Thermal sprayed bioceramics coatings for metallic implants

Ceramic Transactions

Volumn 228, Issue , 2011, Pages 159-171

  Sarao, T P S ^a   Singh, H ^b,c   Chhibbe, R ^d  

^a Swami Vivekanand Institute of Engineering and Technology   (India)

^b INDIAN INSTITUTE OF TECHNOLOGY ROPAR   (India)

^c Yadavindra College of Engineering   (India)

^d THAPAR UNIVERSITY   (India)

Author keywords

[No Author keywords available]

Indexed keywords

BIOCERAMICS; CALCIUM PHOSPHATE; FUELS; HYDROXYAPATITE; MEDICAL APPLICATIONS; METALS; PHOSPHATE COATINGS; PLASMA SPRAYING;

BIOMEDICAL APPLICATIONS; HA COATING; HIGH VELOCITY OXY-FUEL SPRAYS; HYDROXYAPATITE COATING; METALLIC IMPLANTS; THERMAL SPRAY TECHNIQUES; THERMALSPRAY;

SPRAYED COATINGS;

EID: 79961008260     PISSN: 10421122     EISSN: None     Source Type: Book Series    
DOI: 10.1002/9781118144565.ch16     Document Type: Conference Paper

References (75)

1. A. Balamurugan, S. Kanan, and S. Rajeswari, Bioactive Sol-Gel Hydroxyapatite Surface for Biomedical Applications - In Vitro Study, Trends Biomater. Artif. Organs., Vol 16 (No.1), 2002, p 18-20
2. T.G. Nieh, A.F. Jankowski and J. Koike, Processing and Characterization of Hydroxyapatite Coatings on Titanium Produced by Magnetron Sputtering, J. Mater. Res., Vol 16 (No. 11), 2001, p 3238-3245
3. S. Sobieszczyk, Surface Modifications of Ti and its Alloys, Advance Mater. Sci., Vol 10, (No. 1), 2010, p 29-42
4. D. Krupa, J. Baszkiewicz, J.A. Kozubowski, A. Barcz, J.W. Sobczak, A. Bilinski, M. Lewandowska-Szumiel and B. Rajchel, Effect of Dual Ion Implantation of Calcium and Phosphorus on the Properties of Titanium, Biomaterials, Vol 26 (No. 16), 2005, p 2847-2856
5. J.A. Darr, Z.X. Guo, V. Raman, M. Bououdina and I.U. Rehman, Metal Organic Chemical Vapour Deposition (MOCVD) of Bone Mineral like Carbonated Hydroxyapatite Coatings, Chemical Communications, Vol 6, 2004, p 696-697
6. V. Nelea, C. Ristoscu, C. Chiritescu, C. Ghica, I.N. Mihailescu, H. Pelletier, P. Mille, and A. Cornet, Pulsed Laser Deposition of Hydroxyapatite Thin Films on Ti-5Al-2.5Fe Substrates with and without Buffer Layers, Appl. Surf. Sci., Vol 168, 2000, p 127-131
7. S. Grigorescu, C. Ristoscu, G. Socol, E. Axente, F. Feugeas and I.N. Mihailescu, Hydroxyapatite Pulsed Laser Deposited Thin Films Behaviour when Submitted to Biological Simulated Tests, Romanian Reports in Physics, Vol 57 (No. 4), 2005, p 1003-1010
8. L.Z. Shi, C.Z. Chen, H.J. Yu and S.J. Zhang, Application of Magnetron Sputtering for Producing Bioactive Ceramic Coatings on Implant Materials, Bull. Mater. Sci., Vol 31 (No. 6), 2008, p 877-884
9. L.S. Leea, D.H. Kimb, H.E. Kimb, Y.C. Jung, and C.H. Han, Biological Performance of Calcium Phosphate Films Formed on Commercially Pure Ti by Electron-Beam Evaporation, Biomaterials, Vol 23, 2002, p 609-615
10. D.A. Givan, Precious Metals in Dentistry, Dent. Clin. North Am., Vol 51, 2007, p 591-601
11. M. Niinomi, Recent Research and Development in Titanium Alloys for Biomedical Applications and Healthcare Goods, Sci. Technol. Adv. Mater., Vol 4, 2003, p 445-454
12. J.W. Nicholson, The Chemistry of Medical and Dental Materials, Royal Society of Chemistry, Cambridge, UK, 2002
13. S. Fantassi, M. Vardelle, P. Fauchais and C. Moreau, Investigation of the Splat Formation Versus Different Particulate Temperatures and Velocities Prior to Impact, Proceeding of 13th International Thermal Spray Conf., Florida, 1992
14. P. Fauchais, A. Vardelle, M. Vardelle, A. Denoirjean, B Pateyron, and M. El Ganaoui, Formation And Layering of Alumina Splats: Thermal History of Coating Formation, resulting Stresses and Coating Microstructure, Proc. of International Thermal Spray Conf., Singapore, 2001, p 865-873
15. E. Turunen, Diagnostic tools for HVOF process optimization, Dissertation for the Degree of Doctor of Science in Technology, VTT Publications, 2005
16. L. Pawlowski, The Science and Engineering of Tthermal Spray Coatings, John Wiley & Sons, New York, USA, 1995
17. J. Legoux, F. Chellat, R. Lima, B. Marple, M. Bureau, H. Shen, and G. Candeliere, Development of Osteoblast Colonies on New Bioactive Coatings, J. Thermal Spray Technol, Vol 15 (No. 4), 2006, p 628-633
18. F. Ye, A. Ohmori, T. Tsumura, K. Nakata, and C.J. Li, Microstructural Analysis and Photocatalytic Activity of Plasma-Sprayed Titania-Hydroxyapatite Coatings, J. Thermal Spray Technol, Vol 16 (No.5-6), 2007, p 776-782
19. 2 Intermediate Layer, J. Thermal Spray Technol, Vol 12 (No.2), 2003, p 199-207
20. J. Fernnandez, M. Gaona, and J.M. Guilemany, Effect of Heat Treatments on HVOF Hydroxyapatite Coatings, J. Thermal Spray Technol., Vol 16 (No.2), 2007, p 220-228
21. W.L. Jaffe, and D.F. Scott, Current Concepts Review, Total Hip Arthroplasty with Hydroxyapatite-Coated Prostheses, J. Bone Joint Surg., Vol 78, 1996, p 1918-1934
22. P. Ducheyne, J. Beight, J. Cuckler, B. Evans, and S. Radin, Effect of Calcium Phosphate Coating Characteristics on Early Post-Operative Bone Tissue Ingrowth, Biomaterials, Vol 11 (No.8),1990, p 531-540
23. K.A. Gross, C.C. Berndt, and H. Herman, Amorphous Phase Formation in Plasma-Sprayed Hydroxyapatite Coatings, J. Biomed. Mater. Res., Vol 39 (No.3), 1998, p 407-414
24. K.A. Khor, H. Li, and P. Cheang, Characterization of the Bone-Like Apatite Precipitated on High Velocity Oxy-Fuel (HVOF) Sprayed Calcium Phosphate Deposits, Biomaterials, Vol 24 (No.5), 2003, p 769-775
25. R.B. Heimann, and T.A. Vu, Low-Pressure Plasma-Sprayed (LPPS) Bioceramic Coatings with Improved Adhesion Strength and Resorption Resistance, J. Thermal Spray Technol., Vol 6 (No.2), 1997, p 145-149
26. K.A. Khor, P. Cheang, and Y. Wang, Plasma Spraying of Combustion Flame Spheroidized Hydroxyapatite (HA) Powders, J. Thermal Spray Technol., Vol 7 (No.2), 1998, p 254-260
27. K.S. Raja, M. Misra, and K. Paramguru, Deposition of Calcium Phosphate Coating on Nanotubular Anodized Titanium, Materials Letters, Vol 59 (No.17), 2005, p 2137-2141
28. Z. Mohammadi, A.A. Ziaei-Moayyed, and A. Sheikh-Mehdi Mesgar, Adhesive and Cohesive Properties by Indentation Method of Plasma-Sprayed Hydroxyapatite Coatings, Appl. Surf. Sci., Vol 253 (No.11), 2007, p 4960-4965
29. T.J. Levingstone, J. Stokes, and L. Looney, Investigation of the Influence of Plasma Spray Process Parameters on Hydroxyapatite Coatings, Proc. Bioengineering Confer., Ireland, January 27-28, 2006
30. H.C. Gledhill, I.G. Turner, and C. Doyle, Direct Morphological Comparison of Vacuum Plasma Sprayed and Detonation Gun Sprayed Hydroxyapatite Coatings for Orthopaedic Applications, Biomaterials, Vol 20, 1999, p 315-322
31. H.C. Gledhill, I.G. Turner, and C. Doyle, In Vitro Fatigue Behaviour of Vacuum Plasma and Detonation Gun Sprayed Hydroxyapatite Coatings, Biomaterials, Vol 22, 2001, p 1233-1240
32. M.F. Morks, and A. Kobayashi, Effect of Gun Current on the Microstructure and Crystallinity of Plasma Sprayed Hydroxyapatite Coatings, Appl. Surf. Sci., Vol 253 (No.17), 2007, p 7136-7142
33. R. Mevrel, Cyclic Oxidation of High-Temperature Alloys, Mater. Sci. Technol., Vol 3, 1987, p 531
34. Y.C. Yang, and E. Chang, Measurements of Residual Stresses in Plasma-Sprayed Hydroxyapatite Coatings on Titanium Alloy, Surf. and Coat. Technol., Vol 190 (No.1), 2005, p 122-131
35. C. Renghini, E. Girardin, A.S. Fomin, A. Manescu, A. Sabbioni, S.M. Barinov, V.S. Komlev, G. Albertini, and F. Fiori, Plasma Sprayed Hydroxyapatite Coatings from Nanostructured Granules, Mater. Sci. Engg., Vol 152 (No. 1-3), 2008, p 86-90
36. 2 Coatings for Biomedical Application, J. Mech. Behav. Biomed. Mater., Vol 1 (No.1), 2008, p 105-111
37. M. Long, and H.T. Rack, Titanium Alloys in Total Joint Replacement - A Materials Science Perspective, Biomaterials, Vol 19, 1998, p 1621-1639
38. Y.C. Yang, and E. Chang, Influence of Residual Stress on Bonding Strength and Fracture of Plasma-Sprayed Hydroxyapatite Coatings on Ti6A14V Substrate, Biomaterials, Vol 22 (No.13), 2001, p 1827-1836
39. S. Yang, H.C. Man, W. Xing, and X. Zheng, Adhesion Strength of Plasma-Sprayed Hydroxyapatite Coatings on Laser Gas-Nitrided Pure Titanium, Surf. Coat. Technol., Vol 203 (No.20-21), 2009, p 3116-3122
40. J.Y. Chen, W.D. Tong, and Y. Cao, J.M. Feng, and X.D. Zhang, Effect of Atmosphere on Phase Transformation in Plasma-Sprayed Hydroxyapatite Coatings during Heat Treatment, J. Biomed. Mater. Res., Vol 34, 1997, p 15-20
41. C.W. Yang, T.S. Lui, and L.H. Chen, Hydrothermal Crystallization Effect on the Improvement of Erosion Resistance and Reliability of Plasma-Sprayed Hydroxyapatite Coatings, Thin solid films, Vol 517 (No.17), 2009, p 5380-5385
42. Y.P. Lu, S.T. Li, R.F. Zhu, and M.S. Li, Further Studies on the Effect of Stand-Off Distance on Characteristics of Plasma Sprayed Hydroxyapatite Coating, Surf. and Coat. Technol., Vol 157, 2002, p 221-225
43. X. Zheng, M. Huang, and C. Ding, Bond strength of plasma-sprayed hydroxyapatite/Ti composite coatings, Biomaterials, Vol 21, 2000, p 841-849
44. C.W. Yang, T.S. Lui, T.M. Lee, and E. Chang, Effect of Hydrothermal Treatment on Microstructural Feature and Bonding Strength of Plasma Sprayed Hydroxyapatite on Ti6A14V, Mater. Trans., Vol 45 (No.9), 2004, p 2922-2929
45. R.L. Salsbury, Quality Control of Hydroxyapatite Coatings: Purity and Crystallinity Determinations, Proc. National Thermal Spray Conf., ASM International, 1991, p 471
46. C.W. Yang, T.M. Lee, T.S. Lui, and E. Chang, Effect of Post Vacuum Heating on the Microstructural Feature and Bonding Strength of Plasma-Sprayed Hydroxyapatite Coatings, Mater. Sci. and Engg., 2006, Vol 26 (No.8), p 1395-1400
47. Y.C. Yang, E. Chang, B.H. Hwang, and S.Y. Lee, Biaxial Residual Stress States of Plasma-Sprayed Hydroxyapatite Coatings on Titanium Alloy Substrate, Biomaterials, Vol 21 (No. 13), 2000, p 1327-1337
48. J.A Haynes, E.D. Rigney, and G.M. Janowski, Effects of Cyclic Bending and Physiological Solution on Plasma Sprayed Coatings of Varying Crystallinity, J. Biomed. Mater. Res., Vol 48 (No. 4), 1999, p 403-410
49. R. Hermann, and H. Lehmann, Recently Patented Work on Thermally Sprayed Coatings for Protection against Wear and Corrosion of Engineered Structures, Recent Patents on Mater. Sci., Vol 1, 2008, p 41-55
50. J. R. Davis, Handbook of Thermal Spray Technology, ASM Handbook Series, 2004
51. S. Kuroda, J. Kawakita, M. Watanabe, and H. Katanoda, Warm Spraying- A Novel Coating Process Based on High-Velocity Impact of Solid Particles, Sci. Tech. Adv. Mater., Vol 9, 2008, p 1-17
52. K.A. Khor, H. Li, and P. Cheang, Significance of Melt-Fraction in HVOF Sprayed Hydroxyaptite Particles, Splats and Coatings, Biomaterials, Vol 25, 2004, p 1177-1186
53. T. Kinos, Proc. Ntpc, 1994, p 357
54. K.A. Khor, and N.L. Leh, Proc. Ntsc, 1993, p 613
55. J. Cizek, K.A. Khor, and Z. Prochazka, Influence of Spraying Conditions on Thermal and Velocity Properties of Plasma Sprayed Hydroxyapatite, J. Mater. Sci. Engg., Vol 27 (No.2), 2007, p340-344
56. M. Li, and P.D. Christofides, Modelling and Control of High Velocity Oxygen Fuel (HVOF) Thermal Spray: A Tutorial Review, J. Thermal Spray Technol., Vol 18 (No. 5-6), 2009, p 753-768
57. J.G.C. Wolke, J.M.A. de Blieck-Hogervorst, T.G. Kraak, W. Herlaar, and K. de Groot, The Characterization of Hydroxyapatite Coatings Sprayed with VPS, APS and DJ Systems, Proceedings 4th. National Thermal Spray Confer., Pittsburgh, USA, 1991, p 481-490
58. H. Li, K.A. Khor, and P. Cheang, Adhesive and Bending Failure of Thermal Sprayed Hydroxyapatite Coatings: Effect of Nanostructures at Interface and Crack Propagation Phenomenon during Bending, Engg. Fract. Mech., Vol 74, 2007, p1894-1903
59. R.S. Lima, K.A. Khor, H. Li, P. Cheang, and B.R. Marple, HVOF Spraying of Nanostructured Hydroxyapatite for Biomedical Applications, Mater. Sci. Engg., Vol 396 (No.1-2), 2005, p 181-187
60. H. Li, and K.A. Khor, Characteristics of the Nanostructures in Thermal Sprayed Hydroxyapatite Coatings and their Influence on Coating Properties, Surf. Coat. Technol., Vol 201 (No. 6), 2006, p 2147-2154
61. H. Li, B.S. Ng, K.A. Khor, P. Cheang, and T.W. Clyne, Raman Spectroscopy Determination of Phases within Thermal Sprayed Hydroxyapatite Splats and Subsequent in Vitro Dissolution Examination, Acta Materialia, Vol 52 (No. 2), 2004, p 445-453
62. K.A. Khor, H. Li, and P. Cheang, Processing-Microstructure-Property Relations in HVOF Sprayed Calcium Phosphate based Bioceramic Coatings, Biomaterials, Vol 24 (No. 13), 2003, p 2233-2243
63. M. Gaona, R.S. Lima, and B.R.Marple, Nanostructured Titania/ Hydroxyapatite Composite Coatings Deposited by High Velocity Oxy-Fuel (HVOF) Spraying, Mater. Sci. and Engg., Vol 458, 2007, p 141-149
64. H. Li, K.A. Khor, and P. Cheang, Titanium Dioxide Reinforced Hydroxyapatite Coatings Deposited by High Velocity Oxy-Fuel (HVOF) Spray, Biomaterials, Vol 23, 2002, p 85-91
65. H. Li, K.A. Khor, and P. Cheang, Properties of Heat-Treated Calcium Phosphate Coatings Deposited by High-Velocity Oxy-Fuel (HVOF) Spray, Biomaterials, Vol 23 (No.10), 2002, p 2105-2112
66. H.C. Gledhill, I.G. Turner, and C. Doyle, In Vitro Dissolution Behaviour of Two Morphologically Different Thermally Sprayed Hydroxyapatite Coatings, Biomaterials, Vol 22, 2001, p 695-700
67. N. Sanpo, M.L. Tan, P. Cheang, and K.A. Khor, Antibacterial Property of Cold-Sprayed HA-Ag/PEEK Coating, J. Thermal Spray Technol., Vol 18 (No. 1), 2009, p 10-15
68. R. Ghelichi, and M Guagliano, Coating by the Cold Spray Process: A State of the Art, Frattura ed Integrità Strutturale, Vol 8, 2009, p 30-44
69. R.G. Maev, H. Weinert, E. Maeva, and V. Leshchynsky, Low Pressure Gas Dynamic Spray of Hydroxyapatite Composite Coatings, Proc International Scientific and Technical Confer., Design and Technology of Draw Pieces and Die Stampings, Poznań-Wa̧sowo, 2008, p 111-120
70. A. Choudhuri, P.S. Mohanty, and J. Karthikeyan, Bio-ceramic Composite Coatings by Cold Spray Technology, Proc. International Thermal Spray Confer., 2009, p 391-396
71. Y.C. Tsui, C. Doyle, and T.W. Clyne, Plasma Sprayed Hydroxyapatite Coatings on Titanium Substrates Part 2: Optimisation of Coating Properties, Biomaterials, Vol 19, 1998, p 2031-2043
72. S.W.K. Kweh, K.A. Khor, and P.Cheang, An in Vitro Investigation of Plasma Sprayed Hydroxyapatite (HA) Coatings Produced with Flame-Spheroidized Feedstock, Biomaterials, Vol 23 (No. 3), 2002, p 775-785
73. Y. Cao, Q. Lin, M. Tang, X.Q. Ying, S.J. Pang, B.B. Yang, Z.T. Zhang, J.Y. Chen, and X. D. Zhang, The Effect of Cell Behavior on Plasma Sprayed HA Coatings with Different Post Treatment, Key Engg. Mater., Vol 309/311, 2006, p 705-708
74. J.E. Tercero, S. Namin, D. Lahiri, K. Balani, N. Tsoukias, and A. Agarwal, Effect of Carbon Nanotube and Aluminum Oxide addition on Plasma-Sprayed Hydroxyapatite Coating's Mechanical Properties and Biocompatibility, Mater. Sci. Engg., Vol 29 (No. 7), 2009, p 2195-2202
75. Y.P. Lu, Y.M. Chen, S.T. Li, and J.H. Wang, Surface Nanocrystallization of Hydroxyapatite Coating, Acta Biomaterialia, Vol 4 (No. 6), 2008, p 1865-1872.