Challenges in industrial applications of technical lignins

BioResources

Volumn 6, Issue 3, 2011, Pages 3547-3568

  Vishtal, Alexey ^a   Kraslawski, Andrzej ^a  

^a LAPPEENRANTA UNIVERSITY OF TECHNOLOGY   (Finland)

Author keywords

Biorefinery; Lignin; Purification; Reactivity; Recovery; Structure

Indexed keywords

BIOREFINERIES; LIGNOCELLULOSIC MATERIAL; LIGNOSULPHONATES; LIMITING FACTORS; ORGANOSOLV; PROCESSING METHOD; VALUE ADDED PRODUCTS;

INDUSTRIAL APPLICATIONS; REFINING; SUGARS;

LIGNIN;

LIGNINS; PURIFICATION; REACTIVITY; RECOVERY; REFINING; STRUCTURES; SUGARS;

EID: 80051558834     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: None     Document Type: Review

References (128)

1. Abächerli, A. (1998). "Method for precipitation of aromatic polymers from alkaline wastewater from pulping," Patent WO 9842912.
2. Abächerli, A., and Dopenberg, F. (1998). "Method for preparing alkaline solutions containing aromatic polymers," Int. patent. WO9842912.
3. Alonso, M. V., Oliet, M., Pérez, J. M., Rodríguez, and Echeverría, J. (2004). "Determination of curing kinetic parameters of lignin-phenol-formaldehyde resol by several dynamic differential scanning calorimetry methods," Thermochim. Acta 419 (1-2), 161-167.
4. Alonso, M. V., Oliet, M., Rodríguez, F., Astarloa, G., and Echeverría, J. M. (2004). "Use of a methylolated softwood ammonium lignosulfonate as partial substitute of phenolin resol resins manufacture," J. Appl. Polym. Sci. 94 (2), 643-650.
5. Ansari, A., and Pawlik, M. (2007). "Floatability of chalcopyrite and molybdenite in the presence of lignosulfonates. Part I. Adsorption studies," Miner. Eng. 20 (6), 600-608.
6. Areskogh, D., Li, J., Gellerstedt, G., and Henriksson, G. (2010). "Investigation of the molecular weight increase of commercial lignosulfonates by laccase catalysis," Biomacromolecules 11(4), 904-910.
7. Areskogh, D., and Henriksson, G. (2011). "Immobilisation of laccase for polymerization of commercial lignosulphonates," Process Biochemistry, Article in Press.
8. Areskogh, D., Li, J., Gellerstedt, G., and Henriksson, G. (2010). "Structural modification of commercial lignosulphonate through laccase catalysis and ozonolysis," Industrial Crops and Products 32(3), 458-466.
9. Argyropolous, D. S. (2008). "Use of lignocellulosics solvated in ionic liquids for production of biofuels," US Patent 2008/0190013 A1.
10. Argyropoulus, D. S., Sun, Y., and Paluš, E. (2002). "Isolation of kraft residual kraft lignin in high yield and purity," Journal of Pulp and Paper Science 28(2), 50-54.
11. Axelsson, E., Olsson, M. R., and Berntsson, T. (2006). "Increased capacity in kraft pulp mills: Lignin separation and reduced steam demand compared with recovery boiler upgrade," Nordic Pulp Paper Res. J. 21(4), 485-492.
12. Baklanova, O. N., Plaksin, G. V, Drozdov, V. A., Duplyakin, V. K., Chesnokov, N. V., and Kuznetsov, B. N. (2003). "Preparation of microporous sorbents from cedar nutshells and hydrolytic lignin," Carbon 41(9), 1793-1800.
13. Baurhoo, B., Ruiz-Feria, C. A., and Zhao, X. (2008). "Purified lignin: Nutritional and health impact on farm animals - A review," Animal Feed Science and Technology 144(3), 175-184.
14. Beigi, M. A. A. Teymouri, M., Eslami, M., and Farazmand, M. (1999). "Determination of tracesulphur in organic compounds by activated Raney nickel desulphurization method with nondispersive gas detection system," Analyst 124(5), 767-770.
15. Belgacem, M. N., Blayo, A., and Gandini, A. (2003). "Organosolv lignin as a filler in inks, varnishes, and paints," Industrial Crops and Products 18(2), 145-153.
16. Betancur, M., Bonelli, P. R., Velásquez, J. A., and Cukierman, A. L. (2009). "Potentiality of lignin from the kraft pulping process for removal of trace nickel from wastewater: Effect of demineralization," Bioresource Technology 100(3), 1130-1137.
17. Binder, J. B., Gray, M. J., White, J. F., Zhang, C. Z., and Holladay J. E. (2009). "Reactions of lignin model compounds in ionic liquids," Biomass and Bioenergy 33(9), 1122-1130.
18. Buranov, A. U. and Mazza, G. (2008). "Lignin in straw of herbaceous crops," ' Industrial Crops and Products 28(3), 237-259.
19. 2 or steam of kraft and hydrolytic lignins," J. Anal. Appl. Pyrolysis 82 (2), 264-271.
20. Carrott, S., and Carrott, R. (2007). "Lignin - from natural adsorbent to activated carbon: A review," Bioresource Technology 98(12), 2301-231.
21. Cazacu, G., Pascu, C., Profire, L., Kowarskik, A. L., Mihaies, M., and Vasile, C. (2004). "Lignin role in a complex polyolefin blend," Industrial Crops and Products 20(2), 261-273.
22. Chakar, F. S., and Ragauskas, A. J. (2004). "Review of current and future softwood kraft lignin process chemistry," Industrial Crops and Products 20(2), 131-141.
23. Chandra, R. P., Bura, R., Mabee, W. E., Berlin, A., Pan, X., and Saddler, J. N. (2007). "Substrate pretreatment: The key to effective enzymatic hydrolysis of lignocellulosics?" Adv. Biochem. Eng. Biotechnol. 108, 67-93.
24. Cheng, X. S., Liu, X. L., and Jin, Y. Q. (2007). "Study on EH lignin as a novel additive for polyurethane industry," Polyurethane Industry 22(6), 18-21.
25. Cherubini, F. (2010). "The biorefinery concept: Using biomass instead of oil for producing energy and chemicals," Energy Conversion and Management 51(7), 1412-1421.
26. Cook, P. M. and Hess, S. L. (1991). "Organosolv lignin-modified phenolic resins and method for their preparation," US Patent 5,010,156.
27. Jin, C. D., Li, S., Liu, L., Ye, J. W., and Du, C. D. (2011). "Research of process on making bamboo particle board by laccase-treated calcium lignosulfonate," Advanced Materials Research 179-180, 1031.
28. Dalimova, G. N. (2006). "Modification of hydrolyzed lignin in acidic and basic media," Chemistry of Natural Compounds 42(1), 88-91.
29. Demirbas, A. (2009). Biorefineries: For Biomass Upgrading Facilities, Springer, Berlin, ISBN: 1848827202.
30. Dence, C. W., and Reeve, D. W. (1996). Pulp Bleaching: Principles and Practice, TAPPI Press, Atlanta Georgia.
31. Dizhbite, T., Zakis, G., Kizima, A., Lazareva, E., Rossinskaya, G., Jurkjane, V., Telysheva, G., and Viesturs, U. (1999). "Lignin: A useful bioresource for the production of sorption-active materials," Bioresour. Technol. 67(3), 221-228.
32. Doherty, W., Mousaviouna, P., and Fellows C. (2011). "Value-adding to cellulosic ethanol: Lignin polymers," Industrial Crops and Products 33(2), 259-276.
33. Donaldson, L. A. (2001). "Lignification and lignin topochemistry - An ultrastructural view," Phytochemistry 57(6), 859-873.
34. Dong, D., and Fricke, A. L. (1995). "Intrinsic viscosity and the molecular weight of kraft lignin," Polymer 36(10), 2075-2078.
35. Dorado, J., Field, J. A., Almendros, G., and Sierra-Alvarez R. (2001). "Nitrogen-removal with protease as a method to improve the selective delignification of hemp stemwoodby the white-rot fungus Bjerkandera sp. strain BOS55," Appl. Microbiol. Biotechnol. 57(1-2), 205-211.
36. El Hage, R., Brosse, N., Chrusciel, L., Sanchez, C., Sannigrahi, P., and Ragauskas, A. (2009). "Characterization of milled wood lignin and ethanol organosolv lignin from Miscanthus," Polymer Degradation and Stability 94(10), 1632-1638.
37. El Mansouri, N.-E., and Salvadó, J. (2006). "Structural characterization of technical lignins for the production of adhesives: Application to lignosulphonate, kraft, sodaanthraquinone, organosolv and ethanol process lignins," Industrial Crops and Products 24(1), 8-16.
38. El-Mansouri, N.-E., and Salvadó, J. (2007). "Analytical methods for determining functional groups in various technical lignins," Industrial Crops and Products 26(2), 116-124.
39. Fagerholm-Byman, H., Mikkola, P., Rosenholm, J. B., Lindén, E., and Carlsson, R. (1999). "The infuence of lignosulphonate on the properties of single and mixed Si3N4 and ZrO2 suspensions," Journal of the European Ceramic Society 19(1), 41-48.
40. Fan, J., and Zhan, H. (2008). "Optimization of synthesis of spherical lignosulphonate resin and its structure characterization," Chinese Journal of Chemical Engineering 16(3), 407-410.
41. Faravelli, T., Frassoldati, A., Migliavacca, G., and Ranzi, E. (2010). "Detailed kinetic modeling of the thermal degradation of lignins," Biomass and Bioenergy 34(3), 290-301.
42. Fasching, M., Schröder, P., Wollboldt, R. P., Weber, H. K., and Sixta, H. (2007). "A new and facile method for isolation of lignin from wood based on complete wood dissolution," Holzforschung 62(1), 15-23.
43. Felby, C., Olesen, P. O., and Hansen, T. T. (1998). "Laccase catalysed bonding of wood fiber," In: Enzymes in Fiber Processing, ACS Symposium Series 687, Washington, DC, 88-98.
44. Fierro, V., Torne, V., Montane, D., and Salvadó, J. (2003). "Activated carbons prepared from kraft lignin by phosphoric acid impregnation," Carbon' 03. ISBN-84-607-8305-7.
45. FitzPatrick, M., Champagne, P., Cunningham, M. F., and Whitney, R. A. (2010). "A biorefinery processing perspective: Treatment of lignocellulosic materials for the production of value-added products," Bioresource Technology 101(23), 8915-8922.
46. García, A., Toledano, A., Serrano, L., Egüés, M., Gonzaléz, M., Marín, F., and Labidi, J. (2009). "Characterization of lignin obtained by selective precipitation," Separation and Purification Technology 68(2), 193-198.
47. Gellerstedt, G., and Henriksson, G. (2008). "Lignins: Major sources, structure and properties," In: Belgacem, M., and Gandini, A. (eds.), Monomers, Polymers and Composites from Renewable Resources, Elsevier, ISBN: 978-0-08-045316-3.
48. Ghatak, H. R. (2008). "Spectroscopic comparison of lignin separated by electrolysis and acid precipitation of wheat straw soda black liquor," Industrial Crops and Products 28(2), 206-212.
49. Gonçalves, A. R., and Benar, P. (2001). "Hydroxymethylation and oxidation of organosolv lignins and utilization of the products," Bioresource Technology 79(2), 103-111.
50. Gonzalez-Garcia, S., Moreira, T. M., Artal, G., Maldonado, L., and Feijooa, G. (2010). "Environmental impact assessment of non-wood based pulp production by soda athraquinone pulping process," Journal of Cleaner Production 18(2), 137-145.
51. Gosselink, R. J. A., Abächerli, A., Semke, H., Malherbe, R., Käuper, P., Nadif, A., and van Dam, J. E. G. (2004). "Analytical protocols for characterization of sulphur-free lignin," Industrial Crops and Products 19(3), 271-281.
52. Gosselink, R. J. A., de Jong, E., Guran, B., and Abächerli, A. (2004). "Co-ordination network for lignin-Standardisation, production and applications adapted to market requirements (EUROLIGNIN)," Industrial Crops and Products 20(2), 121-129.
53. Gosselink, R. J. A., de Jong, E., Abächerli, A., and Guran, B. (2005). "Activities and results of the thematic network EUROLIGNIN," In: Proceedings of the International Lignin Institute 7th Forum, Barcelona, 25-30.
54. Grierson, L. H., Knight, J. C., and Maharaj, R. (2005). "The role of calcium ions and lignosulphonate plasticiser in thehydration of cement," Cement and Concrete Research 35(4), 631-636.
55. Gullichsen, J., and Fogenholm, C.-J. (2000). "Chemical pulping," In: Gullichsen, J., and Paulapuro, H. (eds.), Papermaking Science and Technology, Book 6A. Chemical Pulping, Jyväskylä, Fapet Oy.
56. Hamelinck, C. N., van Hooijdonk, G., and Faaij, A. P. C. (2005). "Ethanol from lignocellulosic biomass: Techno-economic performance in short-, middle- and longterm," Biomass Bioenerg. 28(4), 384-410.
57. Harmita, H., Karthikeyan, K. G., and Pan, X.-J. (2010). "Copper and cadmium sorption onto kraft and organosolv lignins," Bioresource Technology 100(24), 6183-6191.
58. Hofrichter, M. (2002). "Review: Lignin conversion by manganese peroxidase (MnP)," Enzyme Microb. Technol. 30(4), 454-466.
59. Hol'kin, Y. (1989). Tehnologiya Gidroliznih Proizvodstv (The technology of wood' hydrolysis). Lesnaya Promishlennost'. ISBN-5-7120-0158-6. 496p. Book in Russian.
60. Holladay, J. E., Bozell, J. J., White, J. F., and Johnson, D. (2007). "Top value-added chemicals from biomass. Volume II- Results of screening for potential candidates from biorefinery lignin," A report. Available via: http://www1.eere.energy.gov/biomass/pdfs/pnnl-16983.pdf.
61. Iranmahboob, J., Nadim, F., and Monemi, S. (2002). "Optimizing acid-hydrolysis: A critical step for production of ethanol from mixed wood chips," Biomass Bioenergy 22(5), 401-404.
62. Jin, Y., Cheng, X., and Zhen, Z. (2010). "Preparation and characterization of phenol- formaldehyde adhesives modified with enzymatic hydrolysis lignin," Bioresource Technology 101(6), 2046-2048.
63. Jöhnson, D. K., Bozell, J., Holladay, J. E., and White, J. F. (2005). "Use of lignin in the biorefinery," In: Proceedings of the International Lignin Institute 7th Forum, Barcelona, 31-34.
64. Jönsson, A.-S., Nordin, A.-K., and Wallberg, O. (2008). "Concentration and purification of lignin in hardwood kraftpulping liquor by ultrafiltration and nanofiltration," Chemical Engineering Research and Design 86(11), 1271-1280.
65. Jönsson, A.-S., and Wallberg, O. (2009). "Cost estimates of kraft lignin recovery by ultrafiltration," Desalination 237(1-3), 254-267.
66. Kadla, J. F., Kubo, S., Venditti, R. A., Gilbert, R. D., Compere, A. L., and Griffith, W. (2002). "Lignin-based carbon fibers for composite fiber applications," Carbon 40(15), 2913-2920.
67. Kubo, S., Uraki, Y., and Sano, Y. (1998). "Preparation of carbon fibers from softwood lignin by atmospheric acetic acid pulping," Carbon 36(7-8), 1119-1124.
68. Lebo, S. E., Gargulak, J. D., and Timothy, J. M. (2001). "Lignin," In: Kirk-Othmer Encyclopedia of Chemical Technology (4th ed.), John Wiley and Sons, New York.
69. Li, J., and Gellerstedt, G. (2008). "Improved lignin properties and reactivity by modifications in the autohydrolysis process of aspen wood," Industrial Crops and Products 27(2), 175-181.
70. Li, X., Weng, J.-K., and Chapple, C. (2008). "Improvement of biomass through lignin modification," The Plant Journal 64(4), 569-581.
71. Lora, J. (2008). "Industrial commercial lignins: Sources, properties and applications," In: Belgacem, M., and Gandini, A. (eds.), Monomers, Polymers and Composites from Renewable Resources, Elsevier, ISBN: 978-0-08-045316-3.
72. Lora, J. H., Creamer, A. W., Wu, C. F., and Goyal, G. C. (1993). "Industrial scale production of organosolv lignins; Characteristics and applications," In: Kennedy, J. F. (ed.), Cellulosics: Chemical, Biochemical and Material Aspects, Ellis Horwood Ltd, 251-256.
73. Lora, J. H., and Glasser, W. G. (2002). "Recent industrial applications of lignin: A sustainable alternative to nonrenewable materials," Journal of Polymers and the Environment 10(1-2), 39-48.
74. Loutfi, H., Blackwell, B., and Uloth, V. (1991). "Lignin recovery from kraft black liquor: Preliminary process design," Tappi J. 74(1), 203-210.
75. MacFarlane, A. L., Prestidge, R., Farid, M. M., and Chen, J. J. J. (2009). "Dissolved air flotation: A novel approach to recovery of organosolv lignin," Chemical Engineering Journal 148(1), 15-19.
76. Mai, C., Milstein, O., and Hüttermann, A. (2000). "Chemoenzymatical grafting of acrylamide onto lignin," Journal of Biotechnology 79(2), 173-183.
77. Mandavgane, S., Paradkar, G. D., Varu, J., Pamar, R., and Subramanian, D. (2007). "Desilication of agro based black liquor and green liquor using jet loop reactor," Indian Journal of Chemical Technology 14(6), 606-610.
78. Matsushita, Y., Inomata, T., Hasegawa, T., and Fukushima, K. (2009). "Solubilization and functionalization of sulphuric acid lignin generated during bioethanol production from woody biomass," Bioresource Technology 100(2), 1024-1026.
79. Matsushita, Y., Imai, M., Iwatsuki, A., and Fukushima, K. (2008). "The relationship between surface tension and the industrial performance of water-soluble polymers prepared from acid hydrolysis lignin, a saccharification by-product from woody materials," Bioresour. Technol. 99(8), 3024-3028.
80. Meister, J. J. (2002). "Modification of lignin," Journal of Macromolecular Science-Polymer Reviews 42(2), 235-289.
81. Mohan, D., Pittman, C. U., and Steele, P. H. (2006). "Single, binary and multicomponent adsorption of copper and cadmium from aqueous solutions on kraft lignin-a biosorbent," Journal of Colloid and Interface Science 297(2), 489-504.
82. Mousavioun, P., and Doherty, W. O. S. (2010). "Chemical and thermal properties of fractionated bagasse soda lignin," Industrial Crops and Products 31(1), 52-58.
83. Muhammad, N., Man, Z., and Khalil, M. A. B. (2011). "Ionic liquid - a future solvent for the enhanced uses of wood biomass," Eur. J. Wood. Prod., Article in press.
84. Mäki-Arvela, P., Anugwoma, I., Virtanen, P., Sjöholm, R., and Mikkola, J. P. (2010). "Dissolution of lignocellulosic materials and its constituents using ionic liquids. A review," Industrial Crops and Products 32(3), 175-201.
85. Mänttäri, M., and Nyström, M. (2009). "Utilization of membrane processes in treating various effluents generated in pulp and paper industry," 981-1007, In: Pabby, A. K., Rizvi, S. S. H., and Sastre, A. M. (2009). Handbook of Membrane Separations: Chemical, pharmaceutical, Food and Biotechnological Applications, CRC Press New York.
86. Mäntyniemi, J. (2010). "Novel solutions for pulp mill energy intensification," Results Pulp and Paper 3, 46-49.
87. 13C NMR-spectra and molecular weight distributions," Holzforschung 40, 51-60.
88. Nadif, A., Hunkeler, D., and Käuper, P. (2002). "Sulfur-free lignins from alkaline pulping tested in mortar for use as mortar additives," Bioresource Technology 84(1), 49-55.
89. Nakagame, S., Chandra, R. P., Kadla, J. F., and Saddler, J. N. (2011). "The isolation, characterization and effect of lignin isolated from steam pretreated Douglas-fir on the enzymatic hydrolysis of cellulose," Bioresource Technology 102(2), 4507-4517.
90. Narayan, R., and Ho, N. (1988). "Objectives of coal bioprocessing and approaches," ACS Division of Fuel Chemistry meeting Fall 1988 (LOS ANGELES) 33(4). available via: http://www.anl.gov/PCS/acsfuel/preprint%20archive/Files/33_4_LOS%20ANGELES_09-88_0487.pdf.
91. Nepenin, N. N., and Nepenin, Y. N. (1994). Pulping Technology: Cleaning, Drying and Bleaching of Pulp. Other Pulping Methods, Moscow "Ekologia". ISBN 5-7120-0464-x.
92. Niemelä, K. (1990). "Low-molecular-weight organic compounds in birch kraft black liquor," Ph.D. Thesis, Helsinki University of Technology.
93. Olivier-Bourbigou, H., Magna, L., and Morvan, D. (2011). "Ionic liquids and catalysis: Recent progress from knowledge to applications," Industrial Crops and Products 33(1-2), 259-276.
94. Ouyang, X., Lin, Z., Deng, Y., Yang, D., and Qiu, X. (2010). "Oxidative degradation of soda lignin assisted by microwave irradiation," Chinese Journal of Chemical Engineering 18(4), 695-702.
95. Palmqvist, L., Lyckfeldta, O., Carlström, E., Davous, P., Kauppi, A., and Holmberg, K. (2006). "Dispersion mechanisms in aqueous alumina suspensions at high solids loadings," Colloids and Surfaces A: Physicochemical and Engineering Aspects 274(1-3), 100-109.
96. Pan, X., Kadla, J. F., Ehara, K., Gilkes, N., and Saddler, J. N. (2006). "Organosolv ethanol lignin from hybrid poplar as a radical scavenger: Relationship between ligninstructure, extraction conditions, and antioxidant activity," J. Agric. Food Chem. 54(16), 5806-5813.
97. Park, Y., Doherty, W. O. S., and Halleya, P. J. (2008). "Developing lignin-based resin coatings and composites," Industrial Crops and Products 27(2), 163-167.
98. Ramírez, R., González, V., Crespo, M., Meier, D., Faix, O., and Zúñiga, V. (1997). "Ammoxidized kraft lignin as a slow-release fertilizer tested on Sorghum vulgare," Bioresource Technology 61(1), 43-46.
99. Rastogi, S., and Dwivedi, U. N. (2008). "Manipulation of lignin in plants with special reference to O-methyltransferase," Plant Science 174(3), 264-277.
100. Restolho, J. A., Prates, A., Norberta de Pinho, M., and Dina Alfonso, M. (2009). "Sugars and lignosulphonates recovery from eucalyptus spent sulphite liquor by membrane process," Biomass and Bionergy 33(11), 1558-1566.
101. Rodriguez, A., Sancheza, R., Requejoa, A., and Ferrera, A. (2010). "Feasibility of rice straw as a raw material for the production of soda cellulose pulp," Journal of Cleaner Production 18(10-11), 1084-1091.
102. Saake, B., and Lehnen, R. (2007). "Lignin," In: Ullmanns's Encyclopedia of Industrial Chemistry.
103. Sazanov, Y. N, Kulokova, E. M, Fedorova, G. N., Popova, E. N., Litvinova, L. S., Kever, E. E., Mokeev, M. V., Sumerskii, I. V, Novoselova, A. V., and Gribanov, A. V. (2009). "Potential activity of hydrolytic lignin in copolymerization reactions," Russian Journal of Applied Chemistry 82(9), 1592-1599.
104. Sena-Martins, G., Almeida-Vara, E., and Duarte, J. C. (2008). "Eco-friendly new products from enzymatically modified industrial lignins," Industrial Crops and Products 27(2), 189-195.
105. Shulga, G., Rekner, F., and Varslavan, J. (2001). "SW-soil and water: Lignin-based interpolymer complexes as a novel adhesive for protection against erosion of sandy soil," Journal of Agricultural Engineering Research 78(3), 309-316.
106. Shulga, G., Soloddovniks, P., Shakels, V., and Anisckevicha, O. (2005). "New semiinterpenetrating polymer networks incorporating soluble lignin," Proceedings of the 7th ILI Forum-Barcelona, International Lignin Institute, Lausanne, 159-162.
107. Sjöström, E. (1982). Wood Chemistry: Fundamentals and Applications, Academic Press, ISBN 0-12-647480-x. 223p.
108. Sun, R. C., Lawther, M., and Banks, W. B. (1998). "Isolation and characterization of organosolv lignins from wheat straw," Wood and Fiber Science 30(1), 56-63.
109. Sun, N., Rahman, M., Qin, Y., Maxim, M. L., Rodriguez, R. H., and Rogers, R. D., (2009). "Complete dissolution and partial delignification of wood in the ionic liquid 1-ethyl-3-methylimidazolium acetate," Green Chemistry 11(5), 646-655.
110. Svensson, S. (2008). "Minimizing sulphur content in kraft lignin," Degree Project. Mälardalen University. 35p. available via: http://mdh.divaportal.org/smash/get/diva2:1676/FULLTEXT01.
111. Tan, S. S. Y., MacFarlane, D. R., Upfal, J., Edye, L. A., Doherty, W. O. S., Patti, A. F., Pringle, J. M., and Scott, J. L. (2009). "Extraction of lignin from lignocellulose at atmospheric pressure using alkylbenzenesulfonate ionic liquid," Green Chemistry 11(3), 339-345.
112. Tejado, A., Peňa, C., Labidi, J., Echevérria, J. M., and Mondragon, I. (2007). "Physicochemical characterization of lignins from different sources for use in phenol- formaldehyde resin synthesis," Bioresource Technology 98(8), 1655-1663.
113. Toledano, A., García, A., Mondragon, I., and Labidi, J. (2010a). "Lignin separation and fractionation by ultrafiltration," Separation and Purification Technology 71(1), 38-43.
114. Toledano A., Serrano L., Garcia A., Mondragon I., and Labidi J. (2010b). "Comparative study of lignin fractionation by ultrafiltration and selective precipitation," Chemical Engineering Journal 157(1), 93-99.
115. Turunen, M., Alvila, L., Pakkanen, T. T., and Rainio, J. (2003). "Modification of phenol- formaldehyde resol resins by lignin, starch and urea," J. Appl. Polym. Sci. 88(2), 582-588.
116. Ungureanu, E., Ungureanu, O., Capraru, A.-M., and Popa, V. I. (2009). "Chemical modification and characterization of straw lignin," Cellulose. Chem. Technol. 43(7-8), 263-269.
117. van Spronsen, J., Tavares Cardoso, M., Witkamp, G.-J., de Jong, W., and Kroon, M. C. (2011). "Separation and recovery of the constituents from lignocellulosic biomass by using ionic liquids and acetic acid as co-solvents for mild hydrolysis," Chemical Engineering and Processing: Process Intensification 50(2), 196-199.
118. Veverka, P. J., and Nichols, K. M. (1992). "On the source and chemical form of nitrogen in kraft black liquor," IPST Technical Paper Series 449, 10 pp.
119. Wang, J. P., Chen, H.-S., Shi, R., Li, Q., Sun, Y.-H., Sederoff, R., and Chiang, V. (2010). "Unlocking biofuel industry through comprehending lignin biosynthesis," Poster, Available via: http://www.ncsu.edu/grad/research/docs/wang-poster-2010.pdf.
120. Wang, M., Leitch, M., and Xu, C. (2009). "Synthesis of phenol-formaldehyde resol resins using organosolv pine lignins," European Polymer Journal 45(12), 3380-3388.
121. Weng, J.-K., Li, X., Bonawitz, N., and Chapple, C. (2008). "Emerging strategies of lignin engineering and degradation for cellulosic biofuel production," Current Opinion in Biotechnology 19(2), 166-172.
122. Wormeyer, K., Ingram, T., Saake, B., Brunner, G., and Smirnova, I. (2011). "Comparison of different pretreatment methods for lignocellulosic materials. Part II: Influence of pretreatment on the properties of rye straw lignin," Bioresource Technology 102(8), 4157-4164.
123. Xu, F., Sun, J.-X., Sun, R. C., Fowler, P., and Baird, M. S. (2006). "Comparative study of organosolv lignins from wheat straw," Industrial Crops and Products 23(2), 180-193.
124. Yuan, Z., Cheng, S., Leitch, M., and Xu, C. (2010). "Hydrolytic degradation of alkaline lignin in hot-compressed water and ethanol," Bioresource Technology 101(23), 9308-9313.
125. Zhang, J., Deng, H., Lin, L., Sun, Y., Pan, C., and Liu, S. (2010). "Isolation and characterization of wheat straw lignin with a formic acid process," Bioresource Technology 101(7), 2311-2316.
126. Zhang, L.-M. and Yin, D.-Y. (2002). "Preparation of a new lignosulphonate-based thinner: Introduction of ferrous ions," Colloids Surf. A: Physicochemical and Engineering Aspects 210(1), 13-21.
127. Zhang, Y. H. (2008). "Reviving the carbohydrate economy via multi-product lignocelluloses biorefineries," Journal of Industrial Microbiology and Biotechnology 35(3), 367-375.
128. Zoumpoulakis, L., and Simitzis, J. (2001). "Ion-exchange resins from PF resin modified lignin," Polym. Int. 50 (3), 277-283.