High temperature nanoindentation of PMR-15 polyimide

Proceedings of the Society for Experimental Mechanics, Inc.

Volumn 67, Issue , 2010, Pages 491-499

  Lu, Y C ^a   Jones, D C ^a   Tandon, G P ^b,c   Putthanarat, S ^b,c   Schoeppner, G A ^b  

^a UNIVERSITY OF KENTUCKY   (United States)

^b AIR FORCE RESEARCH LABORATORY   (United States)

^c UNIVERSITY OF DAYTON RESEARCH INSTITUTE   (United States)

Author keywords

High temperature; Nanoindentation; PMR 15 polyimide; Viscoelastic creep

Indexed keywords

CONTACT DEPTH; CREEP EFFECTS; ELEVATED TEMPERATURE; HEATING SYSTEM; HIGH TEMPERATURE; HOLDING TIME; INDENTATION EXPERIMENT; INDENTERS; MACROSCOPIC TESTS; NANOINDENTATION EXPERIMENTS; NANOINDENTERS; PMR-15 POLYIMIDE; TEMPERATURE DEPENDENT; UNLOADING RATES; VISCOELASTIC CREEP;

CREEP; EXPERIMENTS; HIGH TEMPERATURE OPERATIONS; MECHANICAL PROPERTIES; POLYIMIDES; UNLOADING;

NANOINDENTATION;

EID: 79960034988     PISSN: 10466789     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Conference Paper

References (27)

1. Oliver WC, Pharr GM (1992) An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 7:1564. doi:10.1557/JMR.1992.1564
2. Oliver WC, Hutchings R, Pethica JB (1986) In: Blau BJ, Lawn BR (Eds) Microindentation Techniques in Materials Science and Engineering, ASTM 889 47
3. Pharr GM, Harding DS, Oliver WC (1994) Measurement of fracture toughness in thin films and small volumes using nano-indentation methods, materials research society symposium
4. Pharr GM, Oliver WC, Brotzen FR (1992) On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation. J Mater Res 7:613-617. doi:10.1557/JMR.1992.0613
5. Doerner MF, Nix WD (1986) A method for interpreting the data from depth-sensing indentation instruments. J Mater Res 4:601-609. doi:10.1557/JMR.1986.0601
6. Oliver WC, Pharr GM (2004) Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. J Mater Res 19:3-20. doi:10.1557/jmr.2004.19.1.3
7. Lu YC, Shinozaki DM (1998) Deep penetration micro-indentation testing of high density polyethylene. Mater Sci Eng A 249:134-144. doi:10.1016/S0921- 5093(98)00571-1
8. Huang G, Wang B, Lu H (2004) Measurements of viscoelastic functions of polymers in the frequency domain by nanoindentation. Mech Time-Depend Mater 8:345-364. doi:10.1007/s11043-004-0440-7 (Pubitemid 40626455)
9. Odgeard GM, Bandorawalla T, Herring HM, Gates TS (2002) Characterization of viscoelastic properties of polymeric materials through nanoindentation, Experimental Mechanics
10. Lu H, Wang B, Ma J, Huang G, Viswanathan H (2003) Measurement of creep compliance of solid polymers by nanoindentation. Mech Time-Depend Mater 7:189-207. doi:10.1023/B:MTDM.0000007217.07156.9b
11. Beake BD, Smith JF (2002) High-temperature nanoindentation testing of fused silica and other materials. Philos Mag A 82:2179
12. Schuh CA, Packard CE, Lund AC (2006) Nanoindentation and contact-mode imaging at high temperatures. J Mater Res 21:725-736. doi:10.1557/jmr.2006.0080
13. Volinsky AA, Moody NR, Gerberich WW (2004) Nanoindentation of Au and Pt/Cu thin films at elevated temperatures. J Mater Res 19(9):2650-2657. doi:10.1557/JMR.2004.0331
14. Sawant A, Tin S (2008) High temperature nanoindnetation of a Re-bearing single crystal Ni-base superalloy Scr Mater 58:275-278. doi:10.1016/j. scriptamat.2007.10.013
15. Schoeppner, GA, Tandon GP, Pochiraju KV (2008) Predicting thermo-oxidative degradation and performance of high temperature polymer matrix composites, in Multiscale Modeling and Simulation of Composite Materials and Structures, Kwon Y, Allen D, Talreja R (Eds), ISBN: 978-0-387-36318-9, Springer Verlag.
16. Putthanarat S, Tandon GP, Schoeppner GA (2008) Influence of aging temperature, time, and environment on thermo-oxidative behavior of PMR-15: Nanomechanical characterization. J Mater Sci 43:6714-6723. doi:10.1007/s10853- 008-2800-1
17. Meador MAB, Lowell CE, Cavano PJ, Herrera-Fierro P (1996) On the oxidative degradation of nadic endcapped polyimides: I. effect of thermocycling on weight loss and crack formation. High Perform Polym 8:363 379. doi:10.1088/0954-0083/8/3/003
18. Data Sheet Cytec Engineered Materials.http://www.cytec.com/engineered- materials/products/Cycom2237.htm, Greenville Texas.
19. Ngan AHW, Tang B (2004) Viscoelastic effects during unloading in depth-sensing indentation. J Mater Res 17(10):2604-2610. doi:10.1557/JMR.2002. 0377
20. Briscoe BJ, Fiori L, Pelillo E (1998) Nano-indentation of polymeric surfaces. J Phys, D, Appl Phys 31:2395-2405. doi:10.1088/0022-3727/31/19/006
21. Cheng YT, Cheng CM (2005) Relationships between initial unloading slope, contact depth, and mechanical properties for conical indentation in linear viscoelastic solids. J Mater Res 20 (4):1046-1052. doi:10.1557/JMR.2005.0141
22. Geng K, Yang F, Grulke EA (2008) Nanoindentation of submicron polymeric coating system. Mater Sci Eng A 479:157-163. doi:10.1016/j.msea.2007.06.042 (Pubitemid 351377472)
23. Mayo MJ, Siegel RW, Liao YX, Nix WD (1992) Nanoindentation of nanocrystalline ZnO. J Mater Res 7:973-979. doi:10.1557/JMR.1992.0973
24. Cheng Y-T, Cheng C-M (2001) Scaling relationships in indentation of power-law creep solids using self-similar indenters. Philos Mag Lett 81:9-16. doi:10.1080/09500830010008457 (Pubitemid 34586325)
25. Putthanarat S, Tandon GP, Schoeppner GA (2007) Influence of polishing time on thermal-oxidation characterization of isothermoally aged PMR-15 resin. Polym Degrad Stab 92:2110-2120. doi:10.1016/j.polymdegradstab.2007.07.007 (Pubitemid 350030268)
26. Johnson LL, Eby RK, Meador MAB (2003) Investigation of oxidation profile in PMR-15 polyimide using atomic force microscope (AFM). Polymer 44:187. doi:10.1016/S0032-3861(02)00726-7
27. Young RJ, Lovell PA (1991) Introduction to Polymers, 2nd edn. CRC, New York