Relationship between microstructure, microhardness and corrosion sensitivity of an AA 2024-T3 friction stir welded joint

Corrosion Science

Volumn 53, Issue 9, 2011, Pages 3026-3034

  Bousquet, Emilie ^a   Poulon Quintin, Angéline ^b   Puiggali, Monique ^a   Devos, Olivier ^a   Touzet, Marie ^a  

^a UNIVERSITÉ DE BORDEAUX   (France)

^b CNRS   (France)

Author keywords

A. Aluminum alloys; C. Intergranular corrosion; C. Pitting corrosion; C. Welding

Indexed keywords

ALUMINUM ALLOYS; ALUMINUM CORROSION; CORROSIVE EFFECTS; FRICTION; FRICTION STIR WELDING; GRAIN BOUNDARIES; HEAT AFFECTED ZONE; MICROHARDNESS; PITTING;

CORROSION BEHAVIOR; FRICTION STIR WELDED JOINTS; INTER-METALLIC PARTICLE; INTERGRANULAR PRECIPITATES; INTRAGRANULAR PRECIPITATES; MICROSTRUCTURAL ANALYSIS; OPEN CIRCUIT POTENTIAL MEASUREMENTS; VICKERS MICROHARDNESS;

WELD DECAY;

EID: 79959377266     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2011.05.049     Document Type: Article

References (42)

1. 3: A preliminary study. Scr. Mater. 2001, 45:75-80.
2. Benavides S., Li Y., Murr L.E., Brown D., McClure J.C. Low temperature friction-stir welding of 2024 aluminium. Scr. Mater. 1999, 41:809-815.
3. Nakata K., Kim Y.G., Ushio M., Hashimoto T., Jyogan S. Weldability of high strengh aluminium alloys by friction-stir welding. ISIJ. Int. 2000, 40:15-19.
4. Field D.P., Nelson T.W., Hovanski Y., V Jata K. Heterogeneity of cristallographic texture in friction-stir welding of aluminium. Metall. Mater. Trans. A 2001, 32:2869-2877.
5. Su J.-Q., Nelson T.W., Mishra R., Mahoney M. Microstructural investigation of friction-stir welded 7050-T651 aluminium. Acta Mater. 2003, 51:713-729.
6. Yang B., Yan J., Sutton M.A., Reynolds A.P. Banded microstructure in AA2024-T351, AA2524-T351 friction-stir welds Part I. Metallurgical studies. Mater. Sci. Eng. A 2004, 364:55-65.
7. Sutton M.A., Reynolds A.P., Yang B., Taylor R. Mode I fracture and microstructure for 2024-T3 friction-stir weldeds. Mater. Sci. Eng. A 2003, 354:6-16.
8. Mahoney M.W., Rhodes C.G., Flintoff J.G., Spurling R.A., Bingel W.H. Properties of friction-stir-welded 7075 T651 aluminum. Metall. Mater. Trans. A 1998, 29:1955-1964.
9. Jones M.J., Heurtier P., Desrayaud C., Montheillet F., Allehaux D., Driver J.H. Correlation between microstructure and microhardness in a friction stir welded 2024 aluminium alloy. Scr. Mater. 2005, 52:693-697.
10. McNelley T.R., Swaminathan S., Su J.Q. Recrystallization mechanisms during friction stir welding. Scr. Mater. 2008, 58:349-354.
11. Sutton M.A., Yang B., Reynolds A.P., Taylor R. Microstructural studies of friction stir welds in 2024-T3 aluminum. Mater. Sci. Eng. A 2002, 323:160-166.
12. Sullivan A., Robson J.D. Microstructural properties of friction stir welded and post-weld heat-treated 7449 aluminium alloy thick plate. Mater. Sci. Eng. A 2008, 478:351-360.
13. Genevois C., Deschamps A., Denquin A., Doisneau-cottignies B. Quantitative investigation of precipitation and mechanical behaviour for AA2024 friction stir welds. Acta Mater. 2005, 53:2447-2458.
14. Lumsden J.B., Mahoney M.W., Rhodes C.G., Pollock G.A. Corrosion behavior of friction-stir-welded AA7050-T7651. Corrosion 2003, 59:212-219.
15. Frankel G.S., Xia Z. Localized corrosion and stress corrosion cracking resistance of friction stir welded aluminium alloy 5454. Corrosion 1999, 55:139-150.
16. Lumsden J.B., Mahoney M.W., Pollock G., Rhodes C.G. Intergranular corrosion following friction-stir-welding of aluminium alloy 7075-T651. Corrosion 1999, 55:1127-1135.
17. Fonda R.W., Pao P.S., Jones H.N., Feng C.R., Connolly B.J., Davenport A.J. Microstructure, mechanical properties and corrosion of friction stir welded Al 5456. Mater. Sci. Eng. A 2009, 519:1-8.
18. Jariyaboon M., Davenport A.J., Ambat R., Connolly B.J., Williams S.W., Price D.A. The effect of welding parameters on the corrosion behaviour of friction stirwelded AA2024-T351. Corros. Sci. 2007, 49:877-909.
19. Squillace A., De Fenzo A., Giorleo G., Bellucci F. A comparison between FSW and TIG welding techniques: modifications of microstructure and pitting corrosion resistance in a AA2024-T3 butt joints. J. Mater. Proc. Technol. 2004, 152:97-105.
20. Wadeson D.A., Zhou X., Thompson G.E., Skeldon P., Djapic Oosterkamp L., Scamans G. Corrosion behaviour of friction stir welded AA7108 T79 aluminium alloy. Corros. Sci. 2006, 48:887-897.
21. Corral J., Trillo E.A., Li Y., Murr L.E. Corrosion of friction-stir welded aluminum alloys 2024 and 2195. J. Mater. Sci. Lett. 2000, 19:2117-2122.
22. E.Bousquet, M.Puiggali, A.Poulon-Quintin, O.Devos, M.Touzet, Correlation between microstructure, microhardness and corrosion sensitivity of AA2024-T3 FSW weld joints, in: EUROCORR, Moscow, Russia, 2010.
23. Nikseresht Z., Karimzadeh F., Golozar M.A., Heidarbeigy M. Effect of heat treatment on microstructure and corrosion behavior of Al6061 alloy weldment. Mater. Design 2010, 31:2643-2648.
24. Kang J., Fu R-D., Luan G-H., Dong C-L., He M. In-situ investigation on the pitting corrosion behavior of friction stir welded joint of AA2024-T3 aluminium alloy. Corros. Sci. 2010, 52:620-626.
25. Xu W., Liu J. Microstructure and pitting corrosion of friction stir welded joints in 2219-O aluminum alloy thick plate. Corros. Sci. 2009, 51:2743-2751.
26. Jariyaboon M., Davenport A.J., Ambat R., Connolly B.J., William S.W., Price D.A. The effect of cryogenic CO2 cooling oncorrosion behaviour of friction stir welded AA2024-T351. Corros. Eng. Sci. Technol. 2009, 44:425-432.
27. ASTM-G110 Standard practice for evaluating intergranular corrosion resistance of heat treatable aluminium alloys by immersion in Sodium chloride+Hydogen pexoxide solution 2003.
28. van der Walde K., Hillberry B.M. Characterization of pitting damage and prediction of remaining fatigue life. Int. J. Fatigue 2008, 30:106-118.
29. Sanchez-Amaya J.M., Bethencourt M., Gonzalez-Rovira L., Botana F.J. Noise resistance and shot noise parameters on the study of IGC of aluminium alloys with different heat treatments. Electrochim. Acta 2007, 52:6569-6583.
30. Khoshnaw F.M., Gardi R.H. Effect of aging time and temperature on exfoliation corrosion of aluminium alloys 2024-T3 and 7075-T6. Mater. Corros. 2007, 58:345-347.
31. Zhang W., Frankel G.S. Localized corrosion growth kinetics in AA2024-T3 alloys. J. Electrochem. Soc. 2002, 149:510-519.
32. Knight S.P., Salagaras M., Trueman A.R. The study of intergranular corrosion in aircraft aluminium alloys using X-ray tomography. Corros. Sci. 2011, 53:727-734.
33. Sasaki H., Isaacs H.S. Origins of electrochemical noise during pitting corrosion of aluminium. J. Electrochem. Soc. 2004, 151:124-133.
34. Sanchez-Amaya J.M., Cottis R.A., Botana F.J. Shot noise and statistical parameters for the estimation of corrosion mechanisms. Corros. Sci. 2005, 47:3280-3299.
35. Guillaumin V., Mankowski G. Localized corrosion of 2024-T3 aluminium alloy in chloride media. Corros. Sci. 1999, 30:421-438.
36. Liao C-M, Olive J.M., Gao M., Wie R.P. In situ monitoring of pitting corrosion in aluminium alloy 2024. Corrosion 1998, 54:451-458.
37. Ilevbare G.O., Schneider O., Kelly R.G., Scully J.R. In situ confocal laser scanning microscopy of AA 2024-T3 corrosion metrology. J. Electrochem. Soc. 2004, 151:453-464.
38. Kovarik L., Court S.A. GPB zones and composite GPB/GPBII zones in Al-Cu-Mg alloys. Acta Mater. 2008, 56:4804-4815.
39. 2 CuMg coarse particles in copper-rich aluminium alloys. Corros. Sci. 2006, 48:3838-3851.
40. Lacroix L., Ressier L., Blanc C., Mankowski G. Combination of AFM, SKPFM and SIMS to study the corrosion behavior of S-phase particles in AA2024-T351. J. Electrochem. Soc. 2008, 151:131-137.
41. 2 CuMg) particles in aluminum alloy 2024-T3. J. Electrochem. Soc. 1997, 144:2620-2628.
42. Leblanc P., Frankel G.S. A study of corrosion and pitting initiation of AA2024-T3. J. Electrochem. Soc. 2002, 149:239-247.