Influence of deposition temperature on mechanical properties of plasma-sprayed hydroxyapatite coating on titanium alloy with ZrO2 intermediate layer

Journal of Thermal Spray Technology

Volumn 12, Issue 2, 2003, Pages 199-207

  Chou, Bang Yen ^a   Chang, Edward ^a  

^a NATIONAL CHENG KUNG UNIVERSITY   (Taiwan)

Author keywords

Bond coat; Deposition temperature; Hydroxyapatite; Mechanical properties; Plasma spraying

Indexed keywords

DEPOSITION; HYDROXYAPATITE; PLASMA SPRAYING; TITANIUM ALLOYS; ZIRCONIA;

HYDROXYAPATITE COATINGS;

SPRAYED COATINGS;

EID: 0038727648     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1361/105996303770348302     Document Type: Article

References (29)

1. L.L. Hench: "Bioceramics: From Concept to Clinic," J. Am. Ceram. Soc., 1991, 74, pp. 1487-510.
2. R.G.T. Geesink, K. deGroot, and C.P.A.T. Klein: "Bone Bonding to Apatite Coated Implants," J. Bone Joint Surg., 1988, 705, pp. 17-22.
3. H. Oonishi, M Yamamoto, H. Ishimaru, E. Tsuji, S. Kushitani, M. Aono, and Y. Ukon: "The Effect of Hydroxyapatite Coating on Bone-Growth Into Porous Titanium-Alloy Implants," J. Bone Joint Surg., 1989, 71B, pp. 213-16.
4. D. Poulmaire, M. Ducos, Y. Setti, and M.P. Hypolite: "Development of Dental Implants in Titanium With HA Coatings" in Proc. 2nd Plasma-Technik-Symp., Vol. 3, S. Blum-Sandmeier, H. Eschnauer, P. Huber, and A.R. Nicoll, ed., Plasma-Technik AG, Wohlen, Switzerland, 1991, pp. 191-202.
5. D. Matejka, V. Palka, M. Brezovsky, P. Sebo, I. Infner, and M. Pastorok: "Plasma Coated Composite Intraosseous Implants" in Proc. 2nd Plasma-Technik-Symp., Vol. 3, S. Blum-Sandmeier, H. Eschnauer, P. Huber, A.R. Nicoll, ed., Plasma-Technik AG, Wohlen, Switzerland, 1991, pp. 171-77.
6. C.C. Berndt, G.N. Haddad, A.J.D. Farmer, and K.A. Gross: "Thermal Spraying for Bioceramic Applications," Mater. Forum, 1990, 14, pp. 161-73.
7. F. Brossa, A. Cigada, R. Chiesa, L. Paracchini, and C. Consonni: "Adhesion Properties of Plasma Sprayed Hydroxyapatite Coatings for Orthopaedic Prostheses," Biomed. Mater. Eng., 1993, 3, pp. 127-36.
8. Y. Yang, Z. Liu, C. Luo, and Y. Chuang: "Measurements of Residual Stress and Bonding Strength of Plasma Sprayed Laminated Coatings," Surf. Coat. Technol., 1997, 89, pp. 97-100.
9. 3 Coatings on Aluminum Alloy," Scripta Mater., 2000, 42, pp. 631-36.
10. K. Hayashi, T. Inadome, T. Mashima, and Y. Sugioka: "Comparison of Bone-Implant Interface Shear Strength of Solid Hydroxyapatite and Hydroxyapatite-Coated Titanium Implants," J. Biomed. Mater. Res., 1993, 27, pp. 557-63.
11. W.J.A. Dhert, C.P.A. T. Klein, J.G.C. Wolke, E.A. vanderVelde, K. deGroot, and P.M. Rozing: "A Mechanical Investigation of Fluorapatite, Magnesiumwhitlockite, and Hydroxyapatite Plasma-Sprayed Coatings in Goats," J. Biomed. Mater. Res., 1991, 25, pp. 1183-200.
12. B.C. Wang, T.M. Lee, E. Chang, and C.Y. Yang: "The Shear Strength and the Failure Mode of Plasma Sprayed Hydroxyapatite Coating to Bone: The Effect of Coating Thickness," J. Biomed. Mater. Res., 1993, 27, pp. 1315-27.
13. H. Kurzweg, R.B. Heimann, T. Troczynski, and M.L. Wayman: "Development of Plasma-Sprayed Bioceramic Coatings With Bone Coats Based on Titania and Zirconia," Biomaterials, 1998, 19, pp. 1507-11.
14. Y.C. Tsui, C. Doyle, and T.W. Clyne: "Plasma Sprayed Hydroxyapatite Coatings on Titanium Substrates, Part 2: Optimization of Coating Properties," Biomaterials, 1998, 19, pp. 2031-43.
15. D. Lamy, A.C. Pierre, and R.B. Heimann: "Hydroxyapatite Coatings With a Bond Coat of Biomedical Implants by Plasma Projection," J. Mater. Res., 1996, 11(3), pp. 680-86.
16. 2 Intermediate Layer as Bond Coat," Scripta Mater., 2001, 45, pp. 487-93.
17. R. Elsing, O. Knotek, and U. Baiting: "The Influence of Physical Properties and Spraying Parameters on the Creation of Residual Stresses During the Spraying Process," Surf. Coat. Technol., 1990, 41, pp. 147-56.
18. S. Takeuchi, M. Ito, and K. Takeda: "Modelling of Residual Stress in Plasma-Sprayed Coatings: Effect of Substrate Temperature," Surf. Coat. Technol., 1990, 43/44, pp. 426-35.
19. P. Scardi, M. Leoni, and L. Bertamini: "Residual Stress in Plasma Sprayed Partially Stabilized Zirconia TBCs: Influence of the Deposition Temperature," Thin Solid Films, 1996, 278, pp. 96-103.
20. Y.C. Yang and E. Chang: "Influence of Residual Stress on Bonding Strength and Fracture of Plasma-Sprayed Hydroxyapatite Coatings on Ti-6A1-4V Substrate," Biomaterials, 2001, 22, pp. 1827-36.
21. R.A. Miller, R.G. Garlick, and J.L. Smialek: "Phase Distribution in Plasma Sprayed Zirconia-Yittria System," Am. Ceram. Soc. Bull., 1983, 62(12), pp. 1355-59.
22. G. deWith, H.J.A. Vandijk, N. Hattu, and K. Prijs: "Preparation, Microstructure and Mechanical Properties of Dense Polycrystalline Hydroxyapatite," J. Mater. Sci., 1981, 16, pp. 1592-98.
23. M.B. Thomas, R.H. Doremus, M. Jarcho, and R.L. Salsbury: "Dense Hydroxyapatite: Fatigue and Fracture Strength After Various Treatments, From Diametral Tests," J. Mater. Sci., 1980, 15, pp. 891-94.
24. M.J. Filiaggi, N.A. Coombs, and R.M. Pilliar: "Characterization of the Interface in the Plasma-Sprayed HA Coating/Ti-6A1-4V Implant System," J. Blamed. Mater. Res., 1991, 25, pp. 1211-29.
25. A.C. Evans, G.B. Crumley, and R.E. Demaray: "On the Mechanical Behavior of Brittle Coatings and Layers," Oxidat. Met., 1983, 20, pp. 196-216.
26. R. Mevrel: "Cyclic Oxidation of High-Temperature Alloys," Mater. Sci. Technol., 1987, 3, pp. 531-35.
27. V. Sergo, O. Sbaizero, and D.R. Clarke: "Mechanical and Chemical Consequences of the Residual Stresses in Plasma Sprayed Hydroxyapatite Coatings," Biomaterials, 1997, 18(6), pp. 477-82.
28. Y. Han, J. Nan, and K. Xu: "Residual Stresses in Plasma-Sprayed Hydroxyapatite Coatings," J. Mater. Sci. Lett., 1999, 18, pp. 1087-89.
29. J.W. Watson and S.R. Levine: "Deposition Stress Effects on the Life of Thermal Barrier Coatings on Burner Rigs," Thin Solid Films, 1984, 119, pp. 185-93.