An area-average approach to peening residual stress under multi-impacts using a three-dimensional symmetry-cell finite element model with plastic shots

Materials and Design

Volumn 31, Issue 1, 2010, Pages 50-59

  Kim, Taehyung ^a   Lee, Jin Haeng ^a,b   Lee, Hyungyil ^a   Cheong, Seong kyun ^c  

^a Sogang University   (South Korea)

^b University of Tennessee Knoxville   (United States)

^c Seoul National University of Science and Technology   (South Korea)

Author keywords

Area averaged solution; Finite element analysis; Multi impact; Residual stress; Shot peening; Symmetry cell

Indexed keywords

ANALYTICAL METHOD; ANALYTICAL MODEL; ARC HEIGHT; AREA-AVERAGED SOLUTION; COMPRESSIVE RESIDUAL STRESS; EQUI-BIAXIAL STRESS; FE MODEL; FINITE ELEMENT ANALYSIS; FINITE ELEMENT MODELS; MULTI-IMPACT; SYMMETRY-CELL; THREE-DIMENSIONAL SYMMETRY;

CELL MEMBRANES; PLASTICS; RESIDUAL STRESSES; SHOT PEENING; STRENGTH OF MATERIALS; THREE DIMENSIONAL; TWO DIMENSIONAL; X RAY DIFFRACTION;

FINITE ELEMENT METHOD;

EID: 69549086217     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2009.07.032     Document Type: Article

References (38)

1. Kim T, Lee JH, Lee H. An effective 2D FE model with plastic shot for evaluation of peening residual stress. J Mater Process Technol, submitted for publication.
2. Kim T, Lee H, Lee JH. A 3D phenomenological FE model for unique solution of peening stress due to multi-impacts. Int J Numer Methods Eng, submitted for publication.
3. Song P.S., and Wen C.C. Crack closure and crack growth behavior in shot peened fatigued specimen. Eng Fract Mech 63 (1999) 295-304
4. Menig R.M., Pintschovius L., Schulze V., and Vöhringer O. Depth profiles of macro residual stress in thin shot peened plates determined by X-ray and neutron diffraction. Scripta Mater 45 (2001) 977-983
5. 2/Al composite using X-ray diffraction. Mater Sci Eng A 497 (2008) 374-377
6. th of a nitrided and shot peened low-alloy steel. Surf Coat Technol 202 (2008) 3072-3080
7. Feng B.X., Mao X.N., Yang G.J., Yu L.L., and Wu X.D. Residual stress field and thermal relaxation behavior of shot-peened TC4-DT titanium alloy. Mater Sci Eng A 512 (2009) 105-108
8. Al-Hassani STS. Mechanical aspects of residual stress development in shot peening. In: Proceedings of the 1st international conference on shot peening; 1981. p. 583-602.
9. Hills D.A., Waterhouse B., and Noble B. An analysis of shot peening. Int J Strain Anal 18 (1983) 95-100
10. Al-Obaid Y.F. A rudimentary analysis of improving fatigue life of metals by shot-peening. J Appl Mech 57 (1990) 307-312
11. Sinclair G.B., Follansbee P.S., and Johnson K.L. Quasi-static normal indentation of an elasto-plastic half-space by a rigid sphere II. Int J Solids Struct 21 (1985) 865-888
12. Levers A., Prior A., and Socie D. Multi-axial fatigue: analysis and experiments (1989), Society of Automotive Engineers, Inc., Warrendale p. 16-7
13. Schiffner K., and Helling C. Simulation of residual stresses by shot peening. Comput Struct 72 (1999) 329-340
14. Meguid S.A., Shagal G., Stranart J.C., and Daly J. Three-dimensional dynamic finite element analysis of shot-peening induced residual stresses. Finite Elem Anal Des 31 (1999) 179-191
15. Han K., Peric D., Owen D.R.J., and Yu J. A combined finite/discrete element simulation of shot peening processes part II: 3D interaction laws. Eng Comput 17 6 (2000) 680-702
16. Boyce B.L., Chen X., Hutchinson J.W., and Ritchie R.O. The residual stress state due to a spherical hard-body impact. Mech Mater 33 (2001) 441-454
17. Franchim A.S., De Campos V.S., Travessa D.N., and De Moura Neto C. Analytical modeling for residual stresses produced by shot peening. Mater Des 30 (2009) 1556-1560
18. Shivpuri R., Cheng X., and Mao Y. Elasto-plastic pseudo-dynamic numerical model for the design of shot peening process parameters. Mater Des 30 (2009) 3112-3120
19. Guagliano M. Relating Almen intensity to residual stresses induced by shot peening: a numerical approach. J Mater Process Technol 110 (2001) 227-286
20. Meguid S.A., Shagal G., and Stranart J.C. 3D FE analysis of peening of strain-rate sensitive materials using multiple impingement model. Int J Impact Eng 27 (2002) 119-134
21. Frija M., Hassine T., Fathallah R., Bouraoui C., and Dogui A. Finite element modelling of shot peening process: prediction of the compressive residual stresses, the plastic deformations and the surface integrity. Mater Sci Eng A 426 (2006) 173-180
22. Majzoobi G.H., Azizi R., and Alavi N.A. A three-dimensional simulation of shot peening process using multiple shot impacts. J Mater Process Technol 164-165 (2005) 1226-1234
23. Boo M.H., Oh S.W., Park Y.C., and Hirose Y. Studies on elastic deformation by X-ray stress measurement of WC-Co alloy. Study Ocean Technol 8 2 (1994) 105-114
24. Hong S.H., Lee D.W., Cho S.S., and Joo W.S. A study on the failure mechanism of turbine blade using X-ray diffraction and FEM. Int J Automot Technol 10 6 (2002) 150-157
25. Jacobsen B., Lienert U., Almer J., Poulsen H.F., and Pantleon W. Direct observation of strain in bulk subgrains and dislocation walls by high angular resolution three-dimensional X-ray diffraction. Mater Sci Eng A 483-484 (2008) 641-643
26. Prevey PS, Cammett JT. The effect of shot peening coverage on residual stress, cold work and fatigue in a Ni-Cr-Mo low alloy steel. In: Proceedings of the 8th international conference on shot peening; 2002. p. 295-304.
27. Kirk D, Hollyoak RC. Relationship between coverage and surface residual stress. In: Proceedings of 9th international conference on shot peening; 2005. p. 373-8.
28. ABAQUS User's Manual, Version 6.5. Pawtucket (RI): Hibbitt. Karlsson and Sorensen Inc.,; 2004.
29. Armero F., and Petocz E. Formulation and analysis of conserving algorithms for frictionless dynamic contact/impact problems. Comput Methods Appl Mech Eng 158 (1998) 269-300
30. Owen D.R.J., De Souza Neto E.A., Zhao S.Y., Peric D., and Loughran J.G. Finite element simulation of the rolling and extrusion of multi-phase materials: application to the rolling of prepared sugar cane. Comput Methods Appl Mech Eng 151 (1998) 479-495
31. SAE J442. Test strip. Holder and gage for shot peening. Society of Automotive Engineers Inc.,; 2004.
32. Torres M.A.S., and Voorwald H.J.C. An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel. Int J Fatigue 24 (2002) 877-886
33. SAE J443. Surface vehicle recommended practice. Society of Automotive Engineers Inc.,; 1984.
34. MIL-S-113165C. Shot peening of metal parts. Military Specifications; 1989.
35. AMS 2430L. Aerospace material specification. Society of Automotive Engineers Inc.,; 1993.
36. AMS-S-13165. Aerospace material specification. Society of Automotive Engineers Inc.,; 1997.
37. Menig RM, Schulze V, Vöhringer O. Residual stress relaxation and fatigue strength of AISI4140 under torsional loading after conventional shot peening, stress peening and warm peening. In: Proceedings of 8th international conference on shot peening; 2002. p. 311-6.
38. Chung S.J., and Back S.D. Effect of shot peening on fatigue properties in spring steel. Korean Soc Mech Eng A 22 6 (1998) 1009-1015