Monitoring and diagnosis for the DC-DC converter using the magnetic near field waveform

IEEE Transactions on Industrial Electronics

Volumn 58, Issue 5, 2011, Pages 1634-1647

  Chen, Yu ^a   Pei, Xuejun ^a   Nie, Songsong ^a   Kang, Yong ^a  

^a HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

Author keywords

DCDC power conversion; electromagnetic (EM) measurements; EM radiation; fault diagnosis; frequency domain analysis; neural networks applications; pattern classification; power system faults; pulse width modulation; switched mode power supplies

Indexed keywords

DC-DC POWER CONVERSION; ELECTROMAGNETIC (EM) MEASUREMENTS; EM RADIATION; FAULT DIAGNOSIS; NEURAL NETWORKS APPLICATIONS; PATTERN CLASSIFICATION; POWER SYSTEM FAULTS; SWITCHED MODE POWER SUPPLIES;

DC POWER TRANSMISSION; DC-DC CONVERTERS; ELECTRIC CONVERTERS; ELECTRIC POWER SUPPLIES TO APPARATUS; ELECTROMAGNETISM; MAGNETIC DOMAINS; NEURAL NETWORKS; PULSE WIDTH MODULATION;

FREQUENCY DOMAIN ANALYSIS;

EID: 79954459506     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2010.2051939     Document Type: Article

References (31)

1. M. A. S. K. Khan and M. A. Rahman, "Development and implementation of a novel fault diagnostic and protection technique for IPM motor drives," IEEE Trans. Ind. Electron., vol. 56, no. 1, pp. 84-92, Jan. 2009.
2. H. Razik, M. B. R. Correa, and E. R. C. da Silva, "A novel monitoring of load level and broken bar fault severity applied to squirrel-cage induction motors using a genetic algorithm," IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4615-4626, Nov. 2009.
3. G. R. Bossio, C. H. De Angelo, J. M. Bossio, C. M. Pezzani, and G. O. Garcia, "Separating broken rotor bars and load oscillations on IM fault diagnosis through the instantaneous active and reactive currents," IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4571-4580, Nov. 2009.
4. L. Frosini and E. Bassi, "Stator current and motor efficiency as indicators for different types of bearing faults in induction motors," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 244-251, Jan. 2010.
5. M. Nemec, K. Drobnic, D. Nedeljkovic, R. Fiser, and V. Ambrozic, "Detection of broken bars in induction motor through the analysis of supply voltage modulation," IEEE Trans. Ind. Electron., vol. 57, no. 8, pp. 2879- 2888, Aug. 2010.
6. M. Drif and A. J. Marques Cardoso, "The use of instantaneous- reactivepower signature analysis for rotor-cage-fault diagnostics in three-phase induction motors," IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4606- 4614, Nov. 2009.
7. J. Faiz and M. Ojaghi, "Instantaneous-power harmonics as indexes for mixed eccentricity fault in mains-fed and open/closed-loop driveconnected squirrel-cage induction motors," IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4718-4726, Nov. 2009.
8. S. Khomfoi and L. M. Tolbert, "Fault diagnostic system for a multilevel inverter using a neural network," IEEE Trans. Power Electron., vol. 22, no. 3, pp. 1062-1069, May 2007. (Pubitemid 46773697)
9. S. Khomfoi and L. M. Tolbert, "Fault diagnosis reconfiguration for multilevel inverter drive using AI-based techniques," IEEE Trans. Ind. Electron., vol. 54, no. 6, pp. 2954-2958, Dec. 2007.
10. T.-J. Kim, W.-C. Lee, and D.-S. Hyun, "Detection method for opencircuit fault in neutral-point-clamped inverter systems," IEEE Trans. Ind. Electron., vol. 56, no. 7, pp. 2754-2763, Jul. 2009.
11. P. Lezana, R. Aguilera, and J. Rodriguez, "Fault detection on multicell converter based on output voltage frequency analysis," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 2275-2283, Jun. 2009.
12. W. Sleszynski, J. Nieznanski, and A. Cichowski, "Open-transistor fault diagnostics in voltage-source inverters by analyzing the load currents," IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4681-4688, Nov. 2009.
13. D. Morinigo-Sotelo, L. A. Garcia-Escudero, O. Duque-Perez, and M. Perez-Alonso, "Practical aspects of mixed-eccentricity detection in PWM voltage-source-inverter-fed induction motors," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 252-262, Jan. 2010.
14. S. Karimi, A. Gaillard, P. Poure, and S. Haadate, "FPGA-based real-time power converter failure diagnosis for wind energy conversion systems," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4299-4308, Dec. 2008.
15. S. Y. Kim, K. Nam, H.-S. Song, and H.-G. Kim, "Fault diagnosis of a ZVS DC-DC converter based on DC-link current pulse shapes," IEEE Trans. Ind. Electron., vol. 55, no. 3, pp. 1491-1494, Mar. 2008. (Pubitemid 351447591)
16. A. M. R. Amaral and A. J. M. Cardoso, "Using input current and output voltage ripple to estimate the output filter condition of switch mode dc/dc converters," in Proc. IEEE SDEMPED, 2009, pp. 100-105.
17. L. Palma, M. H. Todorovic, and P. N. Enjeti, "Analysis of common-mode voltage in utility-interactive fuel cell power conditioners," IEEE Trans. Ind. Electron., vol. 56, no. 1, pp. 20-27, Jan. 2009.
18. A. Santolaria, "Effects of switching frequency modulation on the power converter's output voltage," IEEE Trans. Ind. Electron., vol. 56, no. 7, pp. 2729-2737, Jul. 2009.
19. K. Raggl, T. Nussbaumer, and J. W. Kolar, "Guideline for simplified differential-mode EMI filter design," IEEE Trans. Ind. Electron., vol. 57, no. 3, pp. 1031-1040, Mar. 2010.
20. Y. Chen, S. Nie, X. Pei, and Y. Kang, "State monitoring and fault diagnosis of the PWM converter using the magnetic field near the inductor components," in IEEE Proc. ECCE, 2010.
21. S. Nie, Y. Chen, X. Pei, and Y. Kang, "A DSP-based diagnostic system for DC-DC converter using the shape of voltage across the magnetic components," in IEEE Proc. ECCE, 2010.
22. Q. Aouine, C. Labarre, and F. Costa, "Measurement and modeling of the magnetic near field radiated by a buck chopper," IEEE Trans. Electromagn. Compat., vol. 50, no. 2, pp. 445-449, May 2008. (Pubitemid 351803223)
23. Langer eMV-Technik Company, LF1 User guidelines. [Online]. Available: http://www.langer-emv.de
24. M. M. Hernando, A. Fernandez, M. Arias, M. Rodriguez, Y. Alvarez, and F. Las-Heras, "EMI radiated noise measurement system using the source reconstruction technique," IEEE Trans. Ind. Electron., vol. 55, no. 9, pp. 3258-3265, Sep. 2008.
25. J. N. Reck, K. Hu, S. Li, H. Weng, D. G. Beetner, M. J. O'Keefe, D. S. Ramsay, and J. L. Drewniak, "Fabrication of two-layer thin-film magnetic-field microprobes on freestanding SU-8 photoepoxy," IEEE Trans. Device Mater. Rel., vol. 10, no. 1, pp. 26-32, Mar. 2010.
26. X. Qing and A. N. Chen, "Proximity effects of metallic environments on high frequency RFID reader antenna: Study and applications," IEEE Trans. Antennas Propag., vol. 55, no. 11, pp. 3105-3111, Nov. 2007. (Pubitemid 350218450)
27. M. F. Cabanas, M. G. Melero, C. H. Rojas, G. A. Orcajo, J. M. Cano, F. Pedrayes Gonzalez, J. G. Norniella, and S. Diaz Rozada, "Detection of insulation faults on disc-type winding transformers by means of leakage flux analysis," in Proc. IEEE SDEMPED, 2009, pp. 316-321.
28. M. K. Kazimierczuk and H. Sekiya, "Design of AC resonant inductors using area product method," in Proc. IEEE ECCE, 2009, pp. 994-1001.
29. K. W. Kam, D. Pormerenke, C.-W. Lam, and R. Steinfeld, "EMI analysis methods for synchronous buck converter EMI root cause analysis," in Proc. IEEE Int. Symp. EMC, 2008, pp. 658-664.
30. B. K. Bose, "Neural network applications in power electronics and motor drives-An introduction and perspective," IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 13-33, Feb. 2007.
31. A. Bhargava, D. Pommerenke, K. Kam, X. Chang, F. Centola, C.-W. Lam, and R. Steinfeld, "EMI prediction in switched power supplies by full-wave and non-linear circuit co-simulation," in Proc. IEEE Int. Symp. EMC, 2009, pp. 41-46.