Numerical modelling of shot peening process and corresponding products: Residual stress, surface roughness and cold work prediction

Surface and Coatings Technology

Volumn 205, Issue 19, 2011, Pages 4480-4494

  Mylonas, G I ^a   Labeas, G ^a  

^a UNIVERSITY OF PATRAS   (Greece)

Author keywords

Cold work; Numerical simulation; Residual stresses; Shot peening; Stress concentration factor; Surface roughness

Indexed keywords

COLD WORKS; COMPUTATIONAL COSTS; EXPERIMENTAL MEASUREMENTS; HIGH STRAIN RATES; IMPINGING ANGLE; MATERIAL BEHAVIOUR; NUMBER OF SHOTS; NUMERICAL MODELLING; NUMERICAL MODELS; NUMERICAL PARAMETERS; NUMERICAL SIMULATION; PARAMETRIC STUDY; PROCESS PARAMETERS; REALISTIC SIMULATION; STRESS CONCENTRATION FACTOR; STRESS CONCENTRATION FACTORS; TARGET PLATES; THREE-DIMENSIONAL NUMERICAL MODELS;

FATIGUE OF MATERIALS; MATHEMATICAL MODELS; NUMERICAL METHODS; RESIDUAL STRESSES; SHOT PEENING; STRAIN RATE; STRESS CONCENTRATION; SURFACE PROPERTIES; SURFACES; THREE DIMENSIONAL;

SURFACE ROUGHNESS;

EID: 79955917756     PISSN: 02578972     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.surfcoat.2011.03.080     Document Type: Article

References (41)

1. Al-Obaid Y.F. Three dimensional dynamic finite element analysis for shot peening mechanics. Computers and Structures 1990, 36(4):681-689.
2. Al-Hassani S.T.S., Kormi K., Webb D.C. "Numerical simulation of multiple shot impact", 7th International conference on Shot Peening (ICSP) 1999, Warsaw, Poland.
3. Meguid S.A., Shagal G., Stranart J.C., Daly J. Three-dimensional dynamic finite element analysis of shot peening induced residual stresses. Finite Elements in Analysis and Design 1999, 31:179-191.
4. Meguid S.A., Shagal G., Stranart J.C. Finite element modelling of shot peening residual stresses. Journal of Materials Processing Technology 1999, 92-93:401-404.
5. Schiffer K., Droste gen.Helling C. "Simulation of residual stress by shot peening". Computers and Structures 1999, 72:329-340.
6. Han K., Peric D., Owen D.R.J., Yu J. A combined finite/discrete element simulation of shot processes - part II: 3D interaction laws. Engineering Computations 2000, 17(6):680-702.
7. Guagliano M. Relating Almen intensity to residual stresses induced by shot peening: a numerical approach. Journal of Materials Processing Technology 2001, 110:277-286.
8. Meguid S.A., Shagal G., Stranart J.C. 3D FE analysis of peening of strain-rate sensitive materials using multiple impingement model. International Journal of Impact Engineering 2002, 27:119-134.
9. Schwarzer J., Schulze V., Vöhringer O. "Finite element simulation of shot peening - a method to evaluate the influence of peening parameters on surface characteristics", 8th International conference on Shot Peening (ICSP) 2002, Munich, Germany.
10. Wang T., Platts J., Levers A. "Finite element impact modelling for shot peen forming", 9th International conference on Shot Peening (ICSP) 2002, Munich, Germany.
11. Majzoobi G.H., Azizi R. "A 3-d numerical study of shot peening process using multiple shot impacts", 9th International conference on Shot Peening (ICSP) 2005, France, Paris.
12. Majzoobi G.H., Azizi R., Alavi Nia A. A three-dimensional simulation of shot peening process using multiple shot impacts. Journal of Materials Processing Technology 2005, 164-165:1226-1234.
13. Klemenz M., Hochrainer Th., Delonnoy L., Schulze V., Vöhringer O., Gumbsch P. "Similarity Rules for the Shot Peening Process Based", 9th International conference on Shot Peening (ICSP) 2005, France, Paris.
14. Klemenz M., Schulze V., Vöhringer O., Löhe D. Finite element simulation of the residual stress states after shot peening. Materials Science Forum 2006, 524-525:349-354.
15. Klemenz M., Zimmermann M., Schulze V., Löhe D. Numerical prediction of the residual stress state after shot peening. High Performance Computing In Science And Engineering 2007, 06(5):437-448.
16. Frija M., Hassine T., Fathallah R., Bouraoui C., Dogui A. Finite element modelling of shot peening process: prediction of the compressive residual stresses, the plastic deformations and the surface integrity. Materials Science and Engineering A 2006, 426:173-180.
17. Hong T., Ooi J.Y., Shaw B.A. A numerical study of the residual stress pattern from single shot impacting on a metallic component. Advances in Engineering Software 2008, 39:743-756.
18. Hong T., Ooi J.Y., Shaw B.A. A numerical simulation to relate the shot peening parameters to the induced residual stresses. Engineering Failure Analysis 2008, 15:1097-1110.
19. Kim T., Lee J.H., Lee H., Cheong S. An area-average approach to peening residual stress under multi-impacts using a three-dimensional symmetry-cell finite element model with plastic shots. Materials and Design 2010, 31:50-59.
20. Klemenz M., Schulze V., Rohr I., Löhe D. Application of the FEM for the prediction of the surface layer characteristics after shot peening. Journal of Materials Processing Technology 2009, 209:4093-4102.
21. Miao H.Y., Larose S., Perron C., Lévesque M. On the potential applications of a 3D random finite element model for the simulation of shot peening. Advances in Engineering Software 2009, 40:1023-1038.
22. Labeas G., Rodopoulos C.A., Spiner D. Relating shot peening process parameters to residual stresses - a computational/stochastic marriage. Electronic Incorporated - The Shot Peener - Shot Peening Library 2008, 22(3). http://www.shotpeener.com/library/spc/2008012.htm.
23. Prevey P.S., Cammett J.T. "The effect of shot peening coverage on residual stress, CW and fatigue in a Ni-Cr-Mo low alloy steel". 8th International conference on shot peening ICSP8 2003, 295-304.
24. Mylonas G.I., Labeas G.N. "Development of a numerical model for simulation of the induced residual stress of shot peening process". Deliverable 3c.2.4.4, Laboratory of Technology and Strength of materials (LTSM), University of Patras (UP), FP6 European project COMPACT 2005, AST4-CT-, -516078.
25. Fribourg G. "Precipitation and plasticity couplings in a 7xxx aluminium alloy: application to thermo-mechanical treatments for distortion correction of aerospace components". PhD Thesis, Institute Polytechnic Grenoble (INPG) 2009.
26. Moan G.D., Embury J.D. A study of the Bauschinger effect in Al-Cu alloys. Acta Metallurgica 1979, 27:903-914.
27. Proudhon H., Poole W.J., Wang X., Bréchet Y. The role of internal stresses on the plasticity of the Al-Mg-Si-Cu alloy AA6111. Philosophical Magazine 2008, 88(5):621-640.
28. da Costa Teixeira J., Cram D.G., Bourgeois L., Bastow T.J., Hill A.J., Hutchinson C.R. On the strengthening response of aluminum alloys containing shear-resistant plate-shaped precipitates. Acta Materialia 2008, 56:6109-6122.
29. Mylonas G.I., Labeas G.N., Pantelakis Sp.G. "High strain rate behaviour of aluminium alloys using split Hopkinson bar testing". Conference on Experimental Mechanics (ICEM13), Alexandroupolis, Greece 2007.
30. Al-Hassani S.T.S. "Mechanical aspects of residual stress development in shot peening", 1st International conference on Shot Peening (ICSP) 1981, France, Paris.
31. SAE Manual on Shot Peening Society of Automotive Engineers, Warrendale, USA, Fourth Edition 2001.
32. Mylonas G.I., Heckenberger U., Labeas G.N. "Investigation on shot peening induced residual stress field", International Conference on Distortion Engineering (IDE) 2008, Bremen, Germany.
33. Heckenberger U. "Report on the influence of shot peening process parameters and temperature evolution on residual stress". EADS Deutschland GmbH, FP6 European project COMPACT, AST4-CT- 2005, Deliverable 3c.2.2.5, 516078.
34. Dai K., Villegas J., Stone Z., Shaw L. Finite element modeling of the surface roughness of 5052 Al alloy subjected to a surface severe plastic deformation process. Acta Materialia 2004, 52:5771-5782.
35. Li J.K., Mei Y., Duo W., Renzhi W. An analysis of stress concentrations caused by shot peening and its application in predicting fatigue strength. Fatigue Fract. Engng Mater. Struct. 1992, 15(12):1271-1277.
36. Clausen R., Stangenberg J. "Roughness of Shot Peened Surfaces Definition and Measurement", 7th International Conference on Shot Peening (ICSP) 1999, Warsaw, Poland.
37. Rodopoulos C.A., Curtis S.A., de los Rios E.R., SolisRomero J. Optimisation of the fatigue resistance of 2024-T351 aluminiumalloys by controlled shot peening-methodology, results and analysis. International Journal of Fatigue 2004, 26:849-856.
38. Prevéy P.S., Cammett J.T. "The effect of shot peening coverage on residual stress, cold work and fatigue in a Ni-Cr-Mo low alloy steel". International Conference on Shot Peening, Garmisch-Partenkirchen, Germany 2002, Sept. 16-20,.
39. Kang X., Wang T., Platts J. Multiple impact modelling for shot peening and peen forming. Proc. IMechE Part B: J. Engineering Manufacture 2010, 224:689-697.
40. Zhang Z., Sun Q., Li C., Zhao W. Theoretical calculation of the strain-hardening exponent and the strength coefficient of metallic materials. Journal of Materials Engineering and Performance 2006, 15(1):19-22.
41. Kudryavtsev I.V., Rymynova Ye.V. The increasing hardness of steels as a result of cold working. Metal Science And Heat Treatment 1961, 3(9-10):444-447.