Rotor position estimation

IEEE Industrial Electronics Magazine

Volumn 5, Issue 2, 2011, Pages 24-36

  Briz, Fernando ^a   Degner, Michael W ^b  

^a UNIVERSITY OF OVIEDO   (Spain)

^b UNIVERSITY OF WISCONSIN MADISON   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AC DRIVES; INTENSIVE RESEARCH; ROTOR POSITION; ROTOR POSITION ESTIMATION; SENSOR LESS CONTROL; SIZE REDUCTIONS;

COST REDUCTION;

EID: 79959608184     PISSN: 19324529     EISSN: None     Source Type: Journal    
DOI: 10.1109/MIE.2011.941118     Document Type: Review

References (53)

1. T. Ohtani, N. Takada, and K. Tanaka, "Vector control of induction motor without shaft encoder," IEEE Trans. Ind. Applicat., vol. 28, no. 1, pp. 157-165, Jan./ Feb. 1992.
2. J. Holtz, "Speed estimation and sensorless control of ac drives," in Proc. Industrial Electronics, Control, and Instrumentation (IECON'93), Maui, HI, Nov. 1993, vol. 2, pp. 649-654.
3. H. Kubota and K. Matsuse, "Speed sensorless field oriented control of induction motor with rotor resistance adaptation," IEEE Trans. Ind. Applicat., vol. 30, no. 5, pp. 1219-1224, Sept./Oct. 1994.
4. J. Jiang and J. Holtz, "High dynamic speed sensorless ac drive with on-line model parameter tuning for steady-state accuracy," IEEE Trans. Ind. Electron., vol. 44, no. 2, pp. 240-246, Apr. 1997. (Pubitemid 127828646)
5. J. Holtz and J. Quan, "Drift- and parameter- compensated flux estimator for persistent zero-stator-frequency operation of sensorless- controlled induction motors," IEEE Trans. Ind. Applicat., vol. 39, no. 4, pp. 1052-1060, July-Aug. 2003.
6. J. Holtz, "Sensorless position control of induction motors-an emerging technology," IEEE Trans. Ind. Electron., vol. 45, no. 6, pp. 840-851, Dec. 1998.
7. J. Holtz, "Sensorless control of induction motor drives," in Proc. IEEE, vol. 90, no. 8, pp. 1359-1394, Aug. 2002. (Pubitemid 43785863)
8. J. Holtz, "Sensorless control of induction machines̈With or without signal injection?" IEEE Trans. Ind. Electron., vol. 53, no. 1, pp. 7-30, Feb. 2006. (Pubitemid 43245272)
9. N. Bianchi and S. Bolognani, "Influence of rotor geometry of an IPM motor on sensorless control feasibility," IEEE Trans. Ind. Applicat., vol. 43, no. 1, pp. 87-96, Jan.-Feb. 2007. (Pubitemid 46431379)
10. N. Bianchi, S. Bolognani, J.-H. Jang, and S.- K. Sul, "Advantages of inset PM machines for zero-speed sensorless position detection," IEEE Trans. Ind. Applicat., vol. 44, no. 4, pp. 1190-1198, July-Aug. 2008.
11. S. Wu, D. D. Reigosa, Y. Shibukawa, M. A. Leetmaa, R. D. Lorenz, and Y. Li, "Interior permanent magnet synchronous motor design for improving self-sensing performance at very low speed," in Proc. Int. Conf. Electrical Machines and Systems (ICEMS) 2008, Oct. 17-20, 2008, pp. 3278- 3283.
12. M. W. Degner and R. D. Lorenz, "Position estimation in induction machines utilizing rotor bar slot harmonics and carrier frequency signal injection," IEEE Trans. Ind. Applicat., vol. 36, no. 3, pp. 736-742, May/June 2000.
13. T. M. Wolbank and M. K. Metwally, "Sensorless control of induction machines with different designs̈Impact on signal processing," in Proc. European Conf. Power Electronics and Applications (EPE'09), Barcelona, Spain, Sept. 2009, pp. 1-8.
14. P. L. Jansen and R. D. Lorenz, "Transducerless position and velocity estimation in induction and salient ac machines," IEEE Trans. Ind. Applicat., vol. 31, no. 2, pp. 240-247, Mar./Apr. 1995.
15. P. L. Jansen and R. D. Lorenz, "Transducerless field orientation concepts employing saturation-induced saliencies in induction machines," IEEE Trans. Ind. Applicat., vol. 32, no. 6, pp. 1380-1393, Nov./Dec. 1996. (Pubitemid 126777281)
16. F. Briz, M. W. Degner, P. Garcia, and R. D. Lorenz, "Comparison of saliency-based sensorless control techniques for ac machines," IEEE Trans. Ind. Applicat., vol. 40, no. 4, pp. 1107-1115, July-Aug. 2004.
17. P. Garcia, F. Briz, M. W. Degner, and D. Diaz-Reigosa, "Accuracy, bandwidth, and stability limits of carrier-signal-injectionbased sensorless control methods," IEEE Trans. Ind. Applicat., vol. 43, no. 4, pp. 990-1000, July-Aug. 2007. (Pubitemid 47249972)
18. D. Raca, P. Garcia, D. D. Reigosa, F. Briz, and R. D. Lorenz, "Carrier-signal selection for sensorless control of PM synchronous machines at zero and very low speeds," IEEE Trans. Ind. Applicat., vol. 46, no. 1, pp. 167-178, Jan.-Feb. 2010.
19. D. D. Reigosa, P. Garcia, D. Raca, F. Briz, and R. D. Lorenz, "Measurement and adaptive decoupling of cross-saturation effects and secondary saliencies in sensorless controlled IPM synchronous machines," IEEE Trans. Ind. Applicat., vol. 44, no. 6, pp. 1758-1767, Nov.-Dec. 2008.
20. F. Briz, A. Diez, and M. W. Degner, "Dynamic operation of carrier-signal-injection- based sensorless direct field-oriented ac drives," IEEE Trans. Ind. Applicat., vol. 36, no. 5, pp. 1360-1368, Sept./Oct. 2000.
21. A. Consoli, G. Scarcella, and A. Testa, "Industry application of zero-speed sensorless control techniques for PM synchronous motors," IEEE Trans. Ind. Applicat., vol. 37, no. 2, pp. 513-521, Mar./ Apr. 2001. (Pubitemid 32407285)
22. M. W. Degner and R. D. Lorenz, "Using multiple saliencies for the estimation of flux, position, and velocity in ac machines," IEEE Trans. Ind. Applicat., vol. 34, no. 5, pp. 1097-1104, Sept./Oct. 1998. (Pubitemid 128740252)
23. Q. Gao, G. Asher, and M. Sumner, "Sensorless position and speed control of induction motors using high-frequency injection and without offline precommissioning," IEEE Trans. Ind. Electron., vol. 54, no. 5, pp. 2474-2481, Oct. 2007.
24. C. Silva, G. M. Asher, and M. Sumner, "Hybrid rotor position observer for wide speed-range sensorless PM motor drives including zero speed," IEEE Trans. Ind. Electron., vol. 53, no. 2, pp. 373-378, Apr. 2006.
25. N. Teske, G. M. Asher, M. Sumner, and K. J. Bradley, "Suppression of saturation saliency effects for the sensorless position control of induction motor drives under loaded conditions," IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 1142-1150, Oct. 2000.
26. A. Consoli, G. Scarcella, and A. Testa, "A new zero-frequency flux-position detection approach for direct-field-oriented-control drives," IEEE Trans. Ind. Applicat., vol. 36, no. 3, pp. 797-804, May/June 2000.
27. F. Briz, M. W. Degner, P. Garcia, and J. M. Guerrero, "Rotor position estimation of ac machines using the zero-sequence carriersignal voltage," IEEE Trans. Ind. Applicat., vol. 41, no. 6, pp. 1637-1646, Nov./Dec. 2005. (Pubitemid 41824655)
28. F. Briz, M. W. Degner, P. G. Fernandez, and A. B. Diez, "Rotor and flux position estimation in delta-connected ac Machines using the zero-sequence carrier-signal current," IEEE Trans. Ind. Applicat., vol. 42, no. 2, pp. 495-503, Mar./Apr. 2006.
29. M. J. Corley and R. D. Lorenz, "Rotor position and velocity estimation for a salientpole permanent magnet synchronous machine at standstill and high speeds," IEEE Trans. Ind. Applicat., vol. 34, no. 4, pp. 784-789, July/Aug. 1998. (Pubitemid 128740215)
30. J.-I. Ha and S.-K. Sul, "Sensorless field-orientation control of an induction machine by high-frequency signal injection," IEEE Trans. Ind. Applicat., vol. 35, no. 1, pp. 45- 51, Jan./Feb. 1999.
31. J.-I. Ha, K. Ide, T. Sawa, and S.-K. Sul, "Sensorless rotor position estimation of an interior permanent-magnet motor from initial states," IEEE Trans. Ind. Applicat., vol. 39, no. 3, pp. 761-767, May-June 2003.
32. C.-H. Choi and J.-K. Seok, "Pulsating signal injection-based axis switching sensorless control of surface-mounted permanentmagnet motors for minimal zero-current clamping effects," IEEE Trans. Ind. Applicat., vol. 44, no. 6, pp. 1741-1748, Nov./ Dec. 2008.
33. M. Linke, R. Kennel, and J. Holtz, "Sensorless speed and position control of synchronous machines using alternating carrier injection," in Proc. Int. Electric Machines and Drives Conf. (IEMdc'03), Madison, June 2003, vol. 2, pp. 1211-1217.
34. J. Holtz, "Acquisition of position error and magnet polarity for sensorless control of PM synchronous machines," IEEE Trans. Ind. Applicat., vol. 44, no. 4, pp. 1172-1180, July-Aug. 2008.
35. J. Holtz and H. Pan, "Acquisition of rotor anisotropy signals in sensorless position control systems," IEEE Trans. Ind. Applicat., vol. 40, no. 5, pp. 1379-1387, Sept./ Oct. 2004.
36. J. Holtz and H. Pan, "Elimination of saturation effects in sensorless position-controlled induction motors," IEEE Trans. Ind. Applicat., vol. 40, no. 2, pp. 623-631, Mar./ Apr. 2004.
37. C. S. Staines, C. Caruana, G. M. Asher, and M. Sumner, "Sensorless control of induction machines at zero and low frequency using zero sequence currents," IEEE Trans. Ind. Electron., vol. 53, no. 1, pp. 195-206, Feb. 2006. (Pubitemid 43248759)
38. Q. Gao, G. M. Asher, M. Sumner, and P. Makys, "Sensorless control of induction machines, including zero frequency using only fundamental PWM excitation," in Proc. IEEE Industrial Electronics (IECON) 2006, Paris, France, Nov. 2006, pp. 793-798.
39. J. Holtz and J. Juliet, "Sensorless acquisition of the rotor position angle of induction motors with arbitrary stator windings," IEEE Trans. Ind. Applicat., vol. 41, no. 6, pp. 1675-1682, Nov./Dec. 2005. (Pubitemid 41824659)
40. Q. Gao, G. M. Asher, M. Sumner, and L. Empringham, "Position estimation of a matrix-converter-fed ac PM machine from zero to high speed using PWM excitation," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 2030-2038, June 2009.
41. E. Robeischl and M. Schroedl, "Optimized INFORM measurement sequence for sensorless PM synchronous motor drives with respect to minimum current distortion," IEEE Trans. Ind. Applicat., vol. 40, no. 2, pp. 591-598, Mar./Apr. 2004.
42. C. S. Staines, G. M. Asher, and K. J. Bradley, "A periodic burst injection method for deriving rotor position in saturated cage-salient induction motors without a shaft encoder," IEEE Trans. Ind. Applicat., vol. 35, pp. 851-858, July/Aug. 1999.
43. L. A. S. Ribeiro, M. W. Degner, F. Briz, and R. D. Lorenz, "Comparison of carrier signal voltage and current injection for the estimation of flux angle or rotor position," in Proc. IAS Annu. Meeting, Oct. 12-15, 1998, vol. 1, pp. 452-459.
44. W. Hammel and R. M. Kennel, "Integration of alternating carrier injection in position sensorless control without any filtering," in Proc. Energy Conversion Congr. and Exposition (ECCE) 2009, San Jose, Sept. 2009, pp. 3830-3836.
45. Y.-d. Yoon, S.-k. Sul, S. Morimoto, and K. Ide, "High bandwidth sensorless algorithm for ac machines based on squarewave type voltage injection," in Proc. Energy Conversion Congr. and Exposition (ECCE) 2009, San Jose, Sept. 2009, pp. 2123-2130.
46. C. Caruana, G. M. Asher, and M. Sumner, "Performance of HF signal injection techniques for zero-low-frequency vector control of induction Machines under sensorless conditions," IEEE Trans. Ind. Electron., vol. 53, no. 1, pp. 225-238, Feb. 2006. (Pubitemid 43245290)
47. J. M. Guerrero, M. Leetmaa, F. Briz, A. Zamarron, and R. D. Lorenz, "Inverter nonlinearity effects in high-frequency signal- injection-based sensorless control methods," IEEE Trans. Ind. Applicat., vol. 41, no. 2, pp. 618-626, Mar./Apr 2005. (Pubitemid 40564668)
48. C.-H. Choi and J.-K. Seok, "Compensation of zero-current clamping effects in highfrequency- signal-injection-based sensorless PM motor drives," IEEE Trans. Ind. Applicat., vol. 43, no. 5, pp. 1258-1265, Sept./Oct 2007. (Pubitemid 47570226)
49. T. M. Wolbank, M. A. Vogelsberger, and M. Riepler, "Identification and compensation of inverter dead-time effect on zero speed sensorless control of ac machines based on voltage pulse injection," in Proc. IEEE Power Electronics Specialists Conf. (PESC) 2008, Rhodes, Greece, June 2008, pp. 2844-2849.
50. R. Raute, C. Caruana, C. S. Staines, J. Cilia, M. Sumner, and M. Asher, "Analysis and compensation of inverter non-linearity effect on a sensorless PMSM drive at very low and zero speed operation," IEEE Trans. Ind. Electron., vol. 57, no. 12, pp. 4065-4074, Dec. 2010.
51. T. M. Wolbank and M. K. Metwally, "Sensorless position and torque control of induction motors based on transient signal injection and advanced signal processing," in Proc. Asia-Pacific Economic Cooperation (APEC) 2009, Washington, DC, Feb. 2009, pp. 216-222.
52. P. Garcia, F. Briz, D. Raca, and R. D. Lorenz, "Saliency-tracking- based sensorless control of ac machines using structured neural networks," IEEE Trans. Ind. Applicat., vol. 43, no. 1, pp. 77-86, Jan./Feb 2007. (Pubitemid 46431378)
53. R. Raute, C. Caruana, C. S. Staines, J. Cilia, M. Sumner, and G. Asher, "Sensorless control of induction machines by using PWM harmonics for rotor bar slotting detection," in Proc. IAS Annu. Meeting, Edmonton, Canada, Oct. 2008, pp. 1-8.