In vitro knee wear, kinematics, and particle morphology among different bearing geometries in a mobile bearing knee system

Journal of ASTM International

Volumn 8, Issue 5, 2011, Pages

  Grupp, T M ^a,b   Miehlke, R K ^c,d   Hintner, M ^e   Schwiesau, J ^a,b   Kaddick, C ^e  

^a B Braun Melsungen AG   (Germany)

^b LUDWIG MAXIMILIANS UNIVERSITY   (Germany)

^c Rhine Main Centre for Joint Diseases   (Germany)

^d Muensterland Centre for Joint Diseases   (Germany)

^e EndoLab Mechanical Engineering GmbH   (Germany)

Author keywords

In vitro knee wear; Influence of bearing geometries; Mobile bearing design; Total knee arthroplasty

Indexed keywords

BEARING CONFIGURATION; BEARING MATERIALS; DESIGN ALTERNATIVES; FLOATING PLATFORMS; FUNDAMENTAL DESIGN; GERMANY; IN-VITRO; INFLUENCE OF BEARING GEOMETRIES; KNEE REPLACEMENT; KNEE WEAR; MEAN SIZE; MEAN VALUES; MOBILE BEARING; MOBILE BEARING KNEE; PARTICLE MORPHOLOGIES; PARTICLE RELEASE; POLYETHYLENE PARTICLES; PRE-CLINICAL; ROTATING PLATFORM; ROTATION ANGLES; TOTAL KNEE ARTHROPLASTY; WEAR SIMULATORS;

ABRASION; ABRASIVES; BEARINGS (STRUCTURAL); DESIGN; JOINT PROSTHESES; KINEMATICS; MORPHOLOGY; POLYETHYLENES; ROTATION; SURGERY; THERMOPLASTICS;

PHYSIOLOGICAL MODELS;

EID: 79958722003     PISSN: None     EISSN: 1546962X     Source Type: Journal    
DOI: 10.1520/JAI103304     Document Type: Article

References (32)

1. Illgen, R., Tueting, J., Enright, T., Schreibman, K., McBeath, A., and Heiner, J., "Hybrid Total Knee Arthroplasty: A Retrospective Analysis of Clinical and Radiographic Outcomes at Average 10 Years Follow-Up," J. Arthroplasty, Vol. 19, 2004, pp. 95-100. (Pubitemid 39349025)
2. Karachalios, T., Roidis, N., Giotikas, D., Bargiotas, K., Varitimidis, S., and Malizos, K. N., "A Mid-Term Clinical Outcome Study of the Advance Medial Pivot Knee Arthroplasty," The Knee, Vol. 16, 2009, pp. 484-488.
3. Haaker, R. G., Stockheim, M., Kamp, M., Proff, G., Breitenfelder, J., and Ottersbach, A., "Computer- Assisted Navigation Increases Precision of Component Placement in Total Knee Arthroplasty," Clin. Orthop. Relat. Res., Vol. 433, 2005, pp. 152-159. (Pubitemid 40489263)
4. Fuchs, R., Mills, E. L., Clarke, H. D., Scuderi, G. R., Scott, W. N., and Insall, J. N., "A Third-Generation, Posterior-Stabilized Knee Prosthesis: Early Results After Follow-Up of 2 to 6 Years," J. Arthroplasty, Vol. 21, 2006, pp. 821-825. (Pubitemid 44293230)
5. Hardeman, F., Vandenneucker, H., Van, L. J., and Bellemans, J., "Cementless Total Knee Arthroplasty with Profix: A 8- to 10-year follow-up study," The Knee, Vol. 13, 2006, pp. 419-421. (Pubitemid 44667505)
6. Evans, M. C., Parsons, E. M., Scott, R. D., Thornhill, T. S., and Zurakowski, D., "Comparative Flexion After Rotating-Platform vs Fixed-Bearing Total Knee Arthroplasty," J. Arthroplasty, Vol. 21, 2006, pp. 985-991. (Pubitemid 44485414)
7. Chana, R., Shenava, Y., Nicholl, A. P., Lusted, F. J., Skinner, P. W., and Gibb, P. A., "Five- to 8-Year Results of the Uncemented Duracon Total Knee Arthroplasty System," J. Arthroplasty, Vol. 23, 2008, pp. 677-682.
8. Faris, P. M., Keating, E. M., Farris, A., Meding, J. B., and Ritter, M. A., "Hybrid Total Knee Arthroplasty: 13-Year Survivorship of AGC Total Knee Systems with Average 7 Years Followup," Clin. Orthop. Relat. Res., Vol. 466, 2008, pp. 1204-1209.
9. Morra, E. A. and Greenwald, A. S., "Tibial plateau abrasion in mobile bearing knee systems during walking gait III-A Finite Element Study," Proceedings 71st Annual Meeting of the American Academy of Orthopaedic Surgeons, San Francisco, CA, March 10-14, 2004, http://orl-inc.com.
10. Morra, E. A. and Greenwald, A. S., "Polymer Insert Stress in Total Knee Designs During High- Flexion Activities-A Finite Element Study," J. Bone Jt. Surg., Am. Vol., Vol. 87A, 2005, pp. 119-124.
11. Callaghan, J. J., Insall, J. N., Greenwald, A. S., Dennis, D. A., Komistek, R. D., Murray, D. W., Bourne, R. B., Rorabeck, C. H., and Dorr, L. D., "Mobile-Bearing Knee Replacement," J. Bone Jt. Surg., Am. Vol., Vol. 82A, 2000, pp. 1020-1041.
12. Greenwald, A. S. and Heim, C. S., "Mobile-Bearing Knee Systems: Ultra-High Molecular Weight Polyethylene Wear and Design Issues," Instr Course Lect, Vol. 54, 2005, pp. 195-205.
13. McEwen, H. M. J., Barnett, P. I., Bell, C. J., Farrar, R., Auger, D. D., Stone, M. H., and Fisher, J., "The Influence of Design, Materials and Kinematics on the In Vitro Wear of Total Knee Replacements," J. Biomech., Vol. 38, 2005, pp. 357-365. (Pubitemid 39642958)
14. Minoda, Y., Kobayashi, A., Iwaki, H., Miyaguchi, M., Kadoya, Y., Ohashi, H., and Takaoka, K., "Characteristics of Polyethylene Wear Particles Isolated from Synovial Fluid After Mobile-Bearing and Posterior-Stabilized Total Knee Arthroplasties," J. Biomed. Mater. Res., Vol. 71B, 2004, pp. 1-6. (Pubitemid 39299398)
15. Haider, H. and Garvin, K., "Rotating Platform Versus Fixed-Bearing Total Knees-An In Vitro Study Of Wear," Clin. Orthop. Relat. Res., Vol. 466, 2008, pp. 2677-2685.
16. Grupp, T. M., Kaddick, C., Schwiesau, J., Maas, A., and Stulberg, S. D., "Fixed and Mobile Bearing Total Knee Arthroplasty-Influence on Wear Generation, Corresponding Wear Areas, Knee Kinematics and Particle Composition," Clin. Biomech. (Bristol, Avon), Vol. 24, 2009, pp. 210-217.
17. Noordin, S., Schmalzried, T. P., Campbell, P. A., and Amstutz, H. C., "Synovial Fluid From Patients with Prosthetic Joint Arthroplasty: Protein Concentration and In VivoWear of Polyethylene," Orthop. Trans., Vol. 21, 1997 pp. 1022-1023.
18. Yao, J. Q., Laurent, M. P., Glibertson, L. N. Blanchard, C. R., Crowninshield, R. D., and Jacobs, J. J., "A Comparison of Biological Lucricants to Bovine Calf Serum for Total Joint Wear Testing," 48th Annual Meeting of the Orthopaedic Research Society, Dallas, TX, 2002, Poster No. 1004.
19. Mazzucco, D., Scott, R., and Spector, M., "Composition of Joint Fluid in Patients Undergoing Total Knee Replacement and Revision Arthroplasty: Correlation with Flow Properties," Biomaterials, Vol. 25, 2004, pp. 4433-4445. (Pubitemid 38388603)
20. Niedzwiecki, S., Klapperich, C., Short, J., Jani, S., Ries, M., and Pruitt, L., "Comparison of Three Joint Simulator Wear Debris Isolation Techniques: Acid Digestion, Base Digestion, and Enzyme Cleavage," J. Biomed. Mater. Res., Vol. 56, 2001, pp. 245-249. (Pubitemid 32520700)
21. Affatato, S., Fernandes, B., Tucci, A., Esposito, L., and Toni, A., "Isolation and Morphological Characterisation of UHMWPE Wear Debris Generated In Vitro," Biomaterials, Vol. 22, 2001, pp. 2325-2331. (Pubitemid 32666225)
22. Kawanabe, K., Clarc, I. C., Tamura, J., Akagi, M., Good, V. D., Williams, P. A., and Yamamoto, K., "Effects of A-P Translation and Rotation on the Wear of UHMWPE in Total Knee Joint Simulator," J. Biomed. Mater. Res., Vol. 54, 2001, pp. 400-406. (Pubitemid 32016706)
23. Barnett, P. I., Fisher, J., Auger, D. D., Stone, M. H., and Ingham, E., "Comparison of Wear in a Total Knee Replacement Under Different Kinematic Conditions," J. Mater. Sci. Mater. Med., Vol. 12, 2001, pp. 1039-1042. (Pubitemid 34062132)
24. Bell, C. J., Haider, H., and Blunn, G. W., "Wear of Fixed versus Mobile Bearing Knees Under Normal and 'Enhanced' Walking Cycles," Sixth World Biomaterials Congress Transactions 873, Hawaii, May, 2000, p. 873.
25. D'Lima, D. D., Hermida, J. C., Chen, P. C., and Colwell, C. W., Jr., "Polyethylene Wear and Variations in Knee Kinematics," Clin. Orthop. Relat. Res., Vol. 392, 2001, pp. 124-130. (Pubitemid 33054936)
26. DesJardins, J. D., Banks, S. A., Benson, L. C., Pace, T., and LaBerge, M., "A Direct Comparison of Patient and Force-Controlled Simulator Total Knee Replacement Kinematics," J. Biomech., Vol. 40, 2007, pp. 3458-3466. (Pubitemid 47632604)
27. Wang, A., "A Unified Theory of Wear for Ultra-High Molecular Weight Polyethylene in Multi- Directional Sliding," Wear, Vol. 248, 2001, pp. 38-47. (Pubitemid 32241655)
28. Kang, L., Galvin, A. L., Brown, T. D., Jin, Z., and Fisher, J., "Quantification of the Effect of Cross-Shear on the Wear of Conventional and Highly Cross-Linked UHMWPE," J. Biomech., Vol. 41(2),2008, pp. 340-346.
29. Wang, A., Sun, D. C., Yau, S. S., Edwards, B., Sokol, M., Essner, A., Polineni, V. K., Stark, C., and Dumbleton, J. H., "Orientation Softening in the Deformation and Wear of Ultra High Molecular Weight Polyethylene," Wear, Vols. 203-204, 1997, pp. 230-241.
30. Fisher, J., McEwen, H., Tipper, J., Jennings, L., Farrar, R., Stone, M., and Ingham, E., "Wear- Simulation Analysis of Rotating-Platform Mobile-Bearing Knees," Orthopedics, Vol. 29(9),2006, pp. 36-41.
31. Green, T. R., Fisher, J., Stone, M., Wroblewski, B. M., and Ingham, E., "Polyethylene Particles of a 'Critical Size'Are Necessary for the Induction of Cytokines by Macrophages In-Vitro," Biomaterials, Vol. 19, 1998, pp. 2297-2302. (Pubitemid 28550396)
32. Ingham, E. and Fisher, J., "Biological Reactions to Wear Debris in Total Joint Replacement," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., Vol. 214, 2000, pp. 21-37. (Pubitemid 32508299)