEM; PARAMETRIC STUDY; PIN-FINS; TUBE BUNDLE; WORKING CONDITIONS;

ASPECT RATIO; FINS (HEAT EXCHANGE); FRICTION; HYDRODYNAMICS; PARAMETRIC DEVICES; REYNOLDS NUMBER; TRIBOLOGY; WELDING ELECTRODES;

MICROELECTROMECHANICAL DEVICES;

EID: 80051911274     PISSN: 00982202     EISSN: 1528901X     Source Type: Journal    
DOI: 10.1115/1.4004366     Document Type: Article

References (41)

1. Peles, Y., Kuo, C. J., Koşar, A., Mishra, C., and Schneider, B., 2005, "Forced Convective Heat Transfer Across a Pin Fin Micro Heat Exchanger," Int. J. Heat Mass Transfer, 48(17), pp. 3615-3127.
2. Koşar, A., and Peles, Y., 2006, "Convective Flow of Refrigerant (R-123) across a Bank of Micro Pin Fins," Int. J. Heat Mass Transfer, 49 (17-18), pp. 3142-3155. (Pubitemid 43902821)
3. Koşar, A., and Peles, Y., 2006, "Thermalhydraulic Performance of MEMSbased Pin Fin Heat Sink," J. Heat Transfer, 128(2), pp. 121-131.
4. Qu, W., and Siu-Ho, A., (2009a), "Measurement and Prediction of Pressure Drop in a Two-phase Micro-pin-fin Heat Sink," Int. J. Heat Mass Transfer, 52 (21-22), pp. 5173-5184.
5. Qu, W., and Siu-Ho, A., 2009b, "Experimental Study of Saturated Flow Boiling Heat Transfer in an Array of Staggered Micro-pin-fins," Int. J. Heat Mass Transfer, 52(7-8), pp. 1853-1863.
6. Konishi, C. A., Qu, W., and Pfefferkorn, F. E., 2009, "Experimental Study of Water Liquid-Vapor Two-phase Pressure Drop Across an Array of Staggered Micro-Pin-Fins," J. Electron. Packaging, 131(2), p. 021010.
7. Qu, W., and Siu-Ho, A., (2008), "Liquid Single-Phase Flow in an Array of Micro-Pin-Fins. Part I. Heat Transfer Characteristics," J. Heat Transfer, 130(12), p. 122402.
8. Kandlikar, S. G., and Grande, W. J., 2004, "Evaluation of Single Phase Flow in Microchannel for High Heat Flux Chip Cooling-Thermodynamic Performance Enhancement and Fabrication Technology," Presented at the Second International Conference on Microchannels and Minichannels, ASME, New York, Paper ICMM2004-2321, pp. 67-76.
9. Schelling, P. K., Shi, Li, and Goodson, K. E., 2005, "Managing Heat for Electronics," Mater. Today, 8(6), pp. 30-35. (Pubitemid 40682632)
10. Lee, M., Wong, Y. Y., Wong, M., and Zohar, Y., 2003, "Size and Shape Effects on Two-Phase Flow Patterns in Microchannel Forced Convection Boiling," J. Micromech. Microeng., 13(1), pp. 155-164.
11. Kleiner, M. B., Kühn, S. A., and Harberger, K., 1995, "High Performance Forced Air Cooling Scheme Employing Microchannel Heat Exchangers," IEEE Trans. Comput. Packag., Manuf. Technol. A, 18, pp. 795-804.
12. Hitt, D. L., Zakrzwski, C. M., and Thomas, M. A., (2001), "MEMS-based Satellite Micropropulsion via Catalyzed Hydrogen Peroxide Decomposition, Smart Materials and Structures," 10, pp. 1163-1175.
13. London, A. P., Ayon, A. A., Epstein, A. H., Spearing, S. M., Harrison, T., Peles, Y., and Kerrebrock, J. L., 2001, "Microfabrication of a High Pressure Bipropellant Rocket Engine," Sensors Actuators A, 92(1-3), pp. 351-357. (Pubitemid 32697917)
14. Spadaccini, C. M., Zhang, X., Cadou, C. P., Miki, N., and Waitz, I. A., 2003, "Preliminary Development of a Hydrocarbon-fueled Catalytic Microcombustor," Sens. Actuators A, 103(1-2), pp 219-224.
15. Lee, D. H., and Kwon, S., 2002, "Heat Transfer and Quenching Analysis of Combustor in a Micro Combustion Vessel," J. Micromech. Microeng., 12(5), pp. 670-676.
16. Losey, M. W., Jackman, J., Firebaugh, S. L., Schmidt, M. A., and Jensen, K., 2002, "Design and Fabrication of Microfluidic Devices for Multiphase Mixing and Reaction," J. Microelectromech. Syst., 11(6), pp. 709-717.
17. Arana, L. R., Schaevitz, S. B., Franz, A. J., Schmidt, M. A., and Jensen, K., 2002, "Microfabricated Suspended-tube Chemical Reactor for Thermally Efficient Fuel Processing," J. Microelectromech. Syst., 12(5), pp. 600-612.
18. Epstein, A. H., and Senturia, S. D., 1997, "Macro Power for Micro Machinery," Science, 276(5316), p. 1211.
19. Cabodi, M., Turner, S. W. P., and Craighead, H. G., 2002, "Entropic Recoil Separation of Long DNA Molecules," Anal. Chem., 74, pp. 5169-5174. (Pubitemid 35215344)
20. Kaji, N., Tezuka, Y., Takamura, Y., Ueda, M., Nishimoto, T., Nakanishi, H., Horiike, Y., and Bada, Y., 2004, "Separation of Long DNA Molecules by Quartz Nanopillar Chips under a Direct Current Electric Field," Anal. Chem., 76, pp. 15-22. (Pubitemid 38040628)
21. Hattori, W., Someya, H., Baba, M., and Kawaura, H., 2004, "Size-based Continuous-flow Directional Control of DNA with a Nano-pillar Anisotropic Array," J. Chromatogr. A, 1051, pp. 141-146. (Pubitemid 39298836)
22. Panaro, N. J., Lou, X. J., Fortina, P., Kricka, L. J., and Wilding, P., 2005, "Micropillar Array Chip for Integrated White Blood Cell Isolation and PCR," Bimol. Eng., 21, pp. 157-162. (Pubitemid 40313414)
23. Taborek, J., 1983, Shell-and-Tube Heat Exchangers: Single phase Flow Handbook of Heat Exchanger Design (Hemisphere, New York), Chap. 3.3.
24. Short, Jr., B. E., Raad, P. E. and Price, D. C., 2002, "Performance of Pin Fin Cast Aluminum Coldwalls, Part. 1: Friction Factor Correlations," J. Thermophys. Heat Transfer, 16(3), pp. 389-396. (Pubitemid 34924274)
25. Gaddis, E. S., and Gnielski, V., 1985, "Pressure Drop in Horizontal Cross flow across Tube Bundles," Int. Chem. Eng., 25(1), pp. 1-15.
26. Gunter, A. Y., and Shaw, W. A., 1945, "A General Correlation of Friction Factors for Various Types of Surfaces in Cross Flow," Trans. Am. Soc. Mech. Eng., 67, pp. 643-660.
27. Sparrow, E. M., and Grannis, V. B., 1991, "Pressure Drop Characteristics of Heat Exchangers Consisting of Arrays of Diamond-Shaped Pin Fins," Int. J. Heat Mass Transfer, 34(3), pp. 589-600.
28. Short, Jr., B. E., Price, D. C., and Raad, P. E., 2004, "Design of Cast Pin Fin Coldwalls for Air-Cooled Electronic Systems," J. Electron. Packaging, 126, pp. 67-73.
29. Ruth, E. K., 1983, "Experiments on a Cross flow Heat Exchanger with Tubes of Lenticular Shape," J. Heat Transfer, 105, pp. 571-575. (Pubitemid 13608470)
30. Sparrow, E. M., and Kang, S. S., 1985, "Longitudinally-finned Cross Flow Tube Banks and their Heat Transfer and Pressure Drop Characteristics," Int. J. Heat Mass Transfer, 28(2), pp. 339-350. (Pubitemid 15479644)
31. Zukauskas, A. A., 1972, "Heat Transfer from Tubes in Cross Flow," in Advances in Heat Transfer (Academic Press, New York), Vol. 8, pp. 93-160.
32. Koşar, A., Mishra, C., and Peles, Y., 2005, "Laminar Flow Across a Bank of Low Aspect Ratio Micro Pin Fins," J. Fluids Eng., 127(3), pp. 419-430. (Pubitemid 41048151)
33. Siu-Ho, A., Qu, W., and Pfefferkorn, F. E., 2007, "Experimental Study of Pressure Drop and Heat Transfer in a Single-phase Micro-pin-Fin Heat Sink," J. Electron. Packaging, 129, pp. 479-487. (Pubitemid 351184014)
34. Prasher, R. S., Dirner, J., Chang, J-Y., Myers, A., Chau, D., He, D., and Prstic, S., 2007, "Nusselt Number and Friction Factor of Staggered Arrays of Low Aspect Ratio Micro Pin Fins under Cross Flow," J. Heat Transfer, 129, pp. 141-153. (Pubitemid 46738776)
35. Qu, W., and Siu-Ho, A., 2008, "Liquid Single-Phase Flow in an Array of Micro-pin-fins. Part II: Pressure Drop Characteristics," J. Heat Transfer, 130(12), p. 124501.
36. Moores, K. A., and Joshi, Y. K., 2003, "Effect of Tip Clearance on the Thermal and Hydrodynamic Performance of a Shrouded Pin Fin Array," J. Heat Transfer, 125, pp. 999-1006. (Pubitemid 38075173)
37. Kline, S., and McClintock, F. A., 1953, "Describing Uncertainties in Single-Sample Experiments," Mech. Eng., 75(1), pp. 3-8.
38. Umeda, S., and Yang, W. J., 1999, "Interaction of von Karman Vortices and Intersecting Main Streams in Staggered Tube Bundles," Exp. Fluids, 26, pp. 389-396.
39. Iwaki, C., Cheong, K. H., Monji, H., and Matsui, G., 2004, "PIV Measurement of the Vertical Cross-flow Structure over Tube Bundles," Exp. Fluids, 37, pp. 50-63.
40. Kwak, K. M., Torii, K., and Nishino, K., 2002, "Heat Transfer and Flow Characteristics of Fin-tube Bundles with and without Winglet-type Vortex Generators," Exp. Fluids, 33, pp. 696-702. (Pubitemid 35459531)
41. Chyu, M. K., Hsing, Y. C., and Natarajan, V., 1998, "Convective Heat Transfer of Cubic Fin Arrays in a Narrow Channel," J. Heat Transfer, 120, pp. 362-367.