Utilization of boron compounds as synergists with ammonium polyphosphate for fl ame retardant wood-polymer composites;Bor bileşiklerinin sinerjist olarak amonyum polifosfat ile alev geciktirici odun-polymer kompozitleri için deǧerlendirilmesi

Turkish Journal of Agriculture and Forestry

Volumn 35, Issue 2, 2011, Pages 155-163

  Kurt, Ramazan ^a   Mengeloǧlu, Fatih ^a  

^a KAHRAMANMARAS SUTCU IMAM UNIVERSITY   (Turkey)

Author keywords

Ammonium polyphosphate; Boron; Boron phosphate; Flame retardants; Polypropylene; Wood polymer composite

Indexed keywords

BORIC ACID; BORON; COMPOSITE MATERIALS; FLAME RETARDANTS; IMPACT STRENGTH; POLYPROPYLENES; SODIUM BORATE; WOOD;

AMMONIUM POLYPHOSPHATES; BORON PHOSPHATE; BURNING RATE; HALOGEN-FREE; MALEIC ANHYDRIDE POLYPROPYLENES; STRENGTH PROPERTY; WOOD POLYMER COMPOSITES; ZINC BORATE;

ZINC COMPOUNDS;

BORON; COMPOSITE; MECHANICAL PROPERTY; POLYMER; WOOD;

AMMONIUM COMPOUNDS; BORON; FIRE FIGHTING; FLAME RETARDANTS; IMPACT STRENGTH; INORGANIC ACIDS; MALEIC ANHYDRIDE; MECHANICAL PROPERTIES; POLYMER WOOD COMBINATIONS; POLYPROPYLENE; SAFETY EQUIPMENT; THERMOPLASTICS;

EID: 79953180066     PISSN: 1300011X     EISSN: None     Source Type: Journal    
DOI: 10.3906/tar-0910-508     Document Type: Article

References (54)

1. ASTM D635 (1997) Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastic in a Horizontal Position. American Society for Testing and Materials, Philadelphia.
2. ASTM D1037 (1998) Standard Test Methods for Evaluating Properties if Wood-Base Fiber and Particle Materials. American Society for Testing and Materials, Philadelphia.
3. ASTM D638 (2001a) Standard Test Method for Tensile Properties of Plastics American Society for Testing and Materials, Philadelphia.
4. ASTM D6662 (2001b) Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards American Society for Testing and Materials, Philadelphia.
5. ASTM D4442 (2003) Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials American Society for Testing and Materials, Philadelphia.
6. ASTM D6109 (2005a) Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products American Society for Testing and Materials, Philadelphia.
7. ASTM D256 (2005b) Standard Test Methods for Impact Resistance of Plastics and Electrical Insulating Materials American Society for Testing and Materials, Philadelphia.
8. ASTM D792 (2007) Standard Test Method for Density and Specific Gravity (Relative Density) of Plastics by Displacement American Society for Testing and Materials, Philadelphia.
9. Baysal E, Yali{dotless}nki{dotless}li{dotless}ç MK, Çolak M, Gönültaş O (2003) Combustion properties of calabrian pine (Pinus brutia Ten.) wood treated with vegetable tanning extracts and boron compounds. Turk J Agric For 27: 245-252.
10. Baysal E, Yali{dotless}nki{dotless}li{dotless}ç MK, Alti{dotless}nok M, Sönmez A, Peker H, Çolak M (2007) Some physical, biological, mechanical and fire properties of wood polymer composite pretreated with boric acid and borax mixture. Constr Build Mater 21: 1879-1885.
11. Camino G, Costa L, Trossarelli L (1984) Study of the mechanism of intumescence in fire retardant polymers 2: Mechanism of action in polypropylene-ammonium polyphosphate pentaerythritol mixtures. Polym Degrad Stabil 7: 25-31.
12. Chiang W, Hu HCH (2001) Phosphate-containing flame-retardant polymers with good compatibility to polypropylene 2; effect of the flame retardant polymers on polypropylene. J Appl Polym Sci 82: 2399-2403.
13. Clariant (2008a) Ammonium Polyphosphate / Exolit AP 422, Product Data Sheet. Muttenz.
14. Clariant (2008b) Licomont AR 504, Product Data Sheet. Muttenz.
15. Clemons C (2002) Wood-plastic composites in the United States; the interfacing of two industries. Forest Prod J 52: 10-18.
16. Çolakoǧlu G, Çolak S, Aydi{dotless}n İ, Yi{dotless}ldi{dotless}z ÜÇ, Yi{dotless}ldi{dotless}z S (2003) Effect of boric acid treatment on mechanical properties of laminated veneer lumber. Silva Fenn 37: 505-510.
17. Dhamodaran TK, Gnanaharan R (2007) Boron impregnation treatment of eucalyptus grandis wood. Bioresource Technol 98: 2240-2242.
18. Eti Holding (2003) Çinko Borat Üretimi Ön Fizibilite Etüdü, Eti Holding A.Ş. Genel Müdürlüǧü, Ankara.
19. Green J (2000) Phosphorus-containing flame retardants. In: Fire Retardancy of Polymeric Materials, (Eds. AF Grand, CA Wilkie). Marcel Dekker, New York, pp. 147-170.
20. Hafi{dotless}zoǧlu H, Yali{dotless}nki{dotless}li{dotless}ç MK, Yi{dotless}ldi{dotless}z UC, Baysal E, Demirci Z, Peker H (1994) Türkiye Bor Kaynaklari{dotless}ni{dotless}n Odun Koruma (Emprenye) Endüstrisinde Deǧerlendirme İmkanlari{dotless}. TÜBİTAK Projesi, TOAG-875, Ankara.
21. Horrocks AR (2001) Textiles. In: Fire Retardant Materials (Eds. AR Horrocks, D Price). Woodhead Publishing Limited, Cambridge, pp. 128-181.
22. Jimenez M, Duquesne S, Bourbigot S (2006a) Characterization of the performance of an intumescent fire protective coating. Suf Coat Tech 201: 979-987.
23. Jimenez M, Duquesne S, Bourbigot S (2006b) Intumescent fire protective coating; toward a better understanding of their mechanism of action. Thermochim Acta 449: 16-26.
24. Kartal SN (2006) Combined effect of boron compounds and heat treatments on wood properties: Boron release and decay and termite resistance. Holzforschung 60: 455-458.
25. Klyosov AA (2007) Wood-Plastic Composites. Wiley-Interscience, Hoboken.
26. Kurt R, Mengeloǧlu F (2008) The effect of boric acid / borax treatment on selected mechanical and combustion properties of poplar laminated veneer lumber. Wood Res 53: 113-120.
27. Laks PE, Quan X, Palardy RD (1994) Preservative system for OSB panels. Structural Board Association, Athens.
28. Laks PE, Manning MJ (1995) Preservation of wood composites with zinc borate. The International Research Group on Wood Preservation, Document No: IRG/WP/95-30074.
29. Le Bras, M, Duquesne S, Fois M, Grisel M, Poutch F (2005) Intumescent polypropylene/flax blends: a preliminary study. Polym Degrad Stabil 88: 80-84.
30. Le Van S (1984) Chemistry of fire retardancy. In: The Chemistry of Solid Wood (Ed. RM Rowell). Advances in Chemistry Series 207, American Chemical Society, Washington, D.C., pp. 531-574.
31. Li J, Li B, Zhang XC, Su RZ (2001) The study of flame retardants on the thermal degradation and charring process of manchurian ash lignin in the condensed phase. Polym Degrad Stabil 72: 493-498.
32. Li B, He JM (2004) Investigation of mechanical property, flame retardancy and thermal degradation of LLDPE-wood-fibre composites. Polym Degrad Stabil 83: 241-246.
33. Mali J, Sarsama P, Suomi-Lindberg L, Metsä-Kortelainen S, Peltonen J, Vilkki M, Koto T, Tiisala S (2003) Woodfibre-Plastic Composites. VTT Technical Research Centre of Finland Report.
34. Mengeloǧlu F, Matuana LM, King JA (2000) Effects of impact modifiers on the properties of rigid PVC/wood-fiber composites. J Vinyl Addit Techn 6: 153-157.
35. Mengeloǧlu F, Matuana LM (2001) Foaming of rigid PVC/woodfl our composites through a continuous extrusion process. J Vinyl Addit Techn 7: 142-148.
36. Mengeloǧlu F, Karakuş K (2008) Polymer-composites from recycled high density polyethylene and waste lignocellulosic materials. Fresenius Environ Bull 17: 211-217.
37. Montaudo G, Scamporrino E, Puglisi C, Vitalini D (1985) Intumescent flame-retardant for polymers 3: The polypropylene-ammonium polyphosphate-polyurethane system. J Appl Polym Sci 30: 1449-60.
38. Mosnacek J, Basfar AA, Shukri TM, Bahattab MA (2008) Polyethylene vinyl acetate / low density polyethylene / ammonium polyphosphate composites cross-linked by dicumyl peroxide for wire and cable applications. Polym J 40: 460-464.
39. Örs Y, Atar M, Peker H (1999) The effect of some boron compounds and water repellents on the fire resistance properties of scotch pine wood. Turk J Agric For 23: 501-509.
40. Özçiftçi A (2008) Impact of impregnation with boron compounds on the bonding strength of wood materials. Constr Build Mater 22: 541-545.
41. Pendelton DE, Hoffard TA, Adcock T, Woodward B, Wolcott MP (2002) Durability of Extruded HDPE/Wood Composite. Forest Prod J 56: 21-27.
42. Petkim (2008) Polypropylene (MH418) product properties. Petkim, İzmir.
43. Qui W, Endo T, Hirotsu T (2006) Structure and properties of composites of highly crystalline cellulose with polypropylene; effects of polypropylene molecular weight. Eur Polym J 42: 1059-1068.
44. Rowell RM, Young RA, Rowell JK (1997) Paper and composites from agrobased resources. Lewis, New York.
45. Sain M, Park SH, Suhara F, Law S (2004) Flame retardant and mechanical properties of natural fibre-PP composites containing magnesium hydroxide. Poly Degrad Stabil 83: 363-367.
46. SAS (2001) SAS/Sat Release 8.2. SAS Institute, Cary.
47. Savides C, Granzow A, Cannelongo JF (1979) Phosphine based flame retardants for polypropylene. J Appl Polym Sci 23: 2639-2652.
48. Schartel B, Braun U, Schwarz U, Reinemann S (2003) Fire retardancy of polypropylene/flax blends. Polymer 44: 6241-50.
49. Suchsland O, Woodson GE (1986) Fiberboard manufacturing practices in the United States. U.S. Department of Agriculture, Forest Service, Agriculture Handbook No: 640, Madison.
50. Tangram (2002) Wood-plastic composites; a technical review of materials, processes and applications. Tangram Technology Limited, Hitchin.
51. Toker H (2007) Borlu bileşiklerin aǧaç malzemenin bazi{dotless} fiziksel, mekanik ve biyolojik özelliklerine etkilerinin belirlenmesi. Gazi Üniversitesi, Fen Bilimleri Enstitüsü, Toktora Tezi, Ankara.
52. Wang W, Morrell JJ (2004) Water sorption characteristics of two wood-plastic composites. Forest Prod J 54: 209-212.
53. Wang FQ, Zhang ZJ, Wang QW, Tang JY (2007) Fire retardant and smoke-suppressant performance of an intumescent waterborne amino-resin fire retardant coating for wood. Sci Silvae Sinicae 43: 117-121.
54. Yali{dotless}nki{dotless}li{dotless}ç MK, Imamura Y, Takahashi M, Demirci Z (1998) Effect of boron addition to adhesive and/or surface coating on fire retardant properties of particleboard. Wood Fiber Sci 30: 348-359.