Novel applications of composite structures to robots, machine tools and automobiles

Composite Structures

Volumn 66, Issue 1-4, 2004, Pages 17-39

  Lee, Dai Gil ^a   Lee, Chang Sup ^a   Lee, Hak Gu ^a   Hwang, Hui Yun ^a   Kim, Jong Woon ^a  

^a Korea Advanced Institute of Science and Technology (KAIST)   (South Korea)

Author keywords

[No Author keywords available]

Indexed keywords

DAMPING; DEFORMATION; PRODUCT DESIGN; ROBOTS; STIFFNESS;

DAMPING CAPACITY; DESIGN RULES;

COMPOSITE STRUCTURES;

AUTOMOTIVE TEXTILE; END USE; FIBER REINFORCED COMPOSITE; MACHINE; ROBOTICS; STIFFNESS;

EID: 4143112293     PISSN: 02638223     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compstruct.2004.04.044     Document Type: Article

References (53)

1. Asada H. Youcef-Toumi K. Direct drive robots, theory and practice 1987 The MIT Press MA
2. Tsai L.W. Robot analysis. The mechanics of serial and parallel manipulators 1999 John Wiley - Sons, Inc. NY
3. Lee D.G. Jeong K.S. Kim K.S. Kwak Y.K. Development of the anthropomorphic robot with carbon fiber epoxy composite materials Compos. Struct. 25 1993 313-324
4. Lee D.G. Kim K.S. Kwak Y.K. Manufacturing of a SCARA type direct-drive robot with graphite fiber epoxy composite materials Robotica 9 1991 219-229
5. Lee CS, Lee DG. Manufacturing of composite sandwich robot structures using co-cure bonding method. Compos Struct, accepted
6. Lee C.S. Lee D.G. Oh J.H. Kim H.S. Composite wrist blocks for double arm type robots for handling large LCD glass panels Compos. Struct. 57 2002 345-355
7. Lee DG. Manufacturing and testing of composite machine tool structures. Ph.D. thesis, MIT, 1985
8. Jeong K.S. Lee D.G. Kwak Y.K. Experimental investigation of the dynamic characteristics of carbon fiber epoxy composite thin beams Compos. Struct. 33 1995 77-86
9. Lazan BJ. Multiple band surface treatments for high damping. AFML-TR-65-269, OH, 1965
10. Nashif A.D. Jones D.I.G. Henderson J.P. Vibration damping 1985 John Wiley - Sons, Inc. NY
11. Sun C.T. Lu Y.P. Vibration damping of structural elements 1995 Prentice-Hall, Inc. NJ
12. Lee D.G. Manufacturing and testing of chatter free boring bars Ann. CIRP 37 1988 365-368
13. Lee D.G. Choi J.K. Design and manufacture of an aerostatic spindle bearing system with carbon fiber-epoxy composites J. Compos. Mater. 34 1997 1150-1175
14. Weck M. Koch A. Spindle-bearing systems for high-speed application in machine tools Ann. CIRP 42 1993 445-448
15. Tlusty G. Manufacturing process and equipment 2000 Prentice Hall
16. Koenigsberger F. Tlusty J. Machine tool structures 1 1970 Pergamon Press
17. Wardle F.P. Lacey S.J. Poon S.Y. Dynamic and static characteristics of a wide speed range machine tool spindle Precision 5 1983 175-183
18. Stone B.J. The state of the art in the measurement of the stiffness and damping of rolling element bearing Ann. CIRP 32 1982 529-583
19. Peter J. Damping in machine tool construction. In: Proceeding of Sixth International M.T.D.R Conference, 1965. p. 191-210
20. Hammill WJ, Andrew C. Vibration reduction with continuous damping inserts. In: Proceeding of 14th International M.T.D.R. Conference, 1973. p. 495-502
21. Vandeurxen V. Snoeys R. Peters J. Additive damping treatments for mechanical structures Ann. CIRP 1 1981 269-274
22. Lee D.G. Hwang H.Y. Kim J.K. Design and manufacture of a carbon fiber epoxy rotating boring bar Compos. Struct. 60 2003 115-124
23. Cook N.H. Manufacturing analysis 1996 Addison-Wesley Publishing
24. Harris G.M. Shock and vibration 4th ed. 1998 McGraw-Hill
25. Hoshi T. Vibration analysis of mechanical cutting 1990 Kegyo Chasakai Publishing Co., Ltd.
26. Setareh M. Use of semi-active tuned mass dampers for vibration control of force-excited structures Struct. Eng. Mech. 4 2001 341-356
27. Ema S. Marui E. Suppression of chatter vibration of boring tools using impact dampers Int. J. Mach. Tool Manu. 40 2000 1141-1156
28. Hahn R.S. Design of Lanchester damper for elimination of metal-cutting chatter Trans. ASME 73 1951 331-336
29. Kim K.J. Ha J.Y. Suppression of machine tool chatter using a viscoelastic dynamic damper ASME J. Eng. Ind. 109 1987 58-71
30. Kinra V.K. Wolfenden A. Mechanics and mechanism of material damping 1992 ASTM
31. Kang T.H. Chatter vibration in precision boring Mach. Tool Dev. Prod. Eng. Res. Conf. ASME 1963 171-189
32. Callister W.D.Jr. Materials science and engineering: an introduction 1997 John Wiley - Sons, Inc. [chapter 12]
33. Weeton J.W. Peters D.M. Thomas K.L. Engineer's guide to composite materials 1986 American Society for Metals [section 4]
34. Cho D.H. Lee D.G. Choi J.H. Manufacturing of one-piece automotive drive shaft with aluminum and composite materials Compos. Struct. 38 1997 309-319
35. Lee D.G. Bang K.G. Choi J.K. Development of composite pressing rollers for thin film processing J. Compos. Mater. 34 2000 770-790
36. Nagano S. Koizumi T. Fujii T. Tsujiuchi N. Ueda H. Kobe steel. Development of a composite boring bar Compos. Struct. 38 1997 531-539
37. Choi J.H. Lee D.G. An experimental study of the static torque capacity of the adhesively-bonded tubular single lap joint J. Adhes. 55 1996 245-260
38. Kim P.J. Lee D.G. Choi J.K. Grinding characteristics of carbon fiber epoxy composite hollow shafts J. Compos. Mater. 34 2000 2016-2035
39. Mallick P.K. Introduction: definitions, classifications and applications Mallick P.K. Composites engineering handbook 1997 Marcel Dekker NY
40. Beardmore P. Composite structures for automobiles Compos. Struct. 5 1986 163-176
41. Mallick P.K. Broutman L.J. Static and impact properties of laminated hybrid composites J. Test Eval. 5 1977 190-200
42. Cheon S.S. Lim T.S. Lee D.G. Impact energy absorption characteristics of glass fiber hybrid composites Compos. Struct. 46 1999 267-278
43. Lee D.G. Lim T.S. Cheon S.S. Impact energy absorption characteristics of composite structures Compos. Struct. 50 2001 381-390
44. Lee D.G. Cheon S.S. Impact characteristics of glass fiber composites with respect to fiber volume fraction J. Compos. Mater. 35 2001 27-56
45. Cheon S.S. Choi J.H. Lee D.G. Development of the composite bumper beam for passenger cars Compos. Struct. 32 1995 491-499
46. Gaudenzi P. Pascucci A. Barboni R. Horoschenkoff A. Analysis of a glass-fibre sandwich panel for car body constructions Compos. Struct. 38 1997 421-433
47. Cheon S.S. Lee D.G. Jeong K.S. Composite side-door impact beams for passenger cars Compos. Struct. 38 1997 229-239
48. Mallick P.K. Newman S. Composite materials technology 1990 Hanser Publishers NY [chapter 6]
49. Schmelz F. Seherr-Thoss C. Aucktor E. Universal joints and drive shafts 1992 Springer-Verlag Berlin [chapter 4]
50. Reimpell J. Stoll H. The automotive chassis 1996 Society of Automotive Engineers [chapter 1]
51. Rao M.D. He S. Dynamic analysis and design of laminated composite beams with multiple damping layers AIAA J. 31 4 1993 736-745
52. He S. Rao M.D. Residual stresses and delamination problems induced by co-curing of damped composite laminates J. Compos. Mater. 28 2 1994 112-129
53. Lee D.G. Kim J.W. Hwang H.Y. Torsional fatigue characteristics of aluminum/composite co-cured shafts with axial compressive preload J. Compos. Mater. 38 2004 737-756