Full-Field Strain Measurement and Identification of Composites Moduli at High Strain Rate with the Virtual Fields Method

Experimental Mechanics

Volumn 51, Issue 4, 2011, Pages 509-536

  Moulart, R ^a   Pierron, F ^a   Hallett, S R ^b   Wisnom, M R ^b  

^a ARTS ET MÉTIERS PARISTECH   (France)

^b UNIVERSITY OF BRISTOL   (United Kingdom)

Author keywords

Fibre composites; Full field measurement; Grid method; High strain rate; SHPB; UHS camera; Virtual Fields Method

Indexed keywords

FIBRE COMPOSITES; FULL-FIELD MEASUREMENT; GRID METHOD; HIGH STRAIN RATE; SHPB; UHS CAMERA; VIRTUAL FIELDS METHOD; GRID METHODS; HIGH STRAIN RATES;

ACCELERATION; CAMERAS; MECHANICAL PROPERTIES; POISSON RATIO; STRAIN GAGES; STRAIN MEASUREMENT; LOADING;

STRAIN RATE;

EID: 79953670567     PISSN: 00144851     EISSN: 17412765     Source Type: Journal    
DOI: 10.1007/s11340-010-9433-4     Document Type: Article

References (53)

1. Tiwari V, Sutton MA, McNeill SR, Xu S, Deng X, Fourney WL, Bretall D (2009) Application of 3D image correlation for full-field transient plate deformation measurements during blast loading. Int J Impact Eng 36: 862-874.
2. Reu PL, Miller TJ (2008) The application of high-speed digital image correlation. J Strain Anal 43: 673-688.
3. Tarigopula V, Hopperstad OS, Langseth M, Clausen AH, Hild F (2008) A study of localisation in dual-phase high-strength steels under dynamic loading using digital image correlation and FE analysis. Int J Solids Struct 45: 601-619.
4. Schmidt T, Gilat A (2008) 3D image correlation studies of geometry and materiakl property effects during split Hopkinson bar experiments. In: Proceedings of the XIth international congress and exposition on experimental and applied mechanics.
5. Kajberg J, Wikman B (2007) Viscoplastic parameter estimation by high strain-rate experiments and inverse modelling-speckle measurements and high-speed photography. Int J Solids Struct 47: 145-164.
6. Avril S, Pierron F, Sutton MA, Yan J (2008) Identification of elasto-visco-plastic parameters and characterization of Lüders behavior using digital image correlation and the virtual fields method. Mech Mater 40: 729-742.
7. Tiwari V, Sutton MA, McNeill SR (2007) Assessment of high speed imaging systems for 2D and 3D deformation measurements: methodology development and validation. Exp Mech 47: 561-579.
8. Honour J (2009) A brief history of principles used in high speed cameras. Imaging Sci J 57: 303-316.
9. Luo H, Lu H, Leventis N (2006) The compressive behavior of isocyanate-crosslinked silica aerogel at high strain rates. Mech Time-Depend Mater 10: 83-111.
10. Luo H, Churu G, Fabrizio EF, Schnobrich J, Hobbs A, Dass A, Mulik S, Zhang Y, Grady BP, Capecelatro A, Sotiriou-Leventis C, Leventis N (2008) Synthesis and characterization of the physical, chemical and mechanical properties of isocyanate-crosslinked vanadia aerogels. J Sol-Gel Sci Technol 48: 113-134.
11. Siviour CR (2009) A measurement of wave propagation in the split Hopkinson pressure bar. Meas Sci Technol 20: 065702 (5 pp).
12. Kirugulige MS, Tippur HV (2009) Measurement of fracture parameters for a mixed-mode crack driven by stress waves using image correlation technique and high-speed digital photography. Strain 45: 108-122.
13. Harding J, Welsh LM (1983) A tensile testing technique for fiber-reinforced composites at impact rates of strain. J Mater Sci 18: 1810-1826.
14. Harding J, Wood EO, Campbell JD (1960) Testing of materials at impact rates of strain. J Mech Eng Sci 2: 88-96.
15. Staab GH, Gilat A (1995) High-strain rate response of angle-ply glass epoxy laminates. J Compos Mater 29: 1308-1320.
16. Staab GH, Gilat A (1991) A direct-tension split Hopkinson bar for high strain-rate testing. Exp Mech 31: 232-235.
17. Li M, Wang R, Han M-B (1993) A Kolsky bar: tension, tension-tension. Exp Mech 33: 7-14.
18. Hamouda AMS, Hashmi MSJ (1998) Testing of composite materials at high rates of strain: advances and challenges. J Mater Process Technol 77: 327-336.
19. Sierakowski RL (1997) Strain rate effects in composites. Appl Mech Rev 50: 741-762.
20. Barre S, Chotard T, Benzeggagh ML (1996) Comparative study of strain rate effects on mechanical properties of glass fibre-reinforced thermoset matrix composites. Composites A 27: 1169-1181.
21. Shokrieh MM, Omidi MJ (2009) Tension behavior of unidirectional glass/epoxy composites under different strain rates. Compos Struct 88: 595-601.
22. Goldberg RK, Gilat A (2002) Experimental and computational characterization of the high strain rate tensile response of polymer matrix composites. In: 14th symposium on composite materials. Pittsburgh, PA.
23. Medina JL, Harding J (2000) The effect of strain rate on the through-thickness tensile stiffness and strength properties of fibre-reinforced epoxy composites. In: 6th international conference on mechanical and physical behaviour of materials under dynamic loading. Krakow, Poland.
24. Awerbuch J, Madhukar MS (1985) Notched strength of composite laminates: predictions and experiments-a review. J Reinf Plast Compos 4: 3-159.
25. Kazemahvazi S, Zenkert D, Burman M (2009) Notch and strain rate sensitivity of non-crimp fabric composites. Compos Sci Technol 69: 793-800.
26. Chen Y, Hallett SR (2008) High-strain rate effects on open hole tensile strength of composites. In: 4th international conference on composites testing and model identification (CompTest). Dayton. academic.udayton.edu/stevendonaldson/comptest2008. html.
27. Field JE, Walley SM, Proud WG, Goldrein HT, Siviour CR (2004) Review of experimental techniques for high rate deformation and shock studies. Int J Impact Eng 30: 725-775.
28. Piro J-L, Grédiac M (2004) Producing and transferring low-spatial-frequency grids for measuring displacement fields with the moiré and grid methods. Exp Tech 28: 23-26.
29. Surrel Y (1994) Moiré and grid methods: a signal-processing approach. In: Pryputniewicz RJ, Stupnicki J (eds) Interferometry '94: photomechanics, vol 2342. SPIE, Bellingham.
30. Moulart R, Rotinat R, Pierron F, Lerondel G (2007) On the realization of microscopic grids for local strain measurement by direct interferometric photolithography. Opt Lasers Eng 45: 1131-1147.
31. Finston MI (1985) Fundamentals of optical design in rotating mirror cameras. Opt Laser Technol 17: 83-88.
32. Kirugulige MS, Tippur HV, Denney TS (2007) Measurement of transient deformations using digital image correlation method and high-speed photography: application to dynamic fracture. Appl Opt 46: 5083-5096.
33. Moulart R, Avril S, Pierron F (2006) Identification of the through-thickness rigidities of a thick laminated composite tube. Composites A 37: 326-336.
34. Pierron F, Green B, Wisnom MR (2007) Full-field assessment of the damage process of laminated composite open-hole tensile specimens. Part I: methodology. Composites A 38: 2307-2320.
35. Bioucas-Dias J, Valadão G (2007) Phase unwrapping via graph cuts. IEEE Trans Image Process 16: 698-709.
36. Cleveland W, Loader C (1996) Smoothing by local regression: principles and methods. In: Haerdle W, Schimek MG (eds) Statistical theory and computational aspects of smoothing. Springer, Berlin, pp 10-49.
37. Avril S, Feissel P, Pierron F, Villon P (2008) Estimation of the strain field from full-field displacement noisy data: comparing finite elements global least squares and polynomial diffuse approximation. Eur J Comput Mech 17: 857-868.
38. Pierron F, Green B, Wisnom MR, Hallett SR (2007) Full-field assessment of the damage process of laminated composite open-hole tensile specimens. Part I: experimental results. Composites A 38: 2321-2332.
39. Grédiac M (1989) Principe des travaux virtuels et identification. C R Acad Sci 309: 1-5 (In French with abridged English version).
40. Grédiac M, Pierron F, Avril S, Toussaint E (2006) The virtual fields method for extracting constitutive parameters from full-field measurements: a review. Strain (An International Journal for Experimental Mechanics) 42: 233-253.
41. Grédiac M, Paris P-A (1996) Direct identification of elastic constants of anisotropic plates by modal analysis: theoretical and numerical aspects. J Sound Vib 195: 401-415.
42. Grédiac M, Fournier N, Paris P-A, Surrel Y (1998) Direct identification of elastic constants of anisotropic plates by modal analysis: experimental results. J Sound Vib 210: 643-659.
43. Giraudeau A, Pierron F (2005) Identification of stiffness and damping properties of thin isotropic vibrating plates using the virtual fields method. Theory and simulations. J Sound Vib 284: 757-781.
44. Giraudeau A, Guo B, Pierron F (2006) Stiffness and damping identification from full field measurements on vibrating plates. Exp Mech 46: 777-787.
45. Giraudeau A, Pierron F, Guo B (2010) An alternative to modal analysis for material stiffness and damping identification from vibrating plates. J Sound Vib 329: 1653-1672.
46. Grédiac M, Toussaint E, Pierron F (2002) Special virtual fields for the direct determination of material parameters with the virtual fields method. 1-principle and definition. Int J Solids Struct 39: 2691-2705.
47. Grédiac M, Toussaint E, Pierron F (2002) Special virtual fields for the direct determination of material parameters with the virtual fields method. 2-application to in-plane properties. Int J Solids Struct 39: 2706-2725.
48. Cui WC, Wisnom MR (1992) Contact finite element analysis of three- and four-point short-beam bending of unidirectional composites. Compos Sci Technol 45: 323-334.
49. Pierron F, Sutton MA, Tiwari V (2010) Ultra high speed DIC on a three point bending test mounted on a Hopkinson bar. In: 2010 SEM annual conference and exposition on experimental and applied mechanics. Indianapolis, USA.
50. Pierron F, Sutton MA, Tiwari V (2010) Ultra high speed DIC and Virtual Fields Method analysis of a three point bending impact test on an aluminium bar. Exp Mech. doi: 10. 1007/s11340-010-9402-y.
51. Sutton MA, Yan J, Avril S, Pierron F, Adeeb S (2008) Identification of heterogeneous constitutive parameters in a welded specimen: uniform stress and virtual fields methods for material property estimation. Exp Mech 48: 451-464.
52. Cooreman S, Lecompte D, Sol H, Vantomme J, Debruyne D (2008) Identification of mechanical material behaviour through inverse modeling and DIC. Exp Mech 48: 421-433.
53. Avril S, Pierron F, Pannier Y, Rotinat R (2008) Stress reconstruction and constitutive parameter identification in elastoplasticity using measurements of deformation fields. Exp Mech 48: 403-419.