The compressive behavior of isocyanate-crosslinked silica aerogel at high strain rates

Mechanics of Time-Dependent Materials

Volumn 10, Issue 2, 2006, Pages 83-111

  Luo, H ^a   Lu, H ^a   Leventis, N ^b,c  

^a Oklahoma State University   (United States)

^b NASA GLENN RESEARCH CENTER   (United States)

^c MISSOURI UNIVERSITY OF SCIENCE AND TECHNOLOGY   (United States)

Author keywords

Aerogel; Crosslinked silica aerogel; Digital image correlation; Dynamic failure; High speed photography; Nano porous materials; Nanofoam; Split Hopkinson pressure bar

Indexed keywords

AEROGELS; BRITTLENESS; CROSSLINKING; ENCAPSULATION; HIGH SPEED PHOTOGRAPHY; HYDROPHILICITY; IMAGE PROCESSING; POROUS MATERIALS; STRAIN RATE; THERMAL CONDUCTIVITY;

CROSSLINKED SILICA AEROGEL (CSA); DIGITAL IMAGE CORRELATION; DYNAMIC FAILURE; NANOFOAM; SPLIT HOPKINSON PRESSURE BAR (SHPB);

SILICA;

EID: 33750040236     PISSN: 13852000     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11043-006-9015-0     Document Type: Article

References (40)

1. Barthelat, F., Wu, Z., Prorok, B.C., Espinosa, H.D.: Dynamic torsion testing of nanocrystalline coating using high speed photography and digital image correlation. Exp. Mech. 43(3), 331-340 (2003)
2. Bertino, M.F., Hund, J.F., Zhang, G., Sotiriou-Leventis, C., Tokuhiro, A.T., Leventis, N.: Room temperature synthesis of noble metal clusters in the mesopores of mechanically strong silica-polymer aerogel composites. J. Sol.-Gel. Sci. Technol. 30(1), 43-48 (2004)
3. Bruck, H.A., McNeill, S.R., Sutton, M.A., Peters, W.H.: Digital image correlation using Newton-Raphson method of partial differental correction. Exp. Mech. 29(3), 261-267 (1989)
4. Chen, W., Zhou, B.: Constitutive behavior of Epon 828/T-403 at various strain rates. Mech. Time-Dep. Mater. 2(2), 103-111 (1998)
5. Chen, W., Zhang, B., Forrestal, M.J.: A split Hopkinson bar technique for low-impedance material. Exp. Mech. 39(2), 81-85 (1999)
6. Chen, W., Lu, F., Cheng, M.: Tension and compression testing of two polymers under quasi-static and dynamic loading. Polym. Test. 21(2), 113-121 (2002)
7. Chen, W., Luo, H.: Dynamic compressive testing of intact and damaged ceramics. Ceramic Eng. Sci. Proc. 24(3), 411-416 (2003)
8. Chen, W., Luo, H.: Dynamic compressive responses of intact and damaged ceramics from a single split Hopkinson pressure bar experiment. Exp. Mech. 44(2), 295-299 (2004)
9. Chu, T.C., Ranson, W.F., Sutton, M.A., Peters, W.H.: Applications of digital-image-correlation techniques to experimental mechanics. Exp. Mech. 25(2), 232-244 (1985)
10. Frew, D.J., Forrestal, M.J., Chen, W.: A split Hopkinson bar technique to determine compressive stress-strain data for rock materials. Exp. Mech. 41(1), 40-46 (2001)
11. Frew, D.J., Forrestal, M.J., and Chen, W.: Pulse-shaping techniques for testing brittle materials with a split Hopkinson pressure bar. Exp. Mech. 42(1), 93-106 (2002)
12. Frew, D.J., Forrestal, M.J., Chen, W.: Pulse shaping techniques for testing elastic-plastic material with a split Hopkinson pressure bar. Exp. Mech. 45(2), 186-195 (2005)
13. Fricke, J.: Aerogels-highly tenuous solids with fascinating properties. J. Non-Cryst. Solids 100, 69-173 (1988)
14. Gama, B.A., Lopatnikov, S.L., Gillespie, J.W.: Hopkinson bar experimental technique: A critical review. Appl. Mech. Rev. 57(4), 223-250 (2004)
15. Gibson, L.J.: Mechanical behavior of metallic foams. Annu. Rev. Mater. Sci. 30, 181-227 (2000)
16. Gray, G.T.: Classic split-Hopkinson pressure bar technique. Mech. Test. Eval. ASM Handbook 8, 462-476 (2000)
17. Katti, A., Shimpi, N., Roy, S., Lu, H., Fabrizio, E.F., Dass, A., Capadona, L.A., Leventis, N.: Chemical, physical, and mechanical characterization of isocyanate cross-linked amine-modified silica aerogels. Chem. Mater. 18(2), 285-296 (2006)
18. Knauss, W.G., Kenner, V.H.: On the hygrothermomechanical characterization of polyvinylacetate. J. Appl. Phys. 51(10), 5131-5136 (1980)
19. Knauss, W.G., Zhu, W.: Nonlinearly viscoelastic behavior of polycarbonate. I. Response under pure shear. Mech. Time. dep. Mater. 6(3), 231-269 (2002)
20. Leventis, N., Sotiriou-Leventis, C., Zhang, G., Rawashdeh, A.M.: Nanoengineering strong silica aerogels. Nano Lett. 2(9), 957-960 (2002)
21. Leventis, N., Palczer, A., McCorkle, L., Zhang, G., Sotiriou-Leventis, C.: Nanoengineered silica polymer composite aerogels with no need for supercritical fluid drying. J. Sol. Gel. Sci. Technol. 35(2), 99-105 (2005)
22. Lu, H., Vendroux, G., Knauss, W.G.: Surface deformation measurements of a cylindrical specimen by digital image correlation. Exp. Mech. 37(4), 433-439 (2000)
23. Lu, H., Cary, P.D.: Deformation measurements by digital image correlation: Implementation of a second-order displacement gradient. Exp. Mech. 40(4), 393-400 (2000)
24. Luo, H., Chen, W.: Dynamic compressive response of intact and damaged AD995 alumina. Int. J. Appl. Ceramic Technol. 1(3), 254-260 (2004)
25. Meador, M.A.B., Fabrizio, E.F., Ilhan, F., Dass, A., Zhang, G., Vassilaras, P., Johnston, J.C., Leventis, N.: Cross-linking amine-modified silica aerogels with epoxies: Mechanical strong lightweight porous materials. Chem. Mater. 17(5), 1085-1098 (2005)
26. Miner, M.R., Hosticka, B., and Norris, P.M.: The effects of ambient humidity on the mechanical properties and surface chemistry of hygroscopic silica aerogel. J. Non-Cryst. Solids 350, 285-289 (2004)
27. Ravichandran, G., Subhash, G.: Critical appraisal of limiting strain rates for compression testing of ceramics in a split Hopkinson pressure bar. J. Am. Ceramic Soc. 77(1), 263-267 (1994)
28. Pierre, A.C., Pajonk, G.M.: Chemistry of aerogels and their applications. Chem. Rev. 102(11), 4243-4265 (2002)
29. Peters, W.H., Ranson, W.F.: Digital imaging techniques in experimental stress analysis. Opt. Eng. 21(3), 427-432 (1982)
30. Song, B., Chen, W.: Dynamic stress equilibration in split Hopkinson pressure bar tests on soft materials. Exp. Mech. 44(3), 300-312 (2004)
31. Song, B., Chen, W., Dou, S., Winfree, N., Kang, J.H.: Strain-rate effects on elastic and early cell-collapse response of a polystyrene foam. Int. J. Impact Eng. 31(5), 509-521 (2005)
32. Sutton, M.A., Wolters, W.J., Ranson, W.F., McNeil, S.R.: Determination of displacements using an improved digital image correlation method. Image Vision Comput. 1(3), 133-139 (1983)
33. Sutton, M.A., Cheng, M., Peters, W.H., Chao, Y.J., McNeill, S.R.: Application of an optimized digital correlation method to planar deformation analysis. Image Vis. Comput. 4(3), 143-150 (1986)
34. Thayer, A.M., Houston, C.E.: Large chemical and materials companies target small nanotechnology firms for venture investing, collaborations, and product innovations, in "Nanomaterials" Cover Story in Chemical and Engineering News 81(35), Sept.1, 2003, pp15-22
35. Woignier, T., Reynes, J., Alaoui, A.H. et al.: Different kinds of structure in aerogels: relationships with the mechanical properties. J. Non-Cryst. Solids 241(1), 45-52 (1998)
36. Woignier, T., Phalippou, J.: Mechanical Strength of silica aerogels. J. Non-Cryst. Solids 100, 404-408 (1988)
37. Vendroux, G., Knauss, W.G.: Submicron deformation field measurements: Part 2. Improved digital image correlation. Exp. Mech. 38(2), 86-92 (1998)
38. Yang, L.M., Shim, V.P.W.: An analysis of stress uniformity in split Hopkinson bar test specimens. Int. J. Impact Eng. 31(2), 129-150 (2005)
39. Zhang, G., Dass, A., Rawashdeh, A.M., Thomas, J., Counsil, J.A., Sotiriou-Leventis, C., Fabrizio, E.F., Ilhan, F., Vassilaras, P., Scheiman, D.A., McCorkle, L., Palczer, A., Johnston, J.C., Meador, M.A., Leventis, N.: Isocyanate-crosslinked silica aerogel monoliths: Preparation and characterization. J. Non-Cryst. Solids 350, 152-164 (2004)
40. Zhao, H., Gary, G.: A new method for the separation of waves: Application to the SHPB Technique for an unlimited duration of measurements. J. Mech. Phys. Solids 45(7), 1185-1202 (1997)